Sharif Digital Repository

Steel bracing systems can be used effectively for seismic retrofitting of existing RC buildings as well as for seismic design of new building. Steel bracing system has been used to increase the lateral load resistance of steel structures. In recent years the concept of steel bracing has also been applied to the retrofitting of reinforced concrete frames, especially to improve seismic performance of non-ductile reinforced concrete buildings. The use of steel bracing systems for seismic rehabilitation of RC frames offers some advantages such as (a) minimal added weight to the structure; (b) ease and speed of construction;(c) increased architectural flexibility; in comparison with RC shear... 

Poor maintenance of concrete bridges in the past years in Iran, caused serious damages, so most of them need rehabilitation. The majority of repaired members are exposed to repeated damage because compatibility of repair material to substrate concrete not considered as well as weather and loading conditions. This study attempts to improve the repair achievement and durability of concrete bridges. This investigation contains two phases: preliminary study and experimental phase. Preliminary study attends to detect different types of damages of concrete bridges and their causes along with their propagation. The next part of this study discusses about various types of repair materials. In... 

In this thesis, LEON Processor was chosen for its compatible architecture that can be implemented on a wide range of FPGAs. The final designed processor is aimed to conquer soft and hard errors that occur due to cosmic radiations in SRAM cells of an FPGA. The system can finally resist all single SEUs that happen in flip flops and all 4 random errors that take place in each register of the register file. All the flip flops and latches are protected using a TMR scheme. The information redundancy in the regiester file to overcome all 4 random errors is 168% and the errors are corrected by means of a mechanesim that is masked from the processor core. In cache memory, each 32 bit data is... 

Structural elements are exposed to different types of loading which may cause excessive deformations during their life cycle. These deflections may cause damage to the structure .Therefore; reduction of dynamic response of structures can be achieved by exploiting active control system.
In this research, the dynamic behavior of prestressed Eulthemer Bernollli concrete beam under moving Load, support excitation and multi support excitation, controlled by active tendon is studied.The control algorithm employed in this thesis is closed loop linear classical optimal control with displacement-velocity feedback. R and Q matrices are chosen in order to balance the source energy consumption and... 

Statistical studies indicate the fact that in Iran, like many other developing countries, a significant percentage of buildings are made of traditional materials and most of them are adobe buildings especially in rural areas. Furthermore, geological data indicates that Iran is located in alps-Himalayas seismic zone and exposed by destructive earthquakes and adobe buildings suffer the most damages comparing with other type of the structures. According to these explanations, this research deals with adobe buildings behavior and provides solutions for reinforcing them and improving the seismic response of these buildings. These studies include numerical modeling with finite elements methods by... 

This study investigates the cyclic experimental behavior of damaged exterior reinforced concrete beam–column joint specimens retrofitted with the proposed technique using steel elements called steel prop and curb. The technique is usable for local and global strengthening of reinforced concrete frames. Four half-scale RC joints were tested under the cyclic loading; two control specimens with the different beam heights were loaded up to their ultimate strength and this was followed by retrofitting of these damaged specimens as new specimens and tested again under the same loading system. This study indicate the importance of some parameters such as friction , jacket place , thickness of plate... 

With the rapid development of the communication technology, the demand for secure data transferring is inevitable. In this regard, all of secure systems such as Sim-Cards, Smart Cards, to name but a few, enjoy crypto hardware in order to encrypt data. The palpitating heart of these apparatuses, that is, processor, is based on well-known cryptographic algorithms such as AES, RSA, etc. In short, the security depends on the hidden key and in e. g., AES-128 bit, time to disclose the key is in order of 2128. Therefore, no computer can disclosure it in that this period is approximately equivalent to 1032 years in case of the processing computer runs on a 1GHz clock frequency, and a try-out of a... 

Even though a considerable amount of research has been conducted on composite wall system during past years, very limited research has been reported on shear walls strengthened by steel plates. In 2008, the composite shear wall, which consisted of reinforced concrete wall, retrofitted by steel plates, attached to both sides of RC walls using mechanical connectors in form of shear studs, bolts or lateral ties tested under axial load and lateral force. In this research, seismic behavior of RC shear walls strengthened by vertical strips of steel plates is going to be studied. The result will be compared with RC shear wall which fully covered by steel plates. The behavior of RC shear wall will... 

