Sharif Digital Repository

In this thesis, first, random lasing in a three dimensional disordered medium has been simulated using FDTD method and some properties of random lasers which were observed by others in the previous experiments have theoretically been shown. Our simulation results show that when the density of particles increases to an upper limit, the intensity of lasing modes is enhanced. Also, the effects of pumping rate and particle size on the number of lasing modes and their intensity are studied. Lasing threshold of laser modes in different disordered systems is calculated and it is shown that by an appropriate selection of the central frequency of gain line-shape, the output power intensity of random... 

The purpose of this project is to construct a gas sensor based on one-dimensional nanostructured electrodes of copper oxide. By creating of these nanostructures, can be reduced breakdown voltage of gases, including flammable, to a few hundred volts. The CuO nanowires were grown by thermal oxidation on copper substrate to form self-assembled. In this method, by heating the copper foil,Cu2O also was formed on substrate. Effects of surface tension of substrate and oxidation temperature on surface density and structure of the nanowires were studied. SEM images taken from the samples showed that the surface tensions increases the density of nanowires and increasing the oxidation temperature leads... 

Zinc oxide thin films due to special specification and properties have variable application in different industries. Recently because of wide application of zinc oxide doped SiO2 in optoelectronics and sensors, lots of investigation have been focus on it. Meanwhile due to the SiO2 hydrophilic properties, doping of ZnO with SiO2 can improve self-cleaning properties zinc oxide membrane.It this project zinc oxide and ZnO doped SiO2 thin films with different composition were made by sol-gel and dip-coating process used for coating of mentioned sol over the quartz surface(15*25 mm). At first point different sol with different components was mixed with each other to make composite films but due to... 

The present work is based on the, synthesis and investigation of photocatalytic activity of TiO2, TiO2/MWCNT, ZnO and ZnO/MWCNT nanostructures. The nanostructures were prepared using multi-walled carbonnanotubes (MWCNT) as templates.The SEM images of TiO2 and ZnO nanoparticles and TiO2/MWCNT andZnO/MWCNT showed that nanosize TiO2 and ZnO particles homogeneously and densely supported on the surfaces of multiwall carbon nanotubes the photocatalytic activity of the TiO2, TiO2 /MWCNT, ZnO and ZnO/MWCNT was examined by the degradation of Basic Blue 41(BB41) under UV and Vis lights. The optimum conditions for degradation of BB41 on TiO2 where found to be: calcination temperature (450 °C), dye... 

In this research, the synthesis of the electrospum nano fiber doped zinc oxide and its photocatalyst usage was investigated. The band gap of the zinc oxide in the area of UV leads to deactivation of this material at the visible light. With due the attention to sunny weather in Iran and the fact that about 50 percentage of sunlight is visible light, producing and usage of catalyst materials actived at visible light is economical. Doping is one of the ways of activating ZnO at visible light, so in this research thiourea is used as the source of ZnO doping. The results of the expriments done at visible light and also spectrums of DRS, XPS and XRD prove that the doping is happened. Also, in this... 

In the present work, one dimensional ZnO nanostructures were grown by seed-assisted hydrothermal method. Hydrothermal processing parameters were controlled to obtain ZnO nanorods with diameter lower than 120 nm. The products were characterized by FE-SEM, EDAX, XRD, PL, and ATR-FTIR analyses. ZnO nanoparticles were also synthesized via a simple solvothermal method and their photo peropeties were compared with onedimensional nanostructures. Thereafter dye-sensitized solar cells based on TiO2-ZnO double layer nanostructured film were fabricated. It was observed that DSSC efficiency increased with decreasing the thickness of the film. The highest efficiency of 2.41% was obtained  

ZnO nano particles and mordnite zeolite nano particles were prepared by precipitation method and hydrothermal method,respectively. The influence of solvent and surfactant in ZnO nano particles synthesis were studied to reform the structure of nano particles.These nano particles were based on different supports to improve and enhance their photocatalytic activities. Synthesized catalysts characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform-infra red spectra (FTIR), UV-Vis spectroscopy and BET techniques. To investigated photocatalytic activity of the synthesized catalysts under UV irradiation, they were used to degradation bio-environmental... 

