Sharif Digital Repository

Curcumin incorporated polyurethanes (CPU) are gaining much attention as a biomaterial. However, challenges are still remained due to hydrophobicity and low mechanical strength of CPU. Herein, we synthesized the CPU/ZnO nanocomposites with good mechanical and improved hydrophilic properties via in-situ polymerization. A series of curcumin incorporated polyurethane with different concentrations of ZnO nanoparticles (ZnCPU) are synthesized by using the curcumin, polyethylene glycol (PEG) as the soft segment, hexamethylene diisocyanate (HDI) as the hard segment, and 1,4-butanediol (BDO) as the chain extender. The addition of ZnO nanoparticles (NPs) facilitated the soft domain of PU which is... 

Overexpression of proteins/antigens and other gene-related sequences in the bodies could lead to significant mutations and refractory diseases. Detection and identification of assorted trace concentrations of such proteins/antigens and/or gene-related sequences remain challenging, affecting different pathogens and making viruses stronger. Correspondingly, coronavirus (SARS-CoV-2) mutations/alterations and spread could lead to overexpression of ssDNA and the related antigens in the population and brisk activity in gene-editing technologies in the treatment/detection may lead to the presence of pCRISPR in the blood. Therefore, the detection and evaluation of their trace concentrations are of... 

Here we report on the development of a hybrid nanofibrous scaffold made from polyvinylidene fluoride (PVDF) nanofibers embedding zinc oxide nanorods (ZnOns), and poly(ε-caprolactone) (PCL) nanofibers incorporating dexamethasone (DEX)-loaded chitosan nanoparticles using dual-electrospinning method. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and tensile analysis were carried out for physiochemical characterization of the scaffolds, followed by DEX release profile. In addition, an MTT assay was conducted to assess the viability of mouse bone marrow-derived mesenchymal stem cells (mBMSCs) on the hybrid nanofibrous scaffold.... 

The fabrication of supported noble metal nanocrystals (NCs) with well-controlled morphologies have been attracted considerable interests due to their merits in a wide variety of applications. Photodeposition is a facile and effective method to load metals over semiconductors in a simple slurry reactor under irradiation. By optimizing the photodeposition process, the size, chemical states, and the geometrical distribution of metal NCs have been successfully tuned. However, metal NCs with well-controlled shapes through the photodeposition process have not been reported until now. Here, we report our important advances in the controlled photodeposition process to load regular noble metal NCs.... 

Introduction: Fabrication of fully optimized tissue-engineered materials in order to simulating the natural structure, and enhancing the biological properties of damaged tissue is one of the major challenges in biomedical engineering and regeneration medicine. Although polymeric based membranes have revealed noticeable advancements in bone regeneration, their mechanical stiffens, electrical conductivity and bioactivity need to be tolerated. Methods: Therefore, the present study is designed to generate a multifunctional biomaterial based on polylactic acid (PLA)/ polycaprolactone (PCL)/hydroxyapatite (HA) nanocomposite containing zinc oxide (ZnO) and Graphene (Gr) nanoparticles employing... 

In this work, a green synthesis method was designed and practiced to develop bioactive and biocompatible carbon-based nanocomposites biomaterials. ZnO nanoparticles were synthesized in assistance of leaf extracts and added to a composite nanostructure composed of the reduced graphene oxide (rGO) and multi-walled carbon nanotubes (MWCNT). The resulting green nanocomposite revealed ability to make π-π interactions, hydrogen bonding, and van der Waals interactions with the doxorubicin (DOX). Then, the surface morphology of the synthesized nanocomposite was investigated, and the interrelationship between the surface morphology, relative cell viability, and drug uptake and release behavior were... 

Viral diseases have long been among the biggest challenges for healthcare systems around the world. The recent Coronavirus Disease 2019 (COVID-19) pandemic is an example of how complicated the situation can get if we are not prepared to combat a viral outbreak in time, which brings up the need for quick and affordable biosensing platforms and vast knowledge of potential antiviral effects and drug/gene delivery opportunities. The same challenges have also existed for nonviral immunogenic disorders. Nanomedicine is considered a novel candidate for effectively overcoming these worldwide challenges. Among the versatile nanomaterials commonly used in biomedical applications, graphene has recently... 

