Sharif Digital Repository

In the present study, the process of recycling spent lithium batteries by co-precipitation method has been investigated. The process of regeneration of lithium batteries by co-deposition method consists of four stages. In the first stage, the cathodic material is separated from the aluminum foil using NMP solution, and then the cathodic material is heat treated at a temperature of 700 degrees. In the second stage, using sulfuric acid and hydrogen peroxide, the cathode material is leached at 60 ° C, pulp density 55 g / l, time 100 minutes, sulfuric acid concentration 3.25 M and volume percentage of hydrogen peroxide. 10% More than 99% of lithium, nickel, cobalt and manganese are leached. In... 

In this study, Lithium recovery process from lithium-ion battery was investigated by electrodialysis method. First, the cathode of the battery was leached in NMP to separate cathode from aluminum foil. Then, the cathode was leached in sulfuric acid with concentration 3.25 M and 10 volume percent hydrogen peroxide that pulp density was 55 g/L at 60°C for 100 minutes. in the next step, an electrodialysis cell was designed and created to recover lithium. And the influence of time, voltage, flow rate of feed solution, concentration of electrode solution and concentration of feed solution on process was investigated. Purpose of this project were investigated lithium ion recovery rate, lithium... 

Zinc oxide thin films due to special specification and properties have variable application in different industries. Recently because of wide application of zinc oxide doped SiO2 in optoelectronics and sensors, lots of investigation have been focus on it. Meanwhile due to the SiO2 hydrophilic properties, doping of ZnO with SiO2 can improve self-cleaning properties zinc oxide membrane.It this project zinc oxide and ZnO doped SiO2 thin films with different composition were made by sol-gel and dip-coating process used for coating of mentioned sol over the quartz surface(15*25 mm). At first point different sol with different components was mixed with each other to make composite films but due to... 

One of the basic resources for lithium extraction is brine which is very abundance in Iran. It is important to characterize these brines and their compositions to select a suitable method for lithium recovery from them. By investigation of the local brines and determining lithium and other alkali metals composition in them, the ion exchange process using titanium dioxide ion-sieve with nanotube morphology is suggested as highly effective method for lithium extraction from Iranian brines. Due to high advantages of hydrothermal process, TiO2 nanotubes were produced by this method and the optimum parameters of hydrothermal reactions were reported. In this way, hydrogen titanate nanotubes with... 

The present work describes sensing application of modified TiO2 nanotubes towards detection of dopamine. The TiO2 nanotubes electrode was prepared using anodizing method at different conditions, among which NaF/ NaHSO4 solution and voltage of 15 V was chosen as the optimum condition. In order to improve the performance, surface modification with metal nanoparticles (Pd, Pt and Au) and carbon is required using “pulse electrodeposition” and “decomposition of polyethylene glycol at 600 °C” respectively. Carbon was deposited by decomposition of polyethylene glycol in a tube furnace to improve the conductivity. In this regard two type of electrodes were proposed: Pd-Pt-Au-TiO2 and C-Ni(Pt)-TiO2.... 

Titanium dioxide, due to its specific semiconductive properties, has been a highly investigated material for a variety of applications including gas sensors, hydrogen generation by water photoelectrolysis, photocatalysis, dye-sensitized solar cells and purification of water and air. Several recent studies have indicated that titania nanotubes have improved properties compared to any other form of titania for mentioned application. Titania nanotubes have been produced by a variety of methods including deposition into a template and hydrothermal processes. Anodic oxidation of titanium foil in a fluoride-based solution is one of the best methods to produce of titania nanotube arrays. Highly... 

In this work, polyvinylidene difluoride (PVDF) as a ferroelectric polymer, polyaniline (PANI) and polypyrrole (PPy) as conductive polymer additives are used to fabricate high performance mesoporous CH3NH3PbI3-xClx mixed-halide perovskite solar cells in a sequential deposition method. Using polymer additives in perovskite precursor solution leads to modification of perovskite layer morphology by changing nucleation and growth of perovskite grains. Besides, conductive polymer additives in perovskite layer help to more charge carrier transfer. Power conversion efficiency has been enhanced from 10.40 % to 16.51% and to 13.21 % in ambient atmosphere in the presence of 1.0 wt. % of PVDF and PPy... 

Today a significant portion of the world magnesia supply is produced by approximately 20 manufacturers by precipitation of magnesium hydroxide either from seawater or brine sources, which amounts to about 14% of the world magnesia production. The first synthetic magnesia production occurred along the French coast of the Mediterranean Sea, near Aiques-Mortes, operating sometime before 1885. Magnesium hydroxide was precipitated from seawater by reacting it with milk of lime in a continuous fashion using three sequential agitated reactors. Because of the abundance of brine resources enrich in Magnesium in our country, in this project, was tried to precipitate Magnesium Hydroxide from brine... 

In the present project, in order to be self-sufficient and optimal use of boron mines in Iran, a study entitled “The effect of process variables on the production of boric acid” has been conducted, This project has two main objectives: the first objective is the production of boric acid from boron sources and mines in Iran and the second objective is to analyze the effect of variables such as temperature, time, acid concentration, solid to liquid ratio and particle size on the purity of boric acid produced. And finally achieve the optimal conditions for the production of boric acid.In this study, boric acid was made from leaching hydrobracite (magnesium-calcium ore with boron) with sulfuric... 

The Fe-Ni-Co alloy to borosilicate glass seals have been used for many years as hermetic and electrically insulating seals. It is not only excellent in thermal expansion matching but also in good wettability and bond strength too. Oxidation of Kovar was performed in Water vapor, Saturated Nitrogen and N2-H2-H2O atmosphere in tube furnace. Oxide layer composition and thickness changed by varying in oxidation temperature and time. XRD analysis showed different Iron oxides in oxide layer, FeO, Fe3O4 and Fe2O3. However in the third atmosphere no Hematite observed. Increasing oxidation temperature and time result in increasing sample weight gains and roughness. Oxide layer microstructure also was... 

Formation of nanoparticles by the gas phase condensation process is one of the most promising methods for the nanoparticles synthesis. Finding the correlations between adjustable parameters of the process and nanoparticles properties depends on how parameters affect the mechanism of nucleation and growth. The use of classical nucleation theory at nanoscale leads to unacceptable results; hence, approaches such as molecular dynamic simulation (MD) have been proposed to investigate the mechanism of nucleation and growth at atomic scale. In the present work, the formation of iron clusters from a supersaturated gas phase was investigated via molecular dynamics simulation. For thermalization of... 

In recent years, many efforts have been made in the field of drug delivery with hydrogel nanoparticles. This class of materials has been at the center of attention in medical science due to their improved physical and biological properties including high amount of water preservation, penetration, bio capampatibility and physical structure similar to outside matrices of tissue. Among various applications in medical sciences, drug delivery based on hydrogels is very attractive. Hydrogels can protect drugs from aggressive environmental factors such as pH and thermal changes, and presence of enzymes. The porosity of hydrogels facilitates drug loading into the gel matrix and provides a... 

This investigation presents synthesis and characterization of pure and monophasic hydroxyapatite (Ca10(PO4)6(OH)2; HA) Nanostructures prepared by coral and oyster shell powders heated at 800 oC for 8 h as precursor via precipitation method. The morphology of HA nanostructures was controlled in the presence of various surfactants such as SDS, CTAB and PVP. The HA Nanorods synthesized by SDS were applied to fabricate bone scaffolds. Particle sizes of the HA Nanoparticles were about 20-30 nm. Pours three-dimensional HA/Ge/CMC scaffolds cross-linked by citric and oxalic acids were synthesized. In order to increase the pore size of the scaffolds, NaCl with medium (180-250 µm) and large (420-500... 

Combustion synthesis is the best and most effective method for producing ceramic nano-composites which is also a simple and economic way of producing very fine powders with high purity. In this method, a series of combustion reactions named aqueous combustion analysis are used for producing single-phase and nano-composite products ,in which the heat produced in reactions are used for completing the phase . several chemical substances such as glycine ,urea ,ammonium acetate and others are used as combustion agents. In order to obtain optimized nano fuel, we produced alumina powder with multiple combustion percentages and composition of 25%moli ammonium acetate (AA) with 75%moli urea was... 

Dye-Sensitized solar cells are the third generation of solar cells that have the potential to increase efficiency as much as solar cells of previous generations, along with lower prices. The cathode electrode of the pigmented solar cell as one of the essential components of the cell plays the role of accelerating the oxidation reaction reduction of the electrolyte. Platinum often is used as a catalyst layer. To reduce production costs and maintain cell viability, platinum should replace with other materials at a lower cost and higher electrochemical activity. Recently, carbon materials have been considered for the production of inexpensive solar cells with suitable performance. Among... 

As one of the most important agglomeration methods, pelletizing has a very important place in the iron and steel production chain. In the present study, the feasibility of improving FeO index in the final product of Pellet Factory No.1 of GolEGohar Mining and Industrial Company was investigated. The remaining FeO in the iron oxide pellet represents the amount of Magnetite that was not oxidized during the pelletizing process. The remaining FeO in the primary Magnetite is a disturbing structure for the direct reduction process and will cause a decrease in the compressive strength of the pellet (CCS) and as a result it will be crushed. Therefore, the percentage of the remaining FeO in the... 

Using a Lithium Selective Ion Sieve is one of the most advanced processes for Extraction of lithium from Brines. The ability to Extract Lithium selectively from brines make the ion sieve suitable for brines with low concentrations of lithium. In this study brines samples from Urmia Lake with lithium concentration of 30 ppm was used. The main objective of this study was to find the best condition for lithium adsorption and desorption using the synthesized titanium dioxide ion sieve. In this study lithium selective ion sieve with nanotube morphology and Diameter of 81 nm was synthesized. Study on pH of synthesized solution containing lithium ions was carried out and pH=12 was concluded the... 

Due to the technology advancement and the large-scale application of lithium-ion batteries in recent years, the market demand for lithium is growing rapidly and the availability of land lithium resources is decreasing significantly. As such, the focus of lithium extraction technologies has shifted to water lithium resources. Among various aqueous recovery technologies, the lithium ion-sieve (LIS) technology is considered the most promising one. This is because LISs are excellent adsorbents with high lithium uptake capacity, superior lithium selectivity, and good cycle performance. TiO2-based nanotubes are an appropriate option for adsorbing lithium from solution due to their high specific...