Polycarbonate (PC) and polyethylene-terephthalate (PET) are important engineering thermoplastics. During last decades these polymers and their blends have been studied extensively due to their wide range of applications. Blends of PET and PC combine mechanical properties and chemical resistance together, which make applicable in various components such as automotive, electrical and of medical parts. It has been accepted that PET/PC immiscible blends are subjected to transesterification reactions during thermal processing, which produces PET-PC copolymer chains. In fact, scissioning and substitution of ester/carbonate functional groups of PC and PET at the interface, transforms the initial... 

There are many archeological sites, historic building monuments and inscriptions in Iran and other countries in the world which have been damaged by environmental as well as biological causes. Lichens are one of the biological causes which, through their growth, bring about change and damage to the stones. Different methods, each of which has both advantages and disadvantages, have been used in order to deal with the problem. Since there are many historic buildings in our country which have been damaged by different biological causes including the lichens, doing a research on the topic seems to be quite significant and necessary. The Persepolis is among one of the most important historic... 

Because of the working conditions of semiconductors at ambient temperature and pressure, degradation of organic pollutants through semiconductors photocatalysis has attracted the interest of many researchers. Because of its large exciton binding energy,high chemical and physical stability,high electron and hole mobility, and low cost; zinc oxide, an n-type semiconductor with 3.2 eV direct band gap, is widely used in applications such as photocatalysts, solar cells, and light-emitting diodes. Among various morphologies of ZnO, 1D nanostructures such as nanowires and nanorods have recieved much attention due to their high surface to volume ratio. However, the application of ZnO as a... 

In this study, transparent conductive thin film of Aluminum doped ZnO (ZnO:Al) have been fabricated thorough RF sputtering. The main goal of fabrication of these layers is achieving thin films with minimum resistivity and maximum optical transparency in visible range of spectrum employing as transparent electrodes and buffer layer at the entirely oxidized solar cells. To achieve the suitable structure, various parameters including pressure, power and the thickness of the deposition and annealing on morphologies of thin film has been investigated. According to these results, thin film of ZnO:Al has the transparency of 80% in the visible light range . Doping of ZnO with Aluminum caused... 

Zinc oxide(ZnO) nanoparticles have been used in a wide-ranging of applications such as transparent UV protection, medical treatments, light emitting diodes, sensors and photovoltaic cells. Many applications of ZnO nanoparticles could be improved by changing the particle size, shape and morphology. In order to take advantage of the unique size dependent properties observed for ZnO anoparticles, knowledge of how particle growth can be controlled is required. As an alternative to transmittance electron microscopy (TEM), which is already used in the study of size and monodispersity of ZnO nanoparticles during synthesis, we proposed a simple spectrophotometric method coupled with chemometric... 

ZnO nanopowder has been successfully synthesized by a microwave-assisted solution approach using Zn(CH3CO2)2.2H2O and NaOH. The results obtained from XRD, SEM and TEM show that the mean particle size is 30 nm. SEM and TEM micrographs of ZnO nanopowder also reveal that nanoparticles have spherical shape. A convenient one-pot multi-component reaction of aromatic aldehydes, enolizable ketones or β-keto esters and acetonitrile in the presence of acetyl chloride and 10 mol % ZnO nanoparticles for the synthesis of β-acetamido ketones/esters at room temperature is described. Catalytic activity of ZnO nanopowder for o-acylation of alcohol and phenol has also been investigated. On the other hand,... 

We demonstrated efficient direct electron transfer from the enzyme glucose oxidase to vertically aligned gold nanorods with a diameter of ~160 nm and a length of ~2 μm that are covalently linkage to a 3-dimensional network of reduced graphene oxide nanosheets. The assembly can be prepared by a 2-step electrochemical procedure. This hybrid structure holds the enzyme in a favorable position while retaining its functionality that ultimately provides enhanced performance for enzymatic sensing of glucose without utilizing mediators. The nanorod assembly was applied to the voltammetric detection of glucose. Figures of merit include an electrochemical sensitivity of 12 µA⋅mM-1⋅cm-2 (obtained from... 

