Sharif Digital Repository

Anodic aluminium oxide films were fabricated by well known two-step anodizing process in oxalic acid electrolyte. The ordering characteristics (ordered pore domains, average pore diameter size and through-pore arrangement) of anodic aluminium oxide films, obtained in different growth sequences, were identified by microscopic analysis such as ex situ contact-mode atomic force microcopy and scanning electron microscopy. Flattened areas in which some pits are seen mostly cover the electropolished surface of aluminium. Single anodizing of aluminium produces a broad distribution of nanopore size, whereas induces a highly ordered hemispherical pattern, which plays the ordered nucleation sites for... 

A pseudocapacitive electrode based on mesoporous manganese dioxide (MnO2) was fabricated via the anodic pulse electrodeposition method. Pulse current (PC) has many parameters that affect the physicochemical and electrochemical properties of the material. PC parameters are generally divided into independent and dependent types. Independent pulse parameters consist of the time of applying current (ton), interval time with zero current (toff), and peak current density (Ip). Dependent pulse parameters include duty cycle (θ), frequency (f), and average current density (Ia). In this work, the changes of two independent parameters (ton and toff) at the constant Ip = 2 mA cm-2 on the anodic pulse... 

Solid oxide fuel cells (SOFCs) introduce a promising electrochemical conversion technology to generate electricity directly from fuel oxidization. A three-dimensional (3D) numerical model is proposed to evaluate the SOFC performance by employing computational fluid dynamics (CFD) approach based on the finite element method. This research includes simultaneously solving momentum, energy, and mass transport equations linked with the electrochemical reactions. First, the modeling results of a SOFC system with a rectangular channel in the absence of obstacles are compared with the experimental data, showing very good agreement. The effects of different shapes and numbers of obstacles on fuel... 

This study reports the successful fabrication of high-performance flexible binder-free lithium-ion battery anode and supercapacitor based on the synthesis of 3D hierarchical MnO2 nanoflakes (NFs) on vertically aligned carbon nanotubes (VACNTs) grown upon stainless steel (SS). The experimental results revealed that the prepared electrodes were well served as supercapacitors with a tremendous specific capacitance of MnO2 NFs VACNT/SS 1131 F/g at 0.25 A/g in 0.5 mol.L−1 Na2SO4, 518.8% more than VACNT/SS (218 F/g). Compared to other MnO2 NFs/CNT composites, as-fabricated binder-free MnO2 NFs/VACNTs electrode achieves outstanding performance with high initial discharge and charge capacities of... 

This study reports the successful fabrication of high-performance flexible binder-free lithium-ion battery anode and supercapacitor based on the synthesis of 3D hierarchical MnO2 nanoflakes (NFs) on vertically aligned carbon nanotubes (VACNTs) grown upon stainless steel (SS). The experimental results revealed that the prepared electrodes were well served as supercapacitors with a tremendous specific capacitance of MnO2 NFs VACNT/SS 1131 F/g at 0.25 A/g in 0.5 mol.L−1 Na2SO4, 518.8% more than VACNT/SS (218 F/g). Compared to other MnO2 NFs/CNT composites, as-fabricated binder-free MnO2 NFs/VACNTs electrode achieves outstanding performance with high initial discharge and charge capacities of... 

Today the need for fault diagnosis in polymer electrolyte membrane fuel cells (PEMFCs) is felt more than ever to increase the useful life and durability of the cell. The present study proposes an indirect in-situ experimental-based algorithm for diagnosing the moisture content issues in a three-cell stack. Three adaptive neuro-fuzzy inference systems (ANFIS) approximate the system outputs (cells voltages, cathodic and anodic pressure drop) in normal conditions. The values of Pearson's correlation coefficients (0.998, 0.983, and 0.995 for outputs, respectively) show the high quality of the modeling. In unknown operating conditions, the residuals of experimental and ANFIS values are compared... 