The current study describes design and synthesis of silica-coated zinc oxide nanoparticles containing Ponceau 4R food colorant (named as ZnO@SiO2@APTMS/P4R). The interactions of Ponceau 4R and ZnO@SiO2@APTMS/P4R with calf thymus-DNA were investigated It should be noted that the competitive binding experiment revealed that both Ponceau 4R and ZnO@SiO2@APTMS/P4R could release Hoechst 33258. As inferred from the results the binding of the Ponceau 4R and ZnO@SiO2@APTMS/P4R with DNA were surface binding, mainly due to groove binding. Furthermore, antibacterial properties of ZnO, Ponceau 4R and ZnO@SiO2@APTMS/P4R samples against gram-positive bacteria and gram-negative bacteria were examined and... 

A Zn-Rich (GaN)1−x(ZnO)xnanostructure was synthesized with the assistance of a high-gravity technique in order to reduce the reaction time and temperature. The synthesized inorganic nanomaterial has been applied in both drug and gene delivery systems, and as the first fully inorganic nanomaterial, it was investigated in a comprehensive cellular investigation as well. In order to increase the potential bioavailability, as well as the interactions with the pCRISPR, the nanomaterial was enriched with additional Zn ions. The nanomaterial and the final nanocarrier were characterized at each step before and after any biological analysisviaFESEM, AFM, TEM, FTIR and XRD. The polymer coated... 

The present work aims to fabricate cordierite/BZBS glass (Bi2O3-ZnO-B2O3-SiO2) composites through one-step heat treatment. Cordierite was synthesized from a solid-state reaction of aluminum hydroxide, magnesium hydroxide, and silica gel. BZBS glass was obtained through the classic melt quenching technique. Milled cordierite powder was mixed with different volume fractions of glass powders and heat treated at 950 °C. Considering the densification behavior along with the microwave dielectric features, two composites (C70G30 and C60G40) were chosen for further examination. These composites were separately heat treated at different temperatures from 650 up to 900 °C, then characterized due to... 

Stability of Cassie-Baxter (CB) state is very critical in application of superhydrophobic surfaces. The most industrial applications of superhydrophobic surfaces are limited by the transition from the CB state to Wenzel (W) state. In this research, CB state stability of branched hierarchical ZnO nanowires (BH-ZnO NWs) was investigated as compared with ZnO nanowires (ZnO NWs) by using theoretical and experimental approaches. For this purpose, surface of the BH-ZnO NWs and ZnO NWs were modified by thin layers of methyltrimethoxysilane (MTMS). The MTMS thickness was optimized by varying NH4F (0, 5, 10, 20 μL) as used catalyst. The highest water contact angle (WCA) was measured at about 153 ± 3°... 

In this study, both CuO nanoparticles and ZnO nanorods were anchored on thermally-exfoliated g-C3N4 nanosheets (denoted as CZ@T-GCN) via isoelectric point-mediated annealing process as a novel nano-photocatalyst towards degradation of amoxicillin (AMOX). The features of prepared materials were characterized using BET, UV–vis DRS, XRD, FT-IR, XPS, FE-SEM, TEM, EIS and transient photocurrent techniques. These analyses demonstrated the successful formation of heterojunctions between components of CZ@T-GCN nanocomposite, which reflected in significantly increased electron-hole separation and enhanced degradation of AMOX as compared with pure substances. The investigation of influential operative... 

Semiconductor-based photocatalysis is an efficient approach for degradation of organic pollutants. In this context, ZnO/g-C3N4 composite nanofibers containing carbonaceous species with different concentrations of g-C3N4 nanosheets (x = 0.25, 0.5, 1, 2, 10 wt%) noted as ZnO/carbon/(x wt%) g-C3N4 are prepared by electrospinning technique. For preparation of the composite nanofibers, bulk g-C3N4 is exfoliated to nanosheets, and then it is mixed with polyvinyl alcohol and appropriate zinc acetate content followed by electrospinning process. Thermal annealing of the as spun zinc acetate/poly(vinyl alcohol)/g-C3N4 nanosheets sample under N2 atmosphere leads to the formation of carbonaceous species... 

