Sharif Digital Repository

The aim of this paper is to develop the technical knowledge, especially the optimum geometries, for the design and manufacturing of a supersonic gas-gas ejector for a wasteheat driven vehicle cooling system. Although several studies have been performed to investigate the effects of geometrical configurations of gas-gas ejectors, a progressive design methodology of an ejector compressor for application to a vehicle cooling system has not yet been described. First, an analytical model for calculation of the ejector optimum geometry for a wide range of operating conditions is developed, using R134a as the working fluid with a rated cooling capacity of 2.5 kW. The maximum values of entrainment... 

An optimal performance film cooling implies a high cooling effectiveness along with a wide surface cooling coverage. During the past decades, film cooling effectiveness has been well defined with a specific formula to evaluate the quality of a cooling system. However, despite numerous research on film cooling, there is still no explicit parameter to quantify how well a coolant film is spread over a hot surface. This work introduces a new coefficient namely cooling uniformity coefficient (CUC) to evaluate how well a coolant film is spread over a surface that is being cooled. Four different cases at two blowing ratios of 0.5 and 1.5 are studied. Three cases are ordinary single jets with... 

High-altitude test facilities are usually used to evaluate the performance of space mission engines. The supersonic exhaust diffuser, a main part of high-altitude test facility, provides the required test cell vacuum conditions by self-pumping the nozzle exhaust gases to the atmosphere. However, the plume temperature is often much higher than the temperature the diffuser structure is able to withstand, usually above 2500 K. In this study, an efficient cooling system is designed and analyzed to resolve the thermal problem. A water spray cooling technique is preferred among various existing techniques. Here, a new algorithm is developed for a spray cooling system for a supersonic exhaust... 

Wind towers or wind catchers, as passive cooling systems, can provide natural ventilation in buildings located in hot, arid regions. These natural cooling systems can provide thermal comfort for the building inhabitants throughout the warm months. In this paper, a modular design of a wind tower is introduced. The design, called a modular wind tower with wetted surfaces, was investigated experimentally and analytically. To determine the performance of the wind tower, air temperature, relative humidity (RH) and air velocity were measured at different points. Measurements were carried out when the wind speed was zero. The experimental results were compared with the analytical ones. The results... 

The yearly thermo-economic performance is dynamically investigated for three solar heating and cooling systems: solar heating and absorption cooling (SHAC), solar heating and ejector cooling (SHEC), and heating and solar vapor compression cooling (HSVC). First, the effects of important design parameters on the thermo-economic performance of the systems to supply the heating and cooling loads of the building are evaluated. The systems are parametrically analyzed with the weather conditions of Tehran, Iran. The results show that the life cycle costs (LCC) of the SHAC and HSVC systems are alike and much lower than those of the SHEC system. The HSVC system exhibits the best performance from... 

The yearly thermo-economic performance is dynamically investigated for three solar heating and cooling systems: solar heating and absorption cooling (SHAC), solar heating and ejector cooling (SHEC), and heating and solar vapor compression cooling (HSVC). First, the effects of important design parameters on the thermo-economic performance of the systems to supply the heating and cooling loads of the building are evaluated. The systems are parametrically analyzed with the weather conditions of Tehran, Iran. The results show that the life cycle costs (LCC) of the SHAC and HSVC systems are alike and much lower than those of the SHEC system. The HSVC system exhibits the best performance from... 

Heat pipes are useful devices in heat transfer and particularly, in cooling systems. Given the high demand for cooling systems in various applications, an improvement in the performance of heat pipes has gained much attraction in recent years. In this study, the effects of utilizing working fluids with different thermal properties on the performance of pulsating heat pipes (PHP) are experimentally studied. Hence, nano-encapsulated phase change material (NPCM), reduced graphene oxide nanosheets, and their mixture, as a novel hybrid nanofluid, are prepared and dispersed in water as a working fluid. NPCM at 3 concentrations of 5, 10, and 20 g/L, as well as nanosheets at three concentrations of... 

In this study, a vapor-compression cooling system utilizing different phase change materials (PCMs) has been studied whereby the electricity consumption peak load is shifted. More specifically, the dynamic performance of cooling systems with and without using PCM is evaluated for the hottest day of the year. The proposed system uses the cooling energy to freeze, or “discharge” the PCM during nighttime when the cooling load is minimally needed and uses the stored thermal energy during the peak load hours by melting, or “charging” the PCM. This leads to better performance during peak load hours when higher cooling loads are needed. Different PCMs including oleic acid, SP224A, CL, CaCl2·6H2O... 

This paper presents a mathematical model for simultaneous deployment of protective devices (PDs) and controlling devices (CDs) in distribution networks. The PDs include fuses and reclosers and the CDs are remote controlled switches (RCSs) and manual switches (MSs). The model is to minimize equipment costs as well as sustained and momentary interruption costs. It considers the coordination of fuses and reclosers during temporary faults involving fuse saving and fuse blowing schemes. The model is in mixed integer programming (MIP) fashion which can be effectively solved with available solvers. The performance of the proposed model is verified through applying it to Bus 4 of Roy Billinton test... 

This paper presents a mathematical model for simultaneous deployment of protective devices (PDs) and controlling devices (CDs) in distribution networks. The PDs include fuses and reclosers and the CDs are remote controlled switches (RCSs) and manual switches (MSs). The model is to minimize equipment costs as well as sustained and momentary interruption costs. It considers the coordination of fuses and reclosers during temporary faults involving fuse saving and fuse blowing schemes. The model is in mixed integer programming (MIP) fashion which can be effectively solved with available solvers. The performance of the proposed model is verified through applying it to Bus 4 of Roy Billinton test... 

