Sharif Digital Repository

Vertically aligned ZnO nanowires (NWs) hybridized with reduced graphene oxide sheets (rGO) were applied in efficient visible light photoinactivation of bacteria. To incorporate graphene oxide (GO) sheets within the NWs two different methods of drop-casting and electrophoretic deposition (EPD) were utilized. The EPD method yielded effective penetration of the positively charged GO sheets into the NWs to form a spider net-like structure, whereas the drop-casting method resulted in only a surface coverage of the GO sheets on top of the NWs. The electrical connection between the EPD-incorporated sheets and the NWs was checked by monitoring the electron transfer from UV-assisted photoexcited ZnO... 

We present fabrication, characterization, and experimental results describing electrical actuation and readout of the mechanical vibratory response of electrospun ZnO nanofibers. For a fiber with an approximate radius of 200 nm and a length of 70 ìm, a resonance frequency around 3.62 MHz with a quality factor (Q) of about 235 in air at ambient conditions is observed. It is shown that the measured frequency of the resonance is consistent with results from finite element simulations. Also, the measurements were performed in an enclosed chamber with controlled levels of ethanol vapor. The adsorption of ethanol causes a shift in the resonance frequency of the fibers, which can be related to the... 

Uniform layers of ZnO nanostructures were formed on quartz and alumina substrates through a simple vapor phase transport (VPT) method without any catalyst or buffer layer by making proper growth conditions. The effect of substrate on morphology, crystalline structure and photoluminescence spectra has been investigated. Scanning electron microscopy images revealed that morphlogical grwoth depends on used substrate, aligned rods with flower-like bundels and entangled rods are vertically aligned rods on the quartz and alumina substrates, respectively. X-ray diffraction studies showed that grown films on the quartz substrates possess stronger c-axis orientation compared to those on the alumina... 

(ZnO)1-x(CdO)x nanofibers were fabricated via electrospinning of polymer precursor by subsequent annealing in air. Field emission scanning electron microscopy (FESEM) showed the smooth and beadless nanofibers and X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed the ZnO hexagonal and the CdO cubic structure. Diffuse reflectance spectroscopy (DRS) showed the band gap energy reduction by increasing the amount of CdO in (ZnO)1-x(CdO)x nanofibers that resulted in the photocatalytic activity under the visible light for dye degradation. Under the UV light CdO acted as both electron and hole sink in the (ZnO) 1-x(CdO)x nanofibers and a possible photocatalytic activity... 

Vertically aligned ZnO@CdS nanorod heterostructure films with various loadings of CdS nanoparticle shell were synthesized and applied in photoinactivation of Escherichia coli bacteria under visible light irradiation. While neither the bare ZnO nanorods (with band-gap energy (Eg) of ∼3.28 eV) under visible light irradiation nor the nanorod heterostructures in dark exhibited any significant antibacterial activity, the ZnO@CdS nanorod heterostructures (with Eg ∼2.5-2.6 eV) could successfully inactivate the bacteria under visible light irradiation. Furthermore, it was found that an optimum loading of the CdS shell (corresponding to the effective thickness less than ∼15 nm) is required to achieve... 

The fabrication of strong photocatalysts applied to the degradation of organic pollutants is necessary in environmental applications. In a single-stage method, acetate precursor and poly vinyl pyrolydine are used to produce ZnO nanostructures with various morphologies in annealing temperatures ranging from 300 °C to 900 oC. The physical properties of the prepared nanostructures were characterized by SEM, XRD and PL spectroscopy. The SEM images exhibit a variety of the as-prepared hexagonal zinc oxides including wires, rods, particles and porous network of welded particles of ZnO nanoparticles. The results of the photocatalytic degradation of methylene blue as an organic dye in aqueous... 

