Sharif Digital Repository

Li-ion batteries have been widely applied as power sources for portable electronic devices. Recently, Li-ion batteries are considered as the most promising energy storage technology for electric vehicle applications however, fundamental improvements are needed. TiO2 (B) is attractive candidate for anodes in rechargeable Li-ion batteries, due to their low cost, non-toxicity and favorable channel structure for fast lithium mobility. It is predicted that synthesis of doped nanostructure of this material, through reducing the diffusion pathway and formation of crystal defects, will increase the capacity of TiO2(B). In this investigation, Co and V doped TiO2(B) nanowires are synthesized by... 

Titanium dioxide, due to its specific semiconductive properties, has been a highly investigated material for a variety of applications including gas sensors, hydrogen generation by water photoelectrolysis, photocatalysis, dye-sensitized solar cells and purification of water and air. Several recent studies have indicated that titania nanotubes have improved properties compared to any other form of titania for mentioned application. Titania nanotubes have been produced by a variety of methods including deposition into a template and hydrothermal processes. Anodic oxidation of titanium foil in a fluoride-based solution is one of the best methods to produce of titania nanotube arrays. Highly... 

Many of the major structure over coastal waters in the Kish Island due to the aggressive condition are showing signs of reinforcement corrosion. Recent advances in the development of anodes make it practical to use zinc galvanic cathodic protection to protect this structure in this area. Five anode systems were tested on several samples as, (1) zinc metal spray applied by arc-spraying on the concrete, (2) a zinc foil with conductive adhesive backing, (3) a system of zinc mesh and grout jacket, (4) a system of zinc mesh and compression panels, and (5) a bulk zinc. These anodes are set up to comparison the effects of potential and current over the zinc galvanic cathodic protection during 4... 

Among the various materials, silicon anodes have the highest lithium absorption in lithium-ion batteries. But this high lithium absorption capacity can cause 300 percent volume expansion and large stresses. Experimental observations show that charge and discharge cycles may cause plastic deformation in some parts of the electrode particle. On the other hand, there is a possibility of a ratcheting phenomenon due to changing in elastic properties of the electrode material during the charging and discharging processes. However, this phenomenon has not been reported for silicon spherical electrode particles yet.This study aims to model the elastic-plastic behavior of silicon spherical electrode... 

In this research, first thin films with nanostructures of titanium nanotube arrays (TNAs) synthesized by anodization under different applied voltage (20- 60 V) and different reaction times (120 and 200 min). The electrolyte solution for synthesizing the samples contained 90% ethylene glycol (EG), 10% DI water, 0.1 M NHR4RF and a little HR3RPOR4R to reach the pH to 5.6. The synthesized samples crystallized under annealing treatment at 500 °C (with heating rate of 9.5 °CminP -1 P). The scanning electron microscopy (SEM) analysis was indicate that the length and the inner diameter of the nanotubes have increased from 1.6 μm and 67 nm (for 30 V anodization and for 2h) to 4.2 μm and 125 nm (for... 

According to human needs and in line with the development of advanced technologies, different biomedical Engineering fields like hard tissue implants are growing rapidly. Despite significant biotechnology Developments in recent years, some problems to the recognition of implants related osseointegration phenomena persist. The deficient osseointegration and implant-associated infections are key issues for the long-term clinical success of titanium and titanium alloy implants, while development of multifunctional surfaces that can simultaneously overcome these problems remains highly challenging. Therefore, the ultimate goal of this paper was to improve bone cell attachment and simultaneously... 

Today, recycling lithium as a valuable metal from brine plays an important role in various applications such as battery manufacturing, computers, aerospace and automobiles. Among the aqueous methods available for the extraction of the lithium element in brines, ion exchange by TiO2 nanosorbents is one of the most efficient methods. In this study, first the titanium dioxide nanotubes were well synthesized by anodizing method and the nanograss created after the anodizing process were completely eliminated. Then, the effect of three cathodes of aluminum, graphite and stainless steel in order to select the best cathode and achieve a regular morphology as well as their replacement with platinum... 

Although much progress has been made in eliminating, conserving, and reducing migration and emissions of radioactive materials, the risk of radioactive material release into the environment is still one of the most important hazards in the use of nuclear energy. In this study, graphene compounds have been used as adsorbents for the removal of radioactive materials due to their high level, cost-effectiveness and simplicity of the synthesis process of various composites. In this regard, the removal of strontium and cobalt by graphene compounds has been investigated. Magnetite nanoparticles were anchored on the surface of graphene by sol-gel method and adsorption in batch mode was investigated.... 

The usages of Autonomous Underwater Vehicles (AUV) are limited due to the lack of suitable portable energy sources. Researches show that chargeable batteries and fuel cells are the most appropriate energy source for AUVs in near future. The main purpose of thesis is the modeling and obtaining the governing equations for Aluminum/Air batteries containing seawater, the so-called semi fuel cell. The steady state governing equations include Navier-Stocks equations (Hydraulic-Boundary layer), chemical ionic species mass balance at boundary layer velocity field, electrochemical equations in the electrolyte and the electrode surface, equations of motion of the hydrogen bubbles and equations for the... 

In this research we focus on study and fabrication of ordered nanotube arrays of titanium oxide and their applications in photoelectrochemical cell. Nanotubular films of titanium oxide have been fabricated using anodization method. Short-length nanotubes, less than one micrometer, have been synthesized in aqueous electrolyte containing deionized water, hydrofluoric acid and phosphoric acid. To get Micron-length nanotubes, we have employed organic electrolyte containing ethylene glycol, deionized water and fluoride ammonium. After fabrication, the photo-catalytic activity of nanotubular structures was evaluated by measuring the rate of degradation of in methylene blue aqueous solution. The... 

In this study, the performance of Inconel 617 anode as an inert anode in aluminum electrolysis process was studied. To carry out the research, first, an electrolyte was produced using NaF, KF, AlF3 and Al2O3 with a molar ratio of sodium and potassium fluoride to aluminum fluoride of 1.33. Next, aluminum electrolysis cell was made using Inconel 617 anode and cathode and the aforementioned electrolyte. To evaluate the Inconel 617 anode, the performance of the electrolysis cell in different conditions of temperature, anode-cathode distance, and excess potential was investigated in a period of one hour. Using anode mass measurements, cell potential and current density and scanning electron... 

Ice formation upon various surfaces could lead to many industry problems and result in unpleasant accidents. For instance, the formation of ice on wind turbine blades or airplanes/helicopter wings could cause catastrophic disasters. The methods used to address this problem usually require exogenous energy consumption or anti-ice ingredients. The energy or anti-ice ingredients usage has adverse environmental effects and should be replaced with better approaches. One of these approaches is utilizing modified anti-ice surfaces. In this method, by modifying surface features, such as physical asperities and surface energy, the icing time of the surface could be prolonged. These surfaces are... 

In this study, biocompatible ceramic coating, containing hydroxyapatite particles (HA), was successfully created by AC anodizing, on the surface of commercially pure titanium grades 2. Coating process basically consisted of three methods. In Method 1, samples were anodized in a salty electrolyte containing calcium – phosphate base and in method 2 samples were anodized as initial process, following cathodic polarisation deposition of HA particles. Finally in method 3, samples were anodized in an electrolyte containing of HA particles suspension.Parameters such as current density and time of anodizing process, in first procedure, and time of cathodic deposition process in second procedure, and...