Costly and time-consuming approaches for solder joint lifetime estimation in electronic systems along with the limited availability and incoherency of data challenge the reliability considerations to be among the primary design criteria of electronic devices. In this paper, an iterative machine learning framework is designed to predict the useful lifetime of the solder joint using a set of self-healing data that reinforces the machine learning predictive model with thermal loading specifications, material properties, and geometry of the solder joint. The self-healing dataset is iteratively injected through a correlation-driven neural network to fulfill the data diversity. Outcomes show a... 

Costly and time-consuming approaches for solder joint lifetime estimation in electronic systems along with the limited availability and incoherency of data challenge the reliability considerations to be among the primary design criteria of electronic devices. In this article, an iterative machine learning framework is designed to predict the useful lifetime of the solder joint using a set of self-healing data that reinforce the machine learning predictive model with thermal loading specifications, material properties, and geometry of the solder joint. The self-healing dataset is iteratively injected through a correlation-driven neural network (CDNN) to fulfill the data diversity. Outcomes... 

Secure operation of protective intelligent electronic devices (IEDs) has been recognized as a crucial issue for power grids. By gaining access to substation IEDs, intruders can severely disrupt the operation of protection systems. This paper develops an analytical reliability assessment framework for quantifying the impacts of the hypothesized integrity attacks against protection systems. Petri net models are used to simulate possible intrusion scenarios into substation networks. The cyber network model is constructed from firewall, intrusion prevention system (IPS), and password models, which are three types of defense mechanisms for protecting substation networks. In this paper, two main... 

Condensation of water vapor available in atmospheric air can be considered as a solution for water scarcity problem. In this paper, a comprehensive thermodynamic analysis of water production from humid air using thermoelectric coolers (TECs) is presented. The system consists of a number of thermoelectric coolers, a fan to supply the required air flow circulation, two cold and hot air channels, heat sinks and solar cells for powering the thermoelectric coolers and fan. Effects of various design parameters are investigated and discussed. The proposed design is optimized to get the maximum effectiveness which is defined as the amount of produced water per unit of energy consumption. Sensitivity... 

This paper addresses a low complexity and high efficient cooling system applicable on photovoltaic (PV) system leading to enhance electrical efficiency and provide preheated water. The developed system consists of a photovoltaic panel, a cooling water system establishing a uniform surface temperature, and a solar water heater. According to the proposed system characteristics, the setup is constructed based on a single mono-crystalline solar panel to absorb more solar radiation intensity and generate more electrical energy per area in compare to a poly-crystalline panel. The preheated water produced by absorbed heat from the photovoltaic is conducted to a solar water heater to satisfy... 

In this study, a year-round dynamic simulation of a Combined Cooling, Heating and Power generation (CCHP) system has been performed. The proposed system is composed of an ejector cooling system, an Organic Rankine Cycle (ORC), a solar collector field, heat exchangers and hot and cold storage tanks. It is considered that, a portion of the system input energy is provided by a solar collector field and an auxiliary heater supplies the extra required energy. The dynamic simulation of the introduced CCHP system is performed. The developed model is used to evaluate a year-round performance of the system for a residential building located in Tehran. The obtained results indicated that the proposed... 

Desiccant-based evaporative cooling systems are considered as an energy efficient alternative to conventional vapor compression systems in humid climates. A novel hybrid desiccant-based ejector cooling (hybrid DEC) system is here presented to utilize low grade heat. In order to evaluate the system performance under subtropical humid climates, a dynamic hourly simulation of the system is performed for a typical building in Sydney. The results indicate that the hybrid DEC system is able to provide comfort conditions in subtropical and humid climates. Hybrid DEC system has a significant higher coefficient of performance compared to the conventional vapor compression system resulting to 84%... 

This paper addresses a low complexity and high efficient cooling system applicable on photovoltaic (PV) system leading to enhance electrical efficiency and provide preheated water. The developed system consists of a photovoltaic panel, a cooling water system establishing a uniform surface temperature, and a solar water heater. According to the proposed system characteristics, the setup is constructed based on a single mono-crystalline solar panel to absorb more solar radiation intensity and generate more electrical energy per area in compare to a poly-crystalline panel. The preheated water produced by absorbed heat from the photovoltaic is conducted to a solar water heater to satisfy... 

Extraction of thermal heat from a salinity-gradient solar pond (SGSP) as a way of accumulating solar energy, stockpiling and taking merit of it for medium and low temperature demands is presented as an interesting topic in recent decades. This reliable supply of heat can be used for low-temperature refrigeration systems to yield cooling load for residential applications. For this purpose, theoretical investigation of ejector refrigeration cycle (ERC) driven by a SGSP is carried out to produce cooling output. Also, thermoelectric generator (TEG) is used as a potential device replacing condenser of the ERC for the sake of bolstering performance of the fundamental system by producing power,... 

Although evaporative coolers consume much lower electricity than the vapor compression systems, they are not applicable in humid climates. Combination of desiccant wheels and evaporative coolers, known as desiccant-based evaporative cooling systems, allows evaporative coolers to be used in humid climates, which provide significant energy and environmental advantages with respect to vapor compression systems. However, one of the main disadvantages of evaporative cooling is the high water. Regarding the global water crisis, a cooling system which saves both water and energy will be an attractive alternative to the current cooling systems. To this aim, this paper presents a novel...