Core/shell structure of ZnO nanowires coated with a monolayer of TiO 2 is investigated using Density Functional Theory (DFT). The electronic states of the semiconductor is calculated and compared before and after coating of the TiO2 monolayer on a ZnO [101 0] surface. The effect of TiO2 coating induce surface states changes and shifts the conduction and valence band edges to higher energies. Our results, in qualitative agreement with the experimental work of Matt Law et al. (J. Phys. Chem. B, 110, 22652), show an increase in open circuit voltage and a decrease in short circuit current in ZnO/TiO2 core shell dye sensitized solar cells. Regarding the semiconductor density of states (DOS), TiO2... 

A novel nanocomposite of ZnO-PbO with flower-like nanostructure was fabricated from zinc acetate and lead nitrate as principle raw materials via an in situ process. The novelty of this study consists in the use of a common approach for fabricating of ZnO and PbO nanoparticles simultaneously. From these experiments the conclusion might be drawn that Zn(NH4) 2 4+ ions and Pb(OH)2 act as precursors for the nucleation and growth of ZnO and PbO respectively under microwave irradiation. The precursors formation were carried at two stages: reaction between zinc ions and lead nitrate with ammonium ion and hydroxide sodium respectively. The average crystalline size of Zno and PbO has been analysed by... 

The corrosion behavior of different grades of commercial aluminum such as AA1040, AA5083, AA6060 and AA7075 in ZnO-containing 4 M NaOH has been determined by using open circuit potential-time measurements (OCP), galvanostatic and potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results of scanning electron microscopy (SEM) and energy dispersive analysis of X-ray (EDAX) reveal that ZnO produces the inhibition effect by the formation of a zinc-containing deposit layer on the surface of aluminum electrodes. Although the influence of zincating on the performance of aluminum alloys and considering the amount of alloying elements such as zinc, magnesium and... 

Novel ZnO-carbon and ZnO nanofibers were fabricated by electrospinning of polymer precursor followed by subsequent annealing in nitrogen and air, respectively. Field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) indicated the smooth and beadless nanofibers with wurtzite crystal structure. X-ray photoelectron spectroscopy (XPS) showed the presence of oxygen vacancies (VO) and chemisorbed O2 on the surface of the samples. Band gap narrowing of the ZnO-carbon nanofibers in comparison to ZnO were measured by diffuse reflectance spectroscopy (DRS). Photo-degradation of azo dye under the UV and visible light was evaluated and ZnO-carbon showed an enhancement in... 

Different aliphatic and aromatic aldehydes such as isobutyraldehyde, ethanal, n-propanal, n-butanal, n-hexanal, n-octanal, and substituted benzaldehydes were cyclotrimerized into their corresponding 2,4,6-trialkyl-1,3, 5-trioxanes in the presence of commercial bulk zinc oxide at room temperature under neat conditions within a short span of time with high yield and excellent selectivity. Liquid products were formed as a separate phase and were decanted easily, whereas solid products were isolated by simple extraction. Effect of different additives, mol % of catalyst, kind of substrate, and reaction temperature were examined on the progress of cyclotrimerization reaction  

NiO-ZnO/TiO2NTs electrodes were synthesized by the electrodeposition of Zn-Ni onto TiO2 nanotubes, dealloying in a concentrated alkaline solution and finally calcination of the resulting Zn(OH)2-Ni(OH)2/TiO2NTs at 300 C. Morphology of the electrodeposited nanostructures was studied using scanning electron microscopy (SEM) while their electrochemical characterizations were carried out using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge procedures. The SEM analysis revealed the nanoporous/cracked structures of the NiO-ZnO/TiO2NTs obtained at the electroplating time of 20 min. The EIS studies showed that nanoporous/cracked structures of... 

We have studied systematically photocatalytic properties of the vertically aligned ZnO@CdS core-shell nanorods where the features were grown through a multistep procedure including sol-gel for the formation of ZnO seed layer, hydrothermal process to grow ZnO nanorods, and successive ion layer adsorption and reaction (SILAR) process to deposit CdS nanoshells onto the ZnO nanorods. Formation of the ZnO seed layer and vertically aligned ZnO nanorods (d ∼ 40 nm) with a hexagonal cross-section was confirmed by AFM and SEM imaging. Successful capping of ZnO nanorods with homogeneous CdS nanocrystallites (∼5 nm) was ascertained by HRTEM diffraction and imaging. Optical properties of the samples... 

