Sharif Digital Repository

A novel method based on microextraction in packed syringe (MEPS), as a sample preparation technique in combination with gas chromatography-mass spectrometry (GC-MS) was developed using a polypyrrole (PPy) nanowires network as the extracting medium. The PPy nanowires network was prepared using a soft template technique and its characterization was studied by scanning electron microscopy (SEM). The use of micelles in this methodology has an important role in the shape of the growing polymer. The pyrrole monomer was introduced into cetyltrimethylammonium bromide (CTAB) micelles and this has led to the formation of nanowires with diameters ranging from 30 to 60 nm. The bulk PPy prepared without... 

Through a fast, simple, low cost, surfactant-free and convenient microwave-assisted route, narcis-like ZnO nanostructures (10-15 nm size) with flower diameters in the range of 1-2.5 μm were synthesized. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy and room temperature photoluminescence (PL) measurements were used to characterize the produced ZnO nanostructures. The principle raw materials - ammonium hydroxide (NH4OH) and zinc acetate dihydrate [Zn(CH3COO)2·2H2O] - were both inexpensive. The method was fast, simple and surfactant-free capable of producing larger quantities of zinc oxide... 

We present in situ whole-field measurements of the temperature field using laser-induced fluorescence in a study of bottom-chilled uni-directional solidification of aqueous ammonium chloride. We utilize a two-color, two-dye, ratiometric approach to address the significant spatial and temporal variations of laser sheet intensity field due to refractive index variations caused by the evolving concentration and temperature fields. In our work we take advantage of two temperature sensitive fluorescent dyes with opposite temperature sensitivities in order to increase the overall sensitivity and temperature resolution of the measurements. The resulting temperature sensitivity (about 4% K-1) is... 

In the present work, synthesis and swellability of acrylatedstarch-based hydrogels was investigated. Acrylic groups were introduced onto starch backbone by a homogeneous synthesis to produce starch monomers with three different degree of substitution (DS). The radical copolymerization of acrylatedstarch (AST) with acrylic acid (AA) and acrylamide (AAm) was carried out in aqueous solution using ammonium persulfate (APS) as an initiator. Infrared spectroscopy (FT-IR) and TGA thermal analysis were carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was examined by scanning electron microscopy (SEM). Their equilibrium swelling degree was evaluated... 

Partial purification of plant peroxidase from turnip (Brassica rapa) was optimized. Aqueous two phase system and precipitation by ammonium sulfate (as two parallel purification methods) were used. Polyethylene glycol/ammonium sulfate/NaCl (25:7:3%, w/v) system followed by gel-filtration chromatography gave a purification factor of about 36 fold. On the other hand, ammonium sulfate precipitation (60-80% deg) followed by gel filtration gave only about 13 purification fold. Hence, the aqueous two-phase system was more efficient and useful method as a primary purification step since it was less laborious, less time-consuming, and led to more purification factor. The partially purified turnip... 

Novel polyampholytic superabsorbing nanocomposites based on the zwitterionic sulfobetaine monomer [3-(methacrylamido)propyl)]dimethyl(3- sulfopropyl)ammonium hydroxide were synthesized through in situ polymerization in aqueous solution with different contents of an organo-modified clay (OMMT, Cloisite 30B). Structural and thermomechanical properties of hydrogels were characterized by FT-IR, XRD, and DMTA, respectively. Swollen gel strength of hydrogels was determined by a rheological method. Storage modulus of the hydrogels was considerably improved in comparison with its the clay-free counterpart. The nanocomposite hydrogel containing 15% OMMT possessed the highest gel strength. The glass... 

In this article, a new group contribution model is suggested for obtaining the thermodynamic properties of biomolecules in aqueous solutions. Accordingly, a Freed-FV model has been applied for the combinatorial free-volume term. The activity coefficients, solubilities, densities, and vapor pressures of amino acids and simple peptides in aqueous solutions were correlated, using the proposed group contribution model. Group interaction parameters of the proposed model were obtained by use of experimental data from amino acids available in the literature. The results demonstrate that the group contribution model can accurately correlate activity coefficient, solubility, density, and vapor... 