This manuscript describes the implementation of plasma-enhanced chemical vapor deposition (DC-PECVD) and vapor-liquid-solid (VLS) techniques to fabricate a yolk-shell SnO2@Void@C nanowire (NW) structure. SnO2 nanowires have been synthesized on the stainless steel mesh substrate through the VLS method. The PECVD-assisted growth of carbon nanolayer on the SnO2 and SiO2 coated SnO2 NWs has been performed to fabricate SnO2@C core-shell and SnO2@SiO2@C yolk-shell structures, respectively. A consequent silica etching process converted the SnO2@SiO2@C into SnO2@Void@C structure. The electrochemical performance of bare SnO2 NWs, SnO2 NWs @ C, and SnO2 @Void @ C coaxial NWs structures have been... 

Copper anode (∼98%) is widely used to produce the cathode (99.995 wt%) in electrorefining process. These anodes sometimes become problematic from the production line due to the presence of bumps/holes on their surface. To find the reason of this defect, chemical composition of the three casted anodes was determined by the quantmeter analysis. Also, the microscopic and phase analysis were done by FESEM, EDS, XRD, and XRF for three types of anodes bump. The chemical analysis of anodes confirmed a high level of sulfur and oxygen, which have a key role in the formation of bumps. The results confirmed the presence of impurities including Cu2S, BaSO4, CaCO3 and MgCO3, which cause the formation of... 

Titanium nitride/graphene nanocomposite as an anode material of lithium ion batteries has been fabricated through the reaction of TiCl4 and NaN3 in supercritical benzene medium followed by ammonia treating at 1000 °C for 10 h. The synthesized TiN/G nanocomposite depicts rate-dependent behavior in such a way that it shows specific capacity of 115 mAh g−1 when is cycled at higher rate (1.6 C) while it shows 76 mAh g−1 when is cycled initially at lower rate (0.2 C) and is subsequently subjected to higher rate (1.6 C). Moreover, TiN/G anode demonstrates capacity retention of 112%, 100%, and 70% after 250 cycles at charge/discharge rates of 1.6, 0.7, and 0.2 C, respectively. This unusual behavior... 

In this research gas sealed Multi-Wire Proportional Counter (MWPC) including blades between anode wires and beta particles of 90Sr with 196 keV mean energy were considered. Ten different gases such as Noble gases mixtures with methane and several other pure gases were studied. In this type of detector, by using Garfield and Maxwell codes and for each of the gases, variation of different parameters such as first Townsend, electron attachment coefficients with variable electric field and their effects on pulse height or collected charge and in turn on Signal to Noise Ratio (SNR) were studied. Also the effect of anode voltage and its diameter and the pressure of gas on the pulse height were... 

An inverted organic solar cell (IOSC) with nanograting array as anode of the cell has been simulated and analyzed using a combined electrical and optical approach. We have used finite difference time domain (FDTD) method for optimizing device structure. We have compared the characteristics of the IOSC with grating structure with a reference IOSC without grating structure. As a result, an improvement of 11% and 26% in power conversion efficiency (PCE) and short circuit current (JSC) compared to the reference structure was achieved. An analysis is provided on the origin of reduced fill factor (FF) in the IOSC with grating structure. We also have discussed about disadvantage of using optical... 

The nanotubular arrays of titanium dioxide (TiO2 NTs) have recently received considerable interest for fabrication of dental and orthopedic implants. However, their antibacterial activity requires substantial improvement for the potential infections minimization, without compromise of their biocompatibility. In this work, TiO2 NTs were developed on Ti6Al4V substrates via anodization at a constant potential of 60 V for 60 min, followed by heat treatment at 500 °C for 90 min. Physical vapor deposition (PVD) was further employed to decorate silver oxide nanoparticles (Ag2O NPs) on the nanotubular edges. The results indicated that the highly-ordered TiO2 NTs with decorated Ag2O NPs could promote... 

TiO2 nanotube arrays (TNA) have been modified by cobalt phosphate (CoPi) through potentiostatic electrodeposition method. Different samples have been prepared by changing the loaded CoPi through the deposition time from 10 to 960 min. Formed catalytic materials have been characterized by different methods. Although charge transfer resistance of the CoPi/TNA photoanodes have been decreased from 5.5 to 4.0 kΩ by increasing the deposition time from 5 to 60 min, the maximum photoresponse was obtained for 10 min CoPi deposition leading to 24% more photocurrent compare to bare TNA which proposed optimum value for cobalt phosphate decoration. Based on field emission scanning electron microscopy... 

