Sharif Digital Repository

Because of the high operating temperature, interconnect surface tends to be oxidized and Cr2O3 oxide layer will be created on the surface. This phenomenon is undesirable due to decreasing electrical conductivity, so a preservative coating is needed to improve the interconnect properties. In this paper, a dense perovskite thin film was successfully synthesized on a ferritic stainless steel (type 430) substrate by a sol-gel dip coating method. This coating improved chemical stability, oxidation behavior of the substrate and decreased cathode poisoning. The lanthanum chromite was coated on the substrate by sol-gel dip coating process. First, during a hydrolyze process, a stable sol was made up... 

In this thesis a smart anticorrosive pH-responsive coat was developed with layer by layer (LbL) technique in the assembly of SiO2/CTAB/PSS/HMTA/PSS/PEI/PSS. SiO2 nanoparticles were prepared from Matland Company (Iran) with average size of 24 nm. At first, the corrosion inhibition of HMTA for API 5L Grade B steel in 3.5 wt.% NaCl solution was investigated. Tafel polarization technique showed the optimum concentration of HMTA was 0.08 M with 92% corrosion inhibition efficiency as the morphology of coverage and adsorption on the steel surface was confirmed by SEM and EDS. AFM results showed the roughness of the surface decreased from 241 nm to 56 nm that is attributed to HMTA adsorption on the... 

Aseptic loosening and infection are two major problems of bone implants. Aseptic loosening occurs due to poor cell growth and poor adhesion to the implant surface over time. Bone infection at the implant site occurs mainly by the staphylococcus aureus bacteria. In some cases, infection occurs in the short term and in the early times after implantation, and in some cases, infection occurs in later times. The aim of this study is to synthesize and evaluate antibacterial coatings, while having cell growth-promoting components and cell differentiation to solve bone implant problems simultaneously. Also, the issue of bacterial resistance to antibiotics and their risks in bone implants is another... 

In this study TiO2/SiO2 thin films were prepared by sol-gel method from Tetra isopropylortho Titanate(TIPT) as the principle of TiO2 material with Tera ethoxysilane(TEOS) as the principle of SiO2 material to achieve high scratch-resistant , antibacterial and self-cleaning surface area under the effect of various percentage of SiO2 . Film deposition was carried out using a dip-coating technique and heat-treatment was used at 700ºC to achieve crystalline of films with excellent adherence the of substrate.
The surface morphology of the films has been observed by Scanning Electron Microscope (SEM) and the tribological properties of the surface were investigated by Atomic Force Microscope... 

Zirconia toughened alumina (ZTA) Nanocomposites were prepared using nano sized Zirconia (ZrO2) powders doped with 3% mol of yttria (Y2O3) nanopowders and the sintering behavior at different temperature (1450 °C, 1550 °C and 1650 °C) were studied. The ZTA composite with different amount of partially stabilized Zirconia (PSZ)(5, 10, 15 and 20% mol) were prepared via axial pressing and then sintered to achieve maximum densification. After that phase changes of the samples were monitored. SEM was used for microstructural study and hardness and fracture toughness were determined by means of Vickers indentation. X-ray diffraction pattern showed that at constant composition, tetragonal zirconia... 

Because of the high operating temperature, interconnect surface tends to be oxidized and Cr2O3 oxide layer will be created on the surface. This phenomenon is undesirable due to decreasing electrical conductivity, so a preservative coating is needed to improve the interconnect properties. In this paper, a dense spinel thin film was successfully synthesized on a ferritic stainless steel (type 430) substrate by a sol-gel dip coating method. This coating improved chemical stability, oxidation behavior of the substrate and decreased cathode poisoning. The Nickel-Cobalt spinel was coated on the substrate by sol-gel coating process. First, during a hydrolyze process, a stable sol was made up from... 

In this study, antistatic waterborne polyurethane coating containing zirconia nanoparticles is made and applied on 304 stainless steel substrates at weight percentage of 0.66, 1.3, 3, 4.5 and 6% zirconia nanoparticles. For synthesis of hydrophilic isocyanate prepolymer, isocyanate prepolymer is modified by hydrophilic polyethylene glycol with molecular weight 600, 1000 and 4000. For ensuring of modification condition and stability of hydrophilic isocyanate prepolymer in aqua solution, FTIR and stability tests are employed, respectively. In order to create antistatic properties of these coatings, semi - conductive zirconia nanoparticles are used. To improve the distribution of zirconia... 

Nitinol alloy is important and increasingly used in medicine and industry due to its unique properties such as shape memory and superelasticity. Plasma Electrolytic Oxidation (PEO) is a relatively new method which in electrical discharge occurrence and formation of small plasma arcs on the anode surface and the electrochemical and thermochemical reactions in plasma environment prepare ceramic coating on the substrate. This method is taken into consideration because of its simplicity and effectiveness in the preparation of oxide ceramic coatings with porous structure on the surface of certain metals and alloys to improve their corrosion and wear properties. In this study, to improve the... 

Nowadays, proper design and retrofitting of structures against natural and manmade disasters, is among the main concerns of researchers and designers in order to reduce financial and human costs. Extensive research has been carried out on the structures resistance against earthquake up to now. Although, the vast amount of research has resulted various regulations and guidelines, there is still a long way ahead to achieve the desirable results. Due to high sensitivity of the steel to temperature variations, fire exposure is more destructive for steel structures compared with the concrete ones. The performance of an intermediate three-storey steel moment frame with 4 spans was studied in this... 