A mild and practically-convenient one-pot procedure for the direct Mannich reaction has been developed using a condensation of amines, aldehydes and unmodified ketones under solvent free conditions in the presence of Znl 2 with good to excellent yields. The present methodology offers several advantages, such as excellent yields, simple procedures, short reaction times and milder conditions with very small amounts of catalyst. Furthermore, it is the first time that the catalytic activity of several catalysts under solvent free conditions has been studied. It was found that both the diastereoselectivity and the rate of reaction were improved with various Lewis acids and metal oxides. However,... 

Graft copolymerization of methyl methacrylate (MMA) was carried out on bagasse fibers in an aqueous medium using eerie ammonium nitrate (CAN) as initiator under a neutral atmosphere. In order to obtain the optimum condition for graft copolymerization, the effects of initiator concentration, temperature, time of reaction, and monomer concentration were studied. The maximum grafting percent was found to be 122%. The bagasse grafted poly(methyl methacrylate) was characterized by FTIR and its thermal behavior was characterized by TGA. Copyright © 2008 WILEY-VCH Verlag GmbH & Co. KGaA  

The interaction of n-dodecyl trimethylammonium bromide (DTAB) with oxyhemoglobin A and oxyhemoglobin S is investigated using UV-visible absorption spectra and chemometric resolution techniques. Oxyhemoglobins (A and S) induced to partial oxidized form (ferrihemoglobin) by DTAB and finally transform to fully oxidized hemichrome. Hemichrome mole fractions of HbS are more than HbA because of more hydrophobic interaction of DTAB-HbS in second set of binding site relative to DTAB-HbA. The visible spectra between 500 and 650 nm are used for identifying the present components in solution because each species of hemoglobin has a specific spectrum in this region. The number of components and mole... 

The properties of metallic nanorods vary due to changes in their composition, size and shape, which all depend on the aspect ratio of the nanorods. This work focuses on the optimization of the aspect ratio of silver nanorods using response surface methodology (RSM). Seed-mediated approach, which is the newest method with less difficulty, has been used for the synthesis of silver nanorods. First, silver ions were reduced with sodium borohydride in the presence of sodium citrate dehydrate, as stabilizer. Then, the prepared seeds were added to a solution containing more metal salts, a weak reducing agent (ascorbic acid) and a rod-like micellar template (cetyltrimethylammonium bromide, CTAB).... 

Mass-transfer rates to and from drops in liquid-liquid extraction processes are often reduced by the presence of contaminants. To design an industrial extractor, it is essential to consider this contamination effect in a quantitative manner. To achieve this goal, an experimental investigation was conducted on the mass transfer into single drops for n-butanol-succinic acid-water, as the recommended test system by the European Federation of Chemical Engineering (EFCE). The effects of anionic (sodium dodecyl sulfate, SDS), cationic (dodecyl trimethyl ammonium chloride, DTMAC), and nonionic (octylphenol decaethylene glycol ether, Triton X-100) surfactants on the hydrodynamic and mass-transfer... 

A series of superabsorbent composites were synthesized through graft copolymerization of acrylic acid (AA) onto carboxymethyl cellulose (CMC) in the presence of celite powder using N,N'-methylenebisacrylamide (MBA) as a cross-linking agent and ammonium persulphate (APS) as an initiator. The chemical structure and thermal properties of the composite hydrogels were characterized by FTIR spectroscopy and TGA methods, respectively. Morphology of the samples was examined by scanning electron microscopy (SEM). In free-state, the swelling conditions and hence the related data are not real, because in all their applications the swelling particles of superabsorbent must absorb aqueous solutions while... 

In the present study, the electrodeposition of Fe, Pd and Fe-Pd alloys, in alkaline solutions, has been investigated. Using ammonium hydroxide and trisodium citrate as the complexing agents, it has been shown that the co-deposition of Fe and Pd is achieved due to diminishing the difference between the reduction potentials of these two metals. Cyclic voltammetry results clearly show that the electrodeposition processes are diffusion-controlled and the diffusion coefficients of Fe2+ and Pd2+ are 1.11 × 10-6 and 2.19 × 10-5 cm2 s -1, respectively. The step potential experiments reveal that nucleation mechanism is instantaneous with a typical three-dimensional (3D) growth. At low overpotentials,... 

