Sharif Digital Repository

Increasing use of polymeric materials, especially in the packaging industry, besides the problems that exist in recycling these materials, has become a serious concern for the environment. The synthetic polymers are used widely in packaging industry so they have a considerable role in waste production in packaging industry. One way to solve this problem is adding a natural polymer to the synthetic polymer, as a result it becomes friendly environmentally. Starch is one of these natural polymers which is cheap and has the ability to complete degradation in the environment.using row starch in the polymeric compounds causes a severe drop in compound’s properties. For this reason, row starch must... 

In recent years the rapid rise of polymer consumption especially in the form of packaging materials became a real menace for the environment. Polyolefin are some of the most dominant packaging materials and responsible by part of the problems in the disposal of one-trip packaging. One of the possible ways of solving this problem is the introduction of additives increasing their susceptibility to environmental degradation into non-biodegradable polymers. One such additive is starch- the natural, cheap, and easily biodegradable polymer. Starch was already used as a filler or as a blend with polyolefin. Addition of dry starch granules to polyolefin follows the general trend of filler effects on... 

Magnesium and its alloys have been used as biodegradable implements in recent years. However Magnesium implements may corrode in the body before the natural healing process of the damaged tissue. MAO process was studied in order to reduce primary corrosion of Magnesium alloy in Simulated Body Fluid (SBF). MAO coating was created on AZ31 alloy in a nontoxic alkaline-silicate solution at DC current densities of 5, 10, 15 and 20 mA/cm2 for 30 minutes and the current was in form of 20-10-5 mA/cm2 steps that each were applied for 10 minutes. The maximum corrosion resistance was observed for the mentioned step applied current in a 30g/l Sodium Silicate solution. Furthermore the effects of adding... 

The aim of the present research is to analyse feasibility study of manufacturing the disposable (Biodegradable) plant containers in Iran. The population of the research consists of the whole capacity for manufacturing this product and the similar product producers which have been registered in the Ministry of Industry, Mines and Commerce. First, in this research, the environmental and anti-environmental impacts of non-plant Disposable Containers like: plastic, foam, paper and aluminum have been discussed and also their disadvantages have been examined to be compared with advantages of using plant Disposable Containers. Thereafter, collecting the required data about today society and market,... 

Nerve repair plays a very prominent and significant role among the efforts that have been made to integrate the concepts of tissue engineering in strategies to repair almost all parts of the body. This is partly due to the complexity of the nervous anatomy system and its function as well as the inefficiency of conventional repair methods that are based on a component of biomaterials or cells alone. Studies show that electrical stimulation can enhance the nerve regeneration process; so the use of conducting polymers has attracted much attention for the construction of neural tissue engineering scaffolds. In this study, the electrical properties of neurons and the effects of electrical... 

Recently, due to the increase of environmental concerns, a significant raise in applying films and packaging containers, pollution produced from petroleum-based plastics packaging and problems arising from the various methods of waste disposal, the researchers have concentrate to replace these materials with biodegradable ones. In this study, a nanocomposite based on alloy matrix of thermoplastic starch and polyethylene which is reinforced with different amounts of Montmorillonitenanoclay has been constructed by the extrusion process. Furthermore, in order to increase the compatibility between the polar and non-polar components in the group of samples, compatibilizer was used and its... 

In recent years, magnesium and its alloys have been considered as biodegradable implants, but they corrode in the body before natural process of damaged organs recovery is completed. In this investigation PEO operation was used for corrosion control and effect of different parameter such as number of operation steps, electrolyte type, time and operation voltage on coating properties was studied. Scanning electron microscopy was used for investigating of morphology of coats and to determine chemical composition and phase of coats EDS analysis and X-ray diffraction were used. The corrosion resistance of samples were evaluated by potentiodynamic polarization and electrochemical impedance (EIS)... 

Platelet nanoparticles could dramatically decrease permeability of polymeric film where increase considerably its physical -mechanical properties. Bio based (Biodegradable) polymeric materials such as starch based polymeric films show very weak mechanical and high oxygen and water vapor permeability. Graphene oxide (GO) could increase mechanical properties of starch based polymer where decrease its permeability dramatically. Addition of chitosan also could increase antibacterial and antifungal of films and decrease permeability of films considerably. In this research nanocomposite of Starch/Chitosan/GO films have been prepared by solution method and its morphology, permeability, physical... 

Treatment of critical-size bone defects caused by sport injuries, accidents, trauma, infection, and osteoporosis remains a major clinical challenge. In order to repair or regenerate large bone defects, bioactive three-dimensional scaffolds play a key role due to their multilevel porous structure, high surface area, enhanced mass transport and diffusion. Many studies reported that macropore diameters greater than 500 µm can lead to vascularized bone tissue. In this study, a hierarchically porous composite scaffold was prepared. Hierarchically porous silk fibroin- bioactive glass composite and fibroin scaffold were fabricated with controlled architecture and interconnected structure with... 

TPPB are characterized by a cell-containing aqueous phase, and an immiscible and biocompatible organic phase that partitions toxic/insoluble substrates to the cells base on their metabolic demand and the thermodynamic equilibrium of the system. Surface areas, Mass transfer coefficient, Hydrophobicity of polycyclic aromatic hydrocarbons (PAH) are considered as limitation in two phase partition bioreactors (TPPB). For solving of this challenge, in this project used solid particle for increment of mss transfer and surface area, and also solid particles can eliminate limitation of initial concentration of polycyclic aromatic hydrocarbon and ratio of aqueous/organic phases. Naphthalene is used as... 

Fixation devices and implants are the most applied devices in orthopedic operation and dentistry. Interference screw is one of these devices that is made by biodegradable nanocomposite polymeric materials in this project. The purpose of this project is designing interference screw, applicable to body, and doing related tests since in vivo tests. For this purpose, hand injection molding, was designed to prepare screws in laboratory scale, first. For making samples, poly(D,L) lacticacid, nano hydroxyapatite as reinforce and polyethylene glycol as plasticizer were used. These samples were made by combination of solvent casting and melt processing methods. Adding nano hydroxyapatite and... 

The purpose of the present project is to construct and improve the quality of an absorbable membrane using a supercritical process and study the effects of the operative parameters. Today, usage of biodegradable polymers is intensively increasing and these kinds of polymers are used as drug delivery carrier and tissue engineering medium. A biodegradable membrane is suitable for this goal. In this study Poly Ethylene Glycol (PEG) is used as the biodegradable polymer. Gas anti-solvent (GAS) method was applied for the production of the membrane. The used anti-solvent was Supercritical Carbon Dioxide. In order to study the effects of the operative parameters on the structure of the produced... 

Nowadays, Food generation has gained great importance, not only in economic view but also in political. Food reservation is as important as food generation. Synthetic polymer films has widespread use in packaging industries, that is because of its features like easily forming, low price, lightness, etc. The increase of oil resources prices and severe environmental pollution by synthetic polymers, are notable cases which led researchers to find ways in using bio polymers. Starch is one of the bio polymers which is cheap and totally degradable. Using starch in bio degradable leads to high decrease in the mix features. Nano particles are used to solve the problem.
In this study, the effect...