Porous carbon template decorated with mixed transition metals/metal oxides with tunable architecture is becoming increasingly important and attractive as a kind of novel electrode materials. In this way, mixed-metallic metal-organic frameworks (MOFs) provide an opportunity for fabrication of homogeneous mixed metals/metal oxides distribution in the porous carbon frame without any carbon precursor additive. Also, structures, dimensions and electrochemical performance of MOFs can be readily manipulated by simply tuning the metals molar ratio. In this study, we demonstrate the design and fabrication of petal-like NiCo/NiO-CoO metal/metal oxides with a rational composition embedded in 3D... 

Recently, graphitic carbon nitride (g-C3N4) has attracted great interest for photo(electro)chemical applications such as sensing, solar energy exploitation, photocatalysis, and hydrogen generation. This paper presents the potential application and benefits of g-C3N4 nanolayers as a green and highly efficient electrode modifier for the detection of trace lead ions in drinking water and urban dust samples. Carbon nitride nanosheets with a thickness of ∼6 A° and lateral of 100–150 nm were prepared through high-temperature polymerization of melamine followed by sonication-assisted liquid exfoliation. A glassy carbon electrode (GCE) was modified by a thin layer of g-C3N4 through drop casting and... 

In this study, the different parts of carthamus tinctorius plant, including petal (SPE), leaf (SLE), and shoot (SSE), have been extracted. Adsorption of the extracts on mild steel in 3.5 wt. % NaCl solution was evaluated employing electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, and electrochemical noise measurements (EN). The field-emission scanning electron microscopy (FE-SEM) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) were employed to appraise the morphology of the samples surface subjected to the test solutions. According to the EIS results, the maximum adsorption efficiency belonged to the solution containing 1 g L−1 of... 

Amorphous lithium metal alloys (LixM, with M=Si, Ge, Sn, …) are attractive anode materials for lithium-ion batteries owing to their high energy-storage capacity and safety characteristics. However, repeated insertion of lithium often leads to chemo-mechanical degradation of the alloy, which can severely reduce the battery capacity and cycle life. Better understanding of the chemo-mechanical response of lithium alloys is needed to guide the design of damage-resistant anode microstructures. In this work, we propose a constitutive theory that couples large, viscoplastic deformations to the insertion and extraction of lithium in amorphous electrode materials. The theory relies on the concept of... 

Accumulative roll bonded (ARBed) AA1050 and Al-2 vol% SiCp (AMC) samples were anodized in an H2SO4 electrolyte to improve corrosion resistance. The SEM images revealed that the anodic oxide's morphology is significantly dependent on the microstructure of the ARBed bare samples, owing to high internal energy that accelerates Al consumption during anodizing process. Potentiodynamic polarization measurements and EIS evaluation showed that anodic oxide improves the corrosion resistance of both ARBed AA and AMC samples; however, the electrochemical behavior of the processed samples changed due to the formation of a complex oxide structure comprising of twisted pore channels and attack routes. ©... 

In this study, the influence of the sample position (anode) on the incorporation of nano/micro alumina particles on the AZ31B magnesium alloy substrate was investigated by plasma electrolytic oxidation (PEO) coating. For characterized this effect, Scanning electron microscopy (SEM), potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and pin-on-disk test were used to the evolution of the microstructure, corrosion resistance, and the wear behavior of the films. Based on the obtained results, the effect of the anode position from vertical to horizontal is dependent on particle size and it can be influenced only on the incorporation of nanoparticles. The... 

The anode materials are one of the critical components in rechargeable lithium ion batteries (LIBs). The monoclinic tungsten trioxide (mWO3) is introduced as interesting anode electrode for LIBs due to its good structure for intercalation and de-intercalation of lithium ions, high abundance and various oxidation state of tungsten and etc. In this study, we prepare and investigate the effect of various amounts of nickel dopant on characteristics and electrochemical properties of the mWO3 as the anode electrode in a rechargeable LIB. The experimental investigations confirm that the number of nickel atoms has a remarkable effect on controlling spherical particle diameter, crystallite size, and...