In industrial liquid-liquid extraction processes, the feed is not clean liquid but there are various kinds of contaminants in the feed entering the extractors. In this regard, a two-impinging-jets contacting device (TIJCD) was tested through the standard test system recommended by the European Federation of Chemical Engineering (EFCE), namely toluene-acetone-water, in the presence and absence of various types of surface-active agents (SAAs). The influences of anionic, cationic, and nonionic SAAs such as sodium dodecyl sulfate (SDS), dodecyl trimethyl ammonium chloride (DTMAC), and octylphenol decaethylene glycol ether (Triton X-100), respectively, on the extraction efficiency and overall... 

Hydroxyapatite (HAp) nanorods with uniform morphology and controllable size were successfully synthesized by precipitating Ca(NO3) 24H2O and (NH4)2HPO4 in the presence of cetyltrimethylammonium bromide (CTAB) and polyethylene glycol 400 (PEG 400) as cationic surfactant and non-ionic cosurfactant, respectively, under hydrothermal conditions. The effect of hydrothermal temperature on the composition, morphology and size of HAp particles was studied using X-ray diffraction (XRD), Fourier transform infrared spectrometry (FTIR) and scanning electron microscopy (SEM). Results revealed that the morphology and size of HAp particles can be effectively controlled by the presence of CTAB and PEG... 

A series of biopolymer-based superabsorbent hydrogels based on carboxymethyl cellulose has been prepared by free-radical graft copolymerization of acrylamide and 2-acrylamido-2-methylpropan sulfonic acid (AMPS) in aqueous solution using methylenebisacrylamide as a crosslinking agent and ammonium persulfate as an initiator. The effect of variables on the swelling capacity such as: acrylamide/AMPS weight ratio, reaction temperature, and concentration of the initiator and crosslinker were systematically optimized. The results indicated that with increasing the amount of AMPS, the swelling capacity is increased. FT-IR spectroscopy and scanning electron microscope analysis were used to confirm... 

Hydroxyapatite nanorods aligned with ultrahigh crystallinity and high-yield were successfully synthesized through a hydrothermal approach. In this experiment, a new composition of cetyltrimethylammonium bromide ((CH 3(CH2)15N+(CH3) 3Br-) was designated as CTAP)/Ca(NO3) 2/ (NH4)2HPO4/NaOH and distilled water under hydrothermal condition, to synthesize single crystal HAp nanorods with diameter of 20 ± 10 nm and length of 80 ± 20 nm, was introduced. Crystal phases were determined by X-ray diffraction (XRD). Scanning electron microscope (SEM) was applied to investigate the morphology. The microstructure of the HAp products were further observed by transmission electron microscope (TEM) and high... 

In this work, a novel method to synthesis of an acrylic superabsorbent hydrogel was reported. In the two stage hydrogel synthesis, first copolymerization reaction of acrylonitrile (AN) and acrylamide (AM) monomers using ammonium persulfate (APS) as a free radical initiator was performed. In the second stage, the resulted copolymer was hydrolyzed to produce carboxamide and carboxylate groups followed by in situ crosslinking of the polyacrylonitrile chains. The results from FTIR spectroscopy and the dark red-yellow color change show that the copolymerization, alkaline hydrolysis and crosslinking reactions have been do take place. Scanning electron microscopy (SEM) verifies that the synthesized... 

Molybdenum oxide nanostructures were synthesized utilizing the solution combustion method where the ammonium molybdate powder and an organic additive were used as precursors. Different organic additives including ethylene diamine tetraacetic acid (EDTA), polyethylene glycol 200 (PEG 200), sorbitol and urea were used as surfactants in order to investigate the effect of additive structure on morphology and particle size of products. Also various reaction parameters such as the additive/Mo molar ratio, concentration of metal ion in solution, pH of the reaction, and temperature of the synthesis media were changed to study effects on product morphology and size. Outcomes were characterized by...