The aim of conducting this research is to study, fabrication and photocatalytic application of electrospun ZnO-based composite nanofibers. One of the most important challenges is to apply photocatalyst under solar irradiation and improve its activity for pollutant degradation. ZnO is a wide band gap semiconductor, hence, it is not active under the visible light. In Iran, we have at least 300 sunny days in a year. Therefore, fabrication and application of photocatalytic material with activity under the sunlight which contains 47% of visible light is so vital in our country. Since CuO is a visible light active photocatalyst and its interface with ZnO forms a type I heterojunction, this... 

Due to the increasing number of Advanced Oxidation Processes (AOPs) that are exploited to eliminate emerging and recalcitrant contaminants from water supplies, photocatalytic degradation of Reactive Blue 21 dye using Zinc Oxide nanoparticles is investigated in both a slurry phase and an immobilized photoreactor. The structural and optical properties of the prepared ZnO nanoparticles were examined by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and UV-Visible Diffuse Reflectance Spectroscopy (UV-vis DRS). The effects of photocatalyst concentration, calcination temperature, pH and UV lamps were optimized in the slurry phase photoreactor. It was shown that 250 ppm of ZnO that was... 

The goal of this study is synthesis of nanocoating on basis of ZnO by Sol-Gel method and evaluation of their antibacterial and photocatalyst properties changes by different values of TiO2. For this purpose in both method of synthesis contents of TiO2 hase been changed from 0-25 molar percent. Dip coat method has been used for coating from sol with 1.4 mm/s withdrawal speed and 2 minute immersion time. After each step of coating samples has been dried at 150oC for 10 minute and for increasing thickness this process has been repeated 4 times. In first method zinc acetate dihydrate in 0.1 M final concentration and titanium tetraisopropoxide are sol precursors at in situ way of synthesis. In... 

In this research, two type of graphene quantum dots (GQDs) have synthesized including, normal GQDs and nitrogen-doped GQDs (N-GQDs). Then, each of GQDs were deposited on the 1 dimensional zinc oxide (ZnO) nanostructures namely nanowires (NWs) and branched hierarchical (BH) systems. Then, photocatalytic activity of the samples were studied in photodegradation of methylene blue (MB) and methylene orange (MO) under visible light. First, ZnO nanowires (ZnO NWs) were fabricated by anodization of zinc sheet possessing wurtzite crystal structure with their average length and diameter measured in the range of 50-60 μm and 170-300 nm, respectively. Then, normal GQDs were synthesized by... 

Synthesis, characterization and photocatalytic applications of core-shell like ZnO@CdS nanorods have been studied in this research. The synthesis of core-shell like ZnO@CdS nanorods was carried out in three different steps. At first, ZnO seed layer was formed on glass substrate via sol-gel process under optimum conditions using absolute ethanol solution containing zinc acetate and a stabilizer ( either Monoethanolamine (MEA) or diethanolamine (DEA)). When MEA used as stabilizer, the optimum concentration of sol was found 0.2 M, while increasing the sol concentration caused the seed layer to be grown in a string-like structure. The RMS surface roughness of seed layer prepared by 0.2 M sol... 

Water Gas Shift (WGS) reaction is an old reaction in which syngas is used for producing Hydrogen. At the present time, the major application of this reaction is in fuel cells, since the necessary Hydrogen for these cells is provided by this reaction.
The present study investigate the influence of different preparation methods on properties of Cu-ZnO/Al2O3 catalyst for water gas shift (WGS) reaction, which is now known as the Commercial catalyst for low temperature WGS, and its influence on performance of Cu-ZnO/Al2O3 catalyst to derive an optimal Cu-ZnO/Al2O3 catalyst for water gas shift (WGS) reaction. Cu-ZnO/Al2O3 catalysts was synthesized by CP, DP, DP-Ultra, IWI , CP-Urea, and...