In this work, a facile ionic liquid-mediated method was utilized to fabricate an efficient photocatalyst for environmental remediation. The eco-friendly aspect of the treatment was explored through an in-vivo toxicity bioassay. ZnO particles, prepared by a combined solid state-pyrolysis method, were coated by 1-methyl-3-(oxiran-2ylmethyl)-1H-imidazolium-3-chloride ([MOYI]Cl) ionic liquid. Then, Ag/AgCl species were grown on the surface to make a heterojunction system leading to efficient charge separation and light absorption extension to the visible domain. The products were characterized by XRD, FTIR, SEM, EDX, DRS, BET, and PL analysis. Photocatalytic performance of the nanostructures was... 

Carbon-based nanocarriers such as multiwall carbon nanotubes (MWCNTs) and reduced graphene oxide (rGO) have shown promising delivery capabilities due to their low immunogenicity, superior internalization, and suitable cell penetration efficiency. Herein, a molecular engineering strategy is advanced for the one-pot synthesized rGO/MWCNT/Fe3O4/ZnO to enhance the stability of the nanocarrier in the biological matrix; green synthesized ZnO was responsible for water uptake and reduced cytotoxicity, while Fe3O4controlled the cellular internalization for gene delivery. Surface morphology of the ensuing nanocomposite was correlated with photocatalytic and gene delivery (CRISPR/Cas9) features. For... 

Hybrid bioactive inorganic-organic carbon-based nanocomposites of reduced graphene oxide (rGO) nanosheets enlarged with multi-walled carbon nanotubes (MWCNTs) were decorated to provide a suitable space forin situgrowth of CoNi2S4and green-synthesized ZnO nanoparticles. The ensuing nanocarrier supplied π-π interactions between the DOX drug and a stabilizing agent derived from leaf extracts on the surface of ZnO nanoparticles and hydrogen bonds; gene delivery of (p)CRISPR was also facilitated by chitosan and alginate renewable macromolecules. Also, these polymers can inhibit the potential interactions between the inorganic parts and cellular membranes to reduce the potential cytotoxicity.... 

With significant advancements in research technologies, and an increasing global population, microfluidic and nanofluidic systems (such as point-of-care, lab-on-a-chip, organ-on-a-chip, etc) have started to revolutionize medicine. Devices that combine micron and nanotechnologies have increased sensitivity, precision and versatility for numerous medical applications. However, while there has been extensive research on microfluidic and nanofluidic systems, very few have experienced wide-spread commercialization which is puzzling and deserves our collective attention. For the above reasons, in this article, we review research advances that combine micro and nanotechnologies to create the next... 

Van der Waals (vdW) heterostructures of two-dimensional monolayers are a relatively new class of materials with highly tunable band alignment, bandgap energy, and bandgap transition type. In this study, we performed density functional theory calculations to investigate how a vdW heterostructure of heptazine-based graphitic carbon nitride (hg-C3N4) and graphitic zinc oxide (g-ZnO) monolayers is formed (hg-C3N4/g-ZnO). This heterostructure is a potential solar-driven photocatalyst for the water-splitting reaction. Upon the formation of the heterostructure, a type-I indirect bandgap (Eg = 2.08 eV) is created with appropriate conduction band minimum and valence band maximum levels relative to... 

A novel method of oxide semiconductor nanoparticle synthesis is proposed based on high-voltage, high-current electrical switching discharge (HVHC-ESD). Through a subsecond discharge in the HVHC-ESD method, we successfully synthesized zinc oxide (ZnO) nanorods. Crystallography and optical and electrical analyses approve the high crystal-quality and outstanding optoelectronic characteristics of our synthesized ZnO. The HVHC-ESD method enables the synthesis of ZnO nanorods with ultraviolet (UV) and visible emissions. To demonstrate the effectiveness of our prepared materials, we also fabricated two UV photodetectors based on the ZnO nanorods synthesized using the subsecond HVHC-ESD method. The... 

Covalently functionalized carbon nanoplatelets and non-covalent functionalized metal oxides nanoparticles (surfactant-treated) have been used to synthesize water-based nanofluids in this paper. To prove nanofluid stability, ultraviolet–visible (UV–vis) spectroscopy is used, and the results show that nanofluid is stable for sixty days for carbon and thirty days for metal oxides. The thermophysical properties are evaluated experimentally and validated with theoretical models. Thermal conductivities of f-GNPs, SiO2, and ZnO nanofluids are enhanced by 25.68%, 11.49%, and 15.42%, respectively. Lu-Li and Bruggeman's thermal conductivity models are correctly matched with the experimental data....