Tungsten Inert Gas (TIG) process and different cored wires that were filled separately with nano TiC particles, micro TiC particles and graphite powders were employed to produce surface composite coating on CP-Ti substrate to improve wear resistance. At first using titanium strips, wire drawing process and different powders various cored wires were produced and then using TIG, these cored wires were coated on CP-Ti. This process was done for different current intensities and velocities. Composite coating tracks were found to be affected by the TIG heat input and the kinds of the cored wires. The microstructures of the surface composite coating showed phases of α'-Ti and primary and dendritic... 

In this research, immobilization method was employed to increase the thermal stability of Chondroitinase ABC I (cABC I) enzyme. In first step, magnetite nanoparticle (Fe3O4) was selected as a support and cABC I enzyme was attached via the adsorption method. The results showed that pH=6.5, temperature 15 ˚C, enzyme-to-support mass ratio 0.75, and incubation time 4.5 hr were the appropriate conditions for immobilizing cABC I enzyme on Fe3O4 nanoparticle. It was also found that the optimum pH for free and immobilized enzymes was 7.6 and 8.0, respectively. The maximum activity of free enzyme was obtained at 25 ˚C, whereas the activity of immobilized enzyme was almost constant in the temperature... 

In this paper, a finite element formulation is presented to study the thermoelastic behavior of Functionally Graded (FG) axisymmetric coating in shell structures. The power law distribution model is assumed for the composition of the constituent materials in thickness direction. The Plasma Spray with multi steps coating method is considered for coating method. The procedure adopted to derive the finite element formulation contains the analytical through-the-thickness integration inherently. So the explicit through-the-thickness integration becomes possible after defining a two-noded, three parameters degenerated axisymmetric FG element. The nonlinear heat transfer equation is used for... 

The present work has been planned to elaborately investigate the key parameters which affect the formation of shrinkage porosities during centrifugal casting of ductile cast iron pipes. The porosity defects can be mostly found in the Hot Mould centrifugal casting products and adversely affect the final mechanical properties of ductile iron pipes namely Ultimate Tensile Strength and Elongation.
In the first point of view, the created defects were detected through microstructural observations and the corresponding responsible mechanisms were also discussed. The results showed that the inner porosity is produced because solidification occurs from both the inner and outer surfaces... 

Biological thiols are crucial substances that play an essential role in several biological processes and activities in the body. Hence, the fluctuation of their concentrations can be used as a diagnostic sign for numerous disorders. In contrast, the ratio of these thiols to their disulfide form within the cell is useful as an indicator for determining cytotoxicity. Hence, it is crucial for develop a simple yet efficient analytical technique for quickly recognizing and determining them. The purpose of this study is to develop a plasmonic colorimetric sensor by utilizing gold nanorods (AuNRs). This sensor aims to accurately measure and distinguish between cysteine (CYS) and glutathione (GSH),... 

Functional design of coating system for the primary mirror of the Iranian National Observatory (INO) is done. This telescope has a 3.4 m primary mirror in diameter, made of Zerodur from Schott. Although similar coating systems are in use since years ago, this is the first attempt to design a system for such a large surface case in Iran. Systematic approach led us first to clarify and identifying the design requirements. Lower limit of 80% for reflectance on all wavelength range from 325-1000 nm, thickness of 100 nm with un-uniformity of 5 nm, adhesion enough to pass the selotape test and surface roughness of less than 8 nm. Study of the available methods for coating and selection of the best... 

In several electro-optic and optoelectronic devices, we require the structures with simultaneous high electrical conductivity and optical transparency so as to transmit the incident light. Transparent Conductive Electrodes (TCEs) that are both highly conductive and transparent were introduced to be an answer to the mentioned challenge. Periodic arrays of metallic holes are amongst the most important structures that are used as transparent electrodes. Using the metals with low electrical resistivity, such as Au and Ag, provides these structures with high electrical conductance. On the other hand, since these micro/nano structures support the propagation of guided electromagnetic waves, light... 

The main purpose in this thesis is the finite element simulation of thermal barrier coatings (TBC), subjected to residual stresses due to the coating process followed by thermo-mechanical fatigue loadings. This finite element modeling is performed in the ABAQUS software. In order to consider the actual condition of thermal barrier coating, models are defined based on a SEM image including real roughness and porosity of coating layers using image processing technique.
Two-step residual stress taking into account both coating process of bond coat and top coat layer is performed. Pre- heating of substrate and bond coat in order to reach comperessive stresses in coating layers has been... 

An inexpensive microfluidic chip–silicon rubber–based system was fabricated. A triangle–shaped micro canal with a 135 µm width and 234 µm depth was grooved by laser ablation technique. The groove was sealed by a thin glass cover while two pieces of stainless steel tubings were connected to each side of canal. Then, a polyaniline film with a thickness of 17±1 µm was synthesized on the walls of the canal by chemical oxidation using a syringe pump to deliver the relevant reagents. The microfluidic system was eventually connected to gas chromatography-mass spectrometry. To evaluate the capability of the constructed fluidic system, it was implemented to the analysis of sub–mL volumes of... 

In this research we developed a superhydrophobic and anti-wear coating on a glass substrate using SiO2 nanoparticles to form a transparent superhydrophobic thin film and SiC nanoparticles to improve the wear resistance of coating.
Silica nanoparticles were produced via a simple sol gel method from Tetraethylorthosilicate (TEOS) as precursor. Hexamethyldisilazane (HMDS) and Tetramethylclourosilane (TMCS) were used as hydrophobic inducing agents and at last SiC nanoparticles were dispersed in the solution in order to provide wear resistance. The final results indicate the contact angle (CA) of water droplet on the surface was about 158° and sliding angle (SA) lower than 9°. Studying the...