Sharif Digital Repository

Regioselective epoxides ring opening with aromatic amines using boric acid and glycerol in water as a green media have been investigated. Corresponding β-amino alcohols were obtained with excellent yields and considerable regioselectivity. High yields of the products and mild reaction conditions using green catalyst and water as a green solvent are some advantages of this procedure  

Adaptation of Penicillium simplicissimum with different heavy metals present in a spent hydrocracking catalyst, as well as one-step, two-step, and spent medium bioleaching of the spent catalyst by the adapted fungus, was examined in batch cultures. Adaptation experiments with the single metal ions Ni, Mo, Fe, and W showed that the fungus could tolerate up to 1500. mg/L Ni, 8000. mg/L Mo, 3000. mg/L Fe, and 8000. mg/L W. In the presence of multi-metals, the fungus was able to tolerate up to 300. mg/L Ni, 200. mg/L Mo, 150. mg/L Fe and 2500. mg/L W. A total of 3% (w/v) spent catalyst generally gave the maximum extraction yields in the two-step bioleaching process (100% of W, 100% of Fe, 92.7%... 

The kinetics of bioleaching of Mo, Ni, and Al from spent hydrocracking catalyst, using Aspergillus niger was studied. The four most effective bioleaching variables were selected in accordance with the Plackett-Burman design and were further optimized via central composite design (CCD). The optimal values of the variables for maximum multi-metal bioleaching were as follows: particle size 150-212. μm, sucrose 93.8. g/L, pulp density 3%. w/v, and pH 7. The maximum metal recoveries corresponding to these conditions were 99.5 ± 0.4% Mo, 45.8 ± 1.2% Ni, and 13.9 ± 0.1% Al. The relatively low Ni extraction was attributed to the precipitation of Ni in the presence of oxalic acid. Under the optimal... 

CaO derived from calcined eggshell was doped with Na–K by wet impregnation method and the effect of different Na/K molar ratios was investigated on biodiesel production from canola oil. The catalysts were characterized by X-ray Powder Diffraction (XRD), Brunauer–Emmett–Teller (BET), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), and Thermogravimetric (TGA) analyses. FAME yields were determined by Gas Chromatography-Mass Spectrometry (GC-MS). The Na–K/CaO catalyst with Na/K molar ratio of 1 showed the highest FAME yield of 97.6% at optimum reaction conditions. Structural investigation of materials revealed that FAME yield was proportional to the number of basic sites on... 

In this study, 40% CaO/γ-Al2O3 catalyst was used for biodiesel production from corn oil. A transesterification reaction was done for 5h at a temperature of 65°C in the presence of corn oil, methanol (methanol to oil molar ratio of 12:1), and CaO/γ-Al2O3 catalyst (0.06g/g (6wt%)). Catalyst used in this study was synthesized using the sol-gel method. In this method, two parameters of gelation temperature and nitric acid concentration were used as variables in the catalyst synthesis step, and experiments were designed using central composite design (CCD). The results indicate that the optimal point is achieved at a gelation temperature of 70°C and... 

Kaolin clay material was loaded with potassium carbonate by impregnation method as a novel, effective, and economically heterogeneous catalyst for biodiesel production of sunflower oil via the transesterification reaction. The structural and chemical properties of the produced catalysts were characterized through several analyses including the X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy, and Brunauer–Emmett–Teller specific surface area. These revealed the best catalyst for the investigated reaction among different ones prepared based upon various impregnation extent of the potassium carbonate. The influence of this parameter was examined through a... 

Silica-supported boron trifluoride (BF3·SiO2) is an efficient, readily available and reusable catalyst for the synthesis of 1,2,4,5-tetrasubstituted imidazoles using benzil, an aromatic aldehyde and an amine in the presence of ammonium acetate. This one-pot procedure is very simple, affording good to excellent yields. © 2008 Elsevier Ltd. All rights reserved  

Over 200 million motorcycles in use worldwide account for a substantial portion of global mobile source total hydrocarbons (THC) and carbon monoxide (CO) emissions. In Tehran, capital of Iran, ultrarich inefficient combustion in gasoline-fueled motorcycles results in significantly high CO and THC emissions. Motorcycle catalysts can reduce CO and C3H6(as a representative hydrocarbon) emission factors by 60-80%. In the present work, CO and propylene oxidation over a commercial Pt-Pd-based wiremesh catalyst is studied in a flow reactor setup under simulated conditions relevant to 125 cc four-stroke gasoline carburetor motorcycles. Steady-state individual and co-oxidation tests for CO and... 

A spent processing catalyst from an Iranian oil refinery was initially characterized physically and chemically. Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans were used to mobilize Al, Co, Mo and Ni from the spent catalysts under optimized conditions in batch cultures. The characteristics of the bioleach solution (pH, Eh, cell concentration and Fe(II)/Fe(III) concentration) were determined along with the concentration of metal values extracted from the catalyst. The results showed that after bioleaching using A. ferrooxidans in the presence of ferrous sulfate, maximum extractions of 63% Al, 96% Co, 84% Mo and 99% Ni were achieved after 30 days at pH 1.8-2.0. However, the... 

Nano-sized particles of manganese oxides have been prepared by a very simple and cheap process using a decomposing aqueous solution of manganese nitrate at 100 °C. Scanning electron microscopy, transmission electron microscopy and X-ray diffraction spectrometry have been used to characterize the phase and the morphology of the manganese oxide. The nano-sized manganese oxide shows efficient catalytic activity toward water oxidation and the epoxidation of olefins in the presence of cerium(iv) ammonium nitrate and hydrogen peroxide, respectively  

Methane steam reforming (MSR) is an assuring reaction using steam to produce H2 as clean energy over a nicκel-based catalyst. We synthesized mesoporous monometallic NiMgAl2O4 and bimetallic NiCoMgAl2O4 catalysts in a two-step combustion method using a mix of fuels and powder metallurgy. BET-BJH, XRD, TGA, TPR, FESEM, and EDX-mapping characterized surface area, porosity, morphology, crystalline structure, and metal-support interaction behavior. The products exhibited strong interaction of well-structured MgAl2O4 spinel with NiO, in both specimens. The MSR evaluation tests at 750 °C under atmospheric pressure, CH4:H2O feed ratio of 1:1.2 showed the bimetallic catalyst has the highest... 

The effect of SiO2/Al2O3 ratio on high silica content nano-sized HZSM-5 stability and selectivity in conversion of methanol to propylene (MTP) has been investigated in a continuous flow isotherm fixed-bed reactor. Highly crystalline HZSM-5 zeolite samples with SiO2/Al2O3 ratios ranging 150–200 have been prepared and characterized using XRD, ICP-AES analytical techniques, NH3-TPD, BET surface area and SEM imaging for studying their physical and chemical behavior. The reaction was conducted at 480 °C and 1bar with WHSV = 1 h−1 and a solution with 1:1 wt% of methanol and water as feed. Over thoroughly monitoring the catalyst synthesis conditions, the nanocrystal ZSM-5 zeolite samples were... 

Pectin from two different plant sources: apple and sugar beet was studied. Apple pectin was modified by chemical treatments such as: acid, alkali and ammonia, so as to obtain an ester level equal to or less than 50 %, which is described as low methoxyl (LM) pectin. LM pectin form gels with significant characteristic. In this study, de-esterification of apple pectin with acid treatment resulted in gel specification with higher molecular weight and viscosity. Acid treatment resulted in pectin with average molecular weight of 32000 Dalton. Pectin was extracted from sugar beet pulp by acid and alkali treatments. The quality of gel formation and water uptake was improved using sugar source... 

In this research, cobalt ferrite (CoFe2O4) magnetic nanoparticles as well as MIL-53(Fe) structure were synthesized by the hydrothermal and solvothermal methods, respectively. Moreover, magnetic composites of MIL-53(Fe)/CoFe2O4 nanoparticles with different cobalt ferrite loadings (i.e.; 0.05, 0.1 and 0.2 g) were prepared via the solvothermal method. The main novelty of the present research was to synthesize a magnetic composite of MIL-53(Fe)/CoFe2O4 nanoparticles in order to perform rapid photodegradation of Direct Red 23 (DR23) dye under the LED visible light irradiation. Good magnetic properties of the fabricated composite led to easy separation and rapid retrieval of the catalyst from the... 

Prediction of reaction yield as the most important characteristic process of a slurry polymerization industrial process of propylene has been carried out. Stacked neural network as an effective method for modeling of inherently complex and nonlinear systems-espe-cially a system with a limited number of experimental data points-was chosen for yield prediction. Also, effect of operational parameters on propylene polymerization yield was modeled by the use of this method. The catalyst system was Mg(OEt)2/DIBP/TiCl 4/PTES/AlEt3, where Mg(OEt)2, DIBP (diisobutyl phthalate), TiCl4, PTES (phenyl triethoxy silane), and triethyl aluminum (AlEt3) (TEAl) were employed as support, internal electron... 

A simple and efficient method was developed for fabricating spherical granules of CuO catalyst via a three-step procedure. In the first step, copper oxide nanoparticles were synthesized by hydrothermal decomposition of copper nitrate solution under supercritical condition. Then, they were immobilized in the polymeric matrix of calcium alginate, and followed by high-temperature calcination in an air stream as the third step, in which carbonaceous materials were oxidized, to result in a pebble-type catalyst of high porosity. The produced CuO nanoparticles were characterized by transmission electron microscopy (TEM) that revealed an average size of 5 nm, X-ray diffractometry (XRD), and thermo... 

Palladium nanoparticles immobilized on a cross-linked imidazolium-containing polymer were evaluated as a catalyst for Suzuki carbon-carbon cross-coupling reactions using water as the solvent. The nanocatalysts show good catalytic activities for aryl iodides and aryl bromides and moderate activity with aryl chloride substrates. Coupling of sterically hindered substrates could also be achieved in reasonable yields. The heterogeneous catalyst is stable, can be stored without precautions to exclude air or moisture, and can be easily recycled and reused  

An environmentally benign, highly efficient, and simple protocol for the synthesis of various structurally divergent dithiocarbamate derivatives in one-pot reaction of amines, carbon disulfide, and epoxides, without using any solvent and catalyst at room temperature, is presented. This new procedure has the advantages of higher yield, lower cost, reduced environmental impact, and simple work-up procedure. © Georg Thieme Verlag Stuttgart  

The catalytic activity of potassium salts of phthalimide (PPI) and succinimide (PSI), as organonucleophilic catalysts, has been investigated for the cyclotrimerization of isocyanates under solvent-free conditions. PPI showed better catalytic activity in comparison with PSI. Diverse and challenging isocyanates afforded the respective symmetrical isocyanurates in good to quantitative yields in an atom economic reaction without any phase transfer catalyst. © 2005 Bentham Science Publishers Ltd  

Lithium perchlorate has been found to be an inexpensive and efficient catalyst for the ring opening of epoxides by indole and N-methylindole, which provides an environmentally friendly method for the synthesis of substituted indoles. A complete regioselectivity in favor of nucleophilic attack at the benzylic carbon atom of aromatic epoxides, such as styrene oxide, is observed. However, aliphatic unsymmetrical alkene oxides undergo selective nucleophilic attack at the sterically less-hindered carbon atom. This catalyst offers several advantages, such as short reaction time, high yields, lower catalytic loading, simple experimental procedure, and easy isolation of the products, under...