Sharif Digital Repository

Nowadays, one of the most important challenges in developing greenhouses is meeting their energy demand. The other challenge is the high water consumption of evaporative-cooling systems in arid and semi-arid regions. In this study, a integrated dynamic model is developed to determine the greenhouse relative humidity, carbon dioxide, and temperature, considering transpiration. The model is applied to a greenhouse utilizing a ground to air heat transfer system, located in the Alborz province of Iran and the results are validated with experimental data. Energy and water performance of the greenhouse are evaluated for the case study greenhouse. Then, the model is applied to a greenhouse (similar... 

Miniaturization of electronic devices with portable, flexible and wearable characteristics created a great demand for high-performance microscale energy storage devices with lightweight and flexible properties. Among the energy storage devices, wire-shaped supercapacitors (WSSCs) have recently received tremendous attention due to their tiny volume, wearability, high flexibility and potential applications in the next-generation portable/wearable electronic devices. Herein, we successfully fabricated a porous dendritic Ni-Cu film on Cu wire substrate (CWE) for fabrication of high-performance wire-type supercapacitors. The porous structure with dendritic morphology provides a high surface area,... 

In this study, a jet propulsion JP combustor is studied numerically to investigate the combustor wall temperature influences on the soot characteristics emitted at its exhaust. There are a number of ways to control the combustor wall temperatures benefiting from different wall cooling technologies. Irrespective of using different high technology cooling systems, it is important to recognize how the wall temperature can affect the soot emission from one specific JP engine. Before examining the main combustor, it is important to assess the accuracy of the computational fluids dynamics (CFD) tool via solving a benchmark problem. In this regard, the predicted flame structure for the benchmark... 

Costly and time-consuming approaches for solder joint lifetime estimation in electronic systems along with the limited availability and incoherency of data challenge the reliability considerations to be among the primary design criteria of electronic devices. In this paper, an iterative machine learning framework is designed to predict the useful lifetime of the solder joint using a set of self-healing data that reinforces the machine learning predictive model with thermal loading specifications, material properties, and geometry of the solder joint. The self-healing dataset is iteratively injected through a correlation-driven neural network to fulfill the data diversity. Outcomes show a... 

Costly and time-consuming approaches for solder joint lifetime estimation in electronic systems along with the limited availability and incoherency of data challenge the reliability considerations to be among the primary design criteria of electronic devices. In this article, an iterative machine learning framework is designed to predict the useful lifetime of the solder joint using a set of self-healing data that reinforce the machine learning predictive model with thermal loading specifications, material properties, and geometry of the solder joint. The self-healing dataset is iteratively injected through a correlation-driven neural network (CDNN) to fulfill the data diversity. Outcomes... 

In this work, a three-dimensional numerical model is developed to investigate the performance of a photovoltaic thermal system integrated with a thermoelectric generator module (PVT/TE). Furthermore, the effects of various operating parameters such as solar radiation, coolant mass flow rate, and inlet and ambient temperatures on the performance of both the PVT and PVT/TE systems are investigated and compared. Based on the obtained results, the electrical efficiency of the PVT/TE system, when exposed to solar radiation of 600 and 1000 W/m2, is 6.23% and 10.41% higher than that of the PVT system, respectively. Besides, the electrical efficiency of the PVT and PVT/TE by increasing the inlet... 

As one of the cleanest energies, hydrogen has attracted much attention over the past decade. Hydrogen can be produced using water electrolysis in a Proton Exchange Membrane Electrolysis Cell (PEMEC). In the present study, the performance of the PEMEC, powered by the Photovoltaic-Thermal (PVT) system, is scrutinized. It is considered that the PVT system provides the required electrical power of the PEMEC and preheats the feedwater. A comprehensive numerical model of the coupled PVT-PEMEC system is developed. The model is used to investigate the effect of various operating parameters, including solar radiation intensity, inlet feedwater temperature, and feedwater mass flow rate, on the... 

As one of the cleanest energies, hydrogen has attracted much attention over the past decade. Hydrogen can be produced using water electrolysis in a Proton Exchange Membrane Electrolysis Cell (PEMEC). In the present study, the performance of the PEMEC, powered by the Photovoltaic-Thermal (PVT) system, is scrutinized. It is considered that the PVT system provides the required electrical power of the PEMEC and preheats the feedwater. A comprehensive numerical model of the coupled PVT-PEMEC system is developed. The model is used to investigate the effect of various operating parameters, including solar radiation intensity, inlet feedwater temperature, and feedwater mass flow rate, on the... 

Extraction of thermal heat from a salinity-gradient solar pond (SGSP) as a way of accumulating solar energy, stockpiling and taking merit of it for medium and low temperature demands is presented as an interesting topic in recent decades. This reliable supply of heat can be used for low-temperature refrigeration systems to yield cooling load for residential applications. For this purpose, theoretical investigation of ejector refrigeration cycle (ERC) driven by a SGSP is carried out to produce cooling output. Also, thermoelectric generator (TEG) is used as a potential device replacing condenser of the ERC for the sake of bolstering performance of the fundamental system by producing power,... 

In this study, a vapor-compression cooling system utilizing different phase change materials (PCMs) has been studied whereby the electricity consumption peak load is shifted. More specifically, the dynamic performance of cooling systems with and without using PCM is evaluated for the hottest day of the year. The proposed system uses the cooling energy to freeze, or “discharge” the PCM during nighttime when the cooling load is minimally needed and uses the stored thermal energy during the peak load hours by melting, or “charging” the PCM. This leads to better performance during peak load hours when higher cooling loads are needed. Different PCMs including oleic acid, SP224A, CL, CaCl2·6H2O... 

A vapor-compression cooling system utilizing PCM is studied whereby the electricity consumption peak load is shifted. More specifically, the dynamic performance of the cooling system with and without PCM is evaluated and is presented with details on the hottest day of the year in Tehran, Iran. The proposed system uses the cooling energy to freeze or “discharge” the PCM during nighttime when the cooling load is minimally needed and uses the stored cooling energy during the peak load hours by melting or “charging” the PCM. This leads to better performance during the peak load hours when higher cooling loads are required. Oleic acid was chosen as PCM. The simulation was performed in EES... 

Friction stir welding (FSW) parameters, such as tool material, tool geometry, tilt angle, tool rotational speed, welding speed, and axial force play a major role in the weld quality of titanium alloys. Because of excessive erosion, tool material and geometry play the main roles in FSW of titanium alloys. Therefore, in the present work for the first time, tool material and geometry, tool tilt angle, cooling system and shielding gas effects on macrostructure, microstructure, and mechanical properties of pure titanium weld joint were investigated. Result of this research shows that Ti can be joined by the FSW, using a tool with a shoulder made of tungsten (W) and simple pin made of tungsten... 

Demand response (DR) as a state-of-the-art program is accommodated in the energy efficiency contexts of the smart grid. Lack of the customer knowledge about how to respond to the time-differentiated tariffs and offered controlling signals is the major obstacle in the way of broad DR implementing. As a solution, an optimization method, namely load control (LC), is proposed to automatically control the on/off status of the responsive appliances in a smart home. This paper focuses on the direct load control (DLC) program in the category of incentive-based DR programs. LC is extended to consider inconvenience cost of the DLC implementation for DLC program participants. Outputs of the extended LC... 

Demand response (DR) as a state-of-the-art program is accommodated in the energy efficiency contexts of the smart grid. Lack of the customer knowledge about how to respond to the time-differentiated tariffs and offered controlling signals is the major obstacle in the way of broad DR implementing. As a solution, an optimization method, namely load control (LC), is proposed to automatically control the on/off status of the responsive appliances in a smart home. This paper focuses on the direct load control (DLC) program in the category of incentive-based DR programs. LC is extended to consider inconvenience cost of the DLC implementation for DLC program participants. Outputs of the extended LC... 

Thermal power generation needs great volumes of water for cooling purposes. A multi-period Low Water Generation Expansion Planning (LW-GEP) model is proposed to plan the future generation mix including type, capacity, time of installation, and proper cooling system of generation technologies to supply the future electric peak loads under the water resource limitations. Different types of generation technologies with conventional and modern cooling systems are considered as expansion candidates in the proposed LW-GEP model. The access of candidate and existing power plants to the water resources are considered. Renewable resources as water smart solutions are integrated in the proposed energy... 

Wind turbine size has increased to megawatt capacity, and the related technologies and facilities have improved, including the cooling systems. Currently, all of the heat generated by wind turbine components is wasted to the environment. This study presents a conceptual design of a novel method for waste heat recovery of a wind turbine using an organic Rankine cycle (ORC). An organic Rankine cycle is implemented to the wind turbine as a part of the cooling system. The proposed system is thermodynamically modeled to evaluate the amount of recovered energy. Seven working fluids are chosen and investigated in the simulations to estimate the working fluid effect. The results revealed that the... 

Liquid air energy storage is one of the most recent technologies introduced for grid-scale energy storage. As the title implies, this technology offers energy storage through an air liquefaction process. High energy storage density, no geographical limitation, and applicability for large-scale uses are some of the advantages of this technology. To improve the performance and environmental friendliness of the conventional design of this technology, a novel liquid air energy system combined with high-temperature thermal energy storage, thermoelectric generator, and organic Rankine cycle is proposed in the present article. The thermal energy storage unit removes the need for the conventional... 

Using natural draft dry air cooling systems in the power plant cycle is one of the proposed solutions for less water consumption. But the wind blowing will cause decreasement of cooling system performance in the power plants that work with the Rankin cycle. Therefore, it is important to know the right amount of wind speed to make the right decision to prevent reducing generating power or provide the right solution to improve the performance of the power plant cooling system. There are many methods of calibration of sensors in the world. But using optimization techniques or stochastic methods that do not require physical facilities and additional costs is almost a new approach. Therefore, in... 

Heat pipes are useful devices in heat transfer and particularly, in cooling systems. Given the high demand for cooling systems in various applications, an improvement in the performance of heat pipes has gained much attraction in recent years. In this study, the effects of utilizing working fluids with different thermal properties on the performance of pulsating heat pipes (PHP) are experimentally studied. Hence, nano-encapsulated phase change material (NPCM), reduced graphene oxide nanosheets, and their mixture, as a novel hybrid nanofluid, are prepared and dispersed in water as a working fluid. NPCM at 3 concentrations of 5, 10, and 20 g/L, as well as nanosheets at three concentrations of... 

In the recent researches HVAC with a based desiccant dehumidifier with a low ambient impact is more efficient in comparison to the traditional systems. Hybrid desiccant cooling systems can be used to control indoor air quality in buildings. This paper presents an integrated energy, entropy and exergy analysis of a hybrid desiccant cooling system compare to a compression system based on first and second laws of thermodynamic. The main objective is the use of a method called exergy costing applied to a conventional compression system that has been chosen to provide the proper conditioned air for a building in hot and humid condition. By applying the same method for the equivalent hybrid...