Even though a considerable amount of research has been conducted on composite wall system during past years, very limited research has been reported on shear walls strengthened by steel plates. In 2008, the composite shear wall, which consisted of reinforced concrete wall, retrofitted by steel plates, attached to both sides of RC walls using mechanical connectors in form of shear studs, bolts or lateral ties tested under axial load and lateral force. In this research, seismic behavior of RC shear walls strengthened by diagonal strips of steel plates is going to be studied. The result will be compared with RC shear wall which fully covered by steel plates.The behavior of RC shear wall will be... 

in the present situation most of the bioproducts are supplied at the global markets. hence newcomers and also existing suppliers should study the economic and social trends to make strategic decisions in order to enter new markets. analysis of the effect of different parameters on the market entrance strategy is the main focus of this thesis. the pivotal subject of this thesis is the analysis of Enzyme industry value chain in Iran and the role of each actor and their interactions with each other. after visualizing the Enzyme industry value chain, we want to answer this question: what are the main obstacles for entering the Enzyme industry due to the interactions between the industry... 

The aim of this project was to upgrade and reduce viscosity of heavy oils by adsorbing of asphaltene on Ni-Mo/CB and converting it into lighter and more valuable gas and liquid compounds. Asphaltene has been extracted from a heavy crude oil sample of Soroush oil field in Iran. After adsorption, Asphaltene conversion to lighter components (gas/liquid) was studied through hydrocracking process. To prepare the support of catalyst, Carbon Black, initially a thermal treatment step under the argon gas atmosphere followed by acid-washing process was performed. Afterward, the catalysts was prepared through dry impregnation method. In order to activate catalyst for hydrocracking, the catalysts has... 

The purpose of this thesis is to investigate and identify the performance of a class D gas turbine and improve its efficiency.This thesis contains three parts: first part is to choose a specific engine in class D, for our case “Centaur 40”, then this engine, model and validate by GASTURB with existed data.Second part is tosurvey methods of pgradedemonstrated gas turbine with regard to upgraded Solar Centaur 40 “Taurus 60” using the FORTRAN code base on Stage Stacking method.Finally,the last part of this thesis is to investigate Compressor-Turbine matching. In this part the matching zone of the original and upgraded gas turbines are determined and effect of upgrading on matching zone is... 

In recent years, utilization of hybrid attached and suspended growth system for modification of conventional activated sludge systems has attracted a lot of attentions. Nowadays, with development of urban areas and also introducing new emerging contaminants and as a result an increase in the influent loading of wastewater treatment facilities, the importance of upgrading and retrofitting available facilities have been highlighted. Conversion of Sequencing Batch Reactors to Sequencing Batch Biofilm Reactors is a viable solution for overcoming these problems. Eventhough several researches have been conducted on removal of different contaminants through these systems, the information about the... 

In recent years, in order to investigate the structural performance in seismic zones, concrete column reinforcement and observing their behavior under cyclic loading have attracted considerable attentions. The ductility and energy absorption capability of structure play an important role in structural performance against earthquake and consequently its failure patterns. A new chapter of these investigations has begun by the reinforcement of the concrete members, a major part of which is concerned with the confinement of concrete members in order to increase their ductility and energy absorption against the forces induced by earthquake. In this study, three prominent methods of concrete... 

Seismic behavior of multi-story frames widely has been studied in recently. So that such studies can lead the earthquakes-resistance system to better performance. The dramatic growth of computer processing power make it possible that nonlinear dynamic analysis of structures with great precision could be done. One of the advantages of nonlinear analysis is achieve behavioral performance of structures during an earthquake. Knowledge of the performance, enables us to identify structural weaknesses result in devising to improve these. The aim of this study is to evaluate the seismic performance of reinforced concrete frames have been improved, using different techniques. The frames are designed... 

A total of four reinforced concrete slabs with dimension of 2200×1000×100 mm strengthened with different layers of GFRP sheets were fabricated and tested. A loading of the slabs was performed using displacement control approach.In addition, nonlinear finite element analysis (NLFEA) using ANSYS package was used to simulate the behavior of the test specimens. After reasonable validation of NLFEA with the experimental test results of companion slabs, NLFEA was expanded to provide a parametric study of sixty two slabs. Forty two numbers of these sixty two slabs were without any opening and were modeled for different type of concrete strength, ratio of length/wide for slabs, type of FRP, number...