Herein, a solution-processed, bottom-up-fabricated, nanowire network electrode is developed. This electrode features a ZnO template which is converted into locally connected, infiltratable, TiO2 nanowires. This new electrode is used to build a depleted bulk heterojunction solar cell employing hybrid-passivated colloidal quantum dots. The new electrode allows the application of a thicker, and thus more light-absorbing, colloidal quantum dot active layer, from which charge extraction of an efficiency comparable to that obtained from a thinner, planar device could be obtained  

A uniformly distributed ZnO nanowire array has been grown on silicon (100) substrates by catalyst-free chemical vapor transport and condensation. The effect of growth conditions including source heating temperature, substrate temperature, and gas flow rate on growth properties of ZnO nanowire arrays are studied. Scanning electron microscopy, X-ray diffraction, and room temperature photoluminescence are employed to study the structural features and optical properties of the samples. The results show a correlation among experimental growth parameters. There is a zone for substrate temperature, by controlling gas flow rate, that uniformly distributed and well aligned ZnO nanowire arrays can be... 

The cauliflower like ZnO nanostructures are grown on ZnO nanorods using spray pyrolysis method. First, ZnO nanorod arrays are grown on p-type silicon substrate without catalyst by chemical vapor transport and condensation method in a horizontal tube furnace. Afterwards, the cauliflower like ZnO nanostructures is deposited on top of the ZnO nanorod array. The PL spectra of cauliflower like ZnO nanostructures consist of UV emission bands around 387 nm and a visible emission at ∼440 nm. The current-voltage (I-V) measurement under dark and UV illumination condition are performed to study photodetection of the cauliflower like ZnO-ZnO nanorod/p-Si heterostructure. The experimental data of dark... 

The morphological characteristics as well the optical properties of Ca-doped BiFeO3 films grown by pulsed-laser deposition technique have been investigated. AFM images revealed that calcium has a radical effect on the surface features of BiFeO3 films. By utilizing spectrophotometer, transmission behaviour of the films was investigated. Local IV characteristics of the films disclosed about three orders of magnitude enhancement concerning electrical conductivity through Ca doping. X-ray photoelectron spectroscopy results revealed that Ca can reduce the valence state of iron in the compound  

An eco-friendly, simple, and effective protocol is developed for the synthesis of various multisubstituted 2-aminothiophenes. In the presence of a catalytic amount of ZnO (5 mol), ketones or aldehydes, malononitrile and elemental sulfur were converted to the corresponding 2-aminothiophene derivatives in moderate to high yields (27%-70%) under solvent-free conditions at 100 °C. Zinc oxide as an efficient, readily available, and reusable catalyst, showed very good catalytic activity for the synthesis of 2-aminothiophene derivatives. Thus far, little research has been reported on the Gewald reaction under solvent-free conditions; to the best of our knowledge, this is the first time that it has... 

Multi wall carbon nanotube (MWCNT) doped ZnO nanofibers were fabricated by electrospinning for the first time. We have successfully demonstrated the photocatalytic activity of doped nanofibers under visible light. Scanning electron microscopy showed that the diameter of MWCNT-doped ZnO nanofibers varied from 120 to 300 nm without agglomeration of MWCNT. Fourier transform infrared spectroscopy and X-ray diffraction studies proved the formation of ZnO bond and wurtzite structure with smaller crystal size in doped nanofibers. Raman spectra demonstrated slight shift in bond position after nanofiber doping, indicating the chemical bond between MWCNT and ZnO. X-ray photoelectron spectroscopy... 

Here, the UV photodetection of ZnO rods grown on porous silicon substrates are reported. Laterally interconnected ZnO rods have been synthesized by chemical vapor transport and condensation method on porous silicon substrates. As characterized by current-voltage measurements the I-V characteristics have linear behavior, indicating space charge effect. The device exhibits photocurrent response of 0.027 A/W for 325 nm UV light under -5 V bias. The rise and decay time constants under these conditions are 19 and 62 s, respectively