Sharif Digital Repository

The conductive CuCo2O4 spinel coating is applied on the surface of the AISI 430 ferritic stainless steel by the dip-coating sol-gel process and it is evaluated in terms of the microstructure, oxidation resistance and electrical conductivity. The results show that the CuCO2O 4 coating forms a double-layer scale consisting of a Cr, Fe-rich subscale and Cu-Co spinel top layer after 500 h in air at 800 °C. This scale is protective, acts as an effective barrier against Cr migration into the outer oxide layer and alleviates the cathode Cr-poisoning. The oxidation resistance is significantly enhanced by the protective coating with a parabolic rate constant of 5.8 × 10-13 gr2 cm-4 s -1, meanwhile... 

Reynolds-Averaged Navier-Stokes (RANS) approach with the k-ε closure model is employed for the first time to simulate direct Solid-Phase Micro-Extraction (SPME) computationally. Simulations are performed by using COMSOL Multiphysics in order to examine methods to decrease the extraction time. Experiments are also conducted to support data obtained from the numerical framework. Di-n-Butyl Phthalate (DNBP) and etched steel wire are chosen as the analyte and the adsorbent, respectively. Stirring rate, fiber's location, stirrer magnet's size, and the method of sample rotation are examined to decrease the extraction time. In addition, the effects of adding a baffle to the vial and implementing a... 

A luminescent coating of CaAlSiN3:Eu2+ particles applied on photoanode (TiO2) layer of SQ1 sensitized solar cell by doctor blading the paste of phosphor particles. The luminescent layer acted as a dual functional layer and enhanced the short circuit current density (JSC) by 64% via both scattering effect and downshifting of the photons in 400-600nm spectral range to photons in 600-800nm spectral range. Considerable relative enhancement in incident photon to current conversion efficiency (IPCE) up to 350% in 400-600nm spectral range proves the down shifting effect as the dominant factor for the improved performance of dye sensitized solar cell (DSSC). © 2016 Elsevier B.V  

A luminescent coating of CaAlSiN3:Eu2+ particles applied on photoanode (TiO2) layer of SQ1 sensitized solar cell by doctor blading the paste of phosphor particles. The luminescent layer acted as a dual functional layer and enhanced the short circuit current density (JSC) by 64% via both scattering effect and downshifting of the photons in 400–600 nm spectral range to photons in 600–800 nm spectral range. Considerable relative enhancement in incident photon to current conversion efficiency (IPCE) up to 350% in 400–600 nm spectral range proves the down shifting effect as the dominant factor for the improved performance of dye sensitized solar cell (DSSC). © 2016 Elsevier B.V  

A new micro-solid phase extraction method was developed by combining solid-phase extraction and stir bar sorptive extraction to benefit from the advantages of both techniques. A polypyrrole coating was electrochemically synthesized on the surface of an already used graphite furnace, employed in electro-thermal atomic absorption spectroscopy. The cylindrical geometry of the graphite tube provided a rather huge surface area, suitable for sorptive extraction. The novel sorbent coating was examined as an extracting medium to isolate malathion. Effects of different parameters such as extraction time, salt concentration, sample volume, desorption solvent and time were investigated and optimized.... 

Aperiodic perforated graphene layers were synthesized and used in fabrication of optical nanocavity absorbers. Chemical vapor deposition-grown graphene (Gr) layers were exposed to oxygen plasma etching to obtain the perforated graphene (pGr). The fabricated pGr/SiO2 (68 nm)/Ag (150 nm) nanocavity could present significant higher optical absorption, especially at around 530 nm wavelength region, as compared to a benchmark Gr/SiO2 (68 nm)/Ag (150 nm) sample. The effect of pore size of the pGr layer on the absorption property of the nanocavity has been studied by both experimental and numerical methods. The dependence of the absorption property of the nanocavity on the incident angles of... 

Apatite-coated Ag/AgBr/TiO2 was prepared by deposition of Ag as novel metal to generate electron-hole pairs by extending the excitation wavelength to the visible-light region, AgBr, and hydroxy apatite as photosensitive material and adsorption bioceramic, respectively. The energy dispersive X-ray spectrometry clearly showed the presence of Ti, Ag, Ca, and P elements on the surface of catalyst. The bactericidal experiments in dark media indicated that only the novel catalyst shows inhibiting growth of bacteria in this case. A transmission electron microscopy image illustrated that catalyst nanoparticles adhere to the outer membrane of the cell and act as an inhibitor to the nourishment of... 

In this work a novel unbreakable sol-gel-based in-tube device for on-line solid phase microextraction (SPME) was developed. The inner surface of a copper tube, intended to be used as a high performance liquid chromatography (HPLC) loop, was electrodeposited by metallic Cu followed by the self assembled monolayers (SAM) of 3-(mercaptopropyl) trimethoxysilane (3MPTMOS). Then, poly (ethyleneglycol) (PEG) was chemically bonded to the -OH sites of the SAM already covering the inner surface of the copper loop using sol-gel technology. The homogeneity and the porous surface structure of the SAM and sol-gel coatings were examined using the scanning electron microscopy (SEM) and adsorption/desorption... 

Anti-reflection and self-cleaning coatings on the glass substrate are used to improve the performance of solar systems. TiO2 are one of the most used semiconductors for this application. In this research meso-porous TiO2 coatings (that synthesized by the sol-gel process) with the various extent of porosity (using different concentrations of Pluronic F127, as pore-forming agent) have been investigated. The coating's thickness and porosity and anti-reflective properties were studied by FE-SEM and UV/VIS spectrometer (transmission spectra test), respectively. It was found that the use of F127 leads to the formation of pores smaller than 30 nm and increases the surface roughness from 1.5 (for... 

In this study, the anticorrosive effect of dodecylbenzenesulfonicacid-doped polyaniline nanoparticles [n-PANI (DBSA)] as a conductive polymer was investigated using electrochemical impedance spectroscopy (EIS) and X-ray photoelectron spectroscopy (XPS) techniques. Initially, the n-PANI (DBSA) were successfully synthesized via inverse microemulsion polymerization leading to the spherical nanoparticles with an average diameter less than 30 nm. Two coating systems including 1 wt% n-PANI(DBSA) blended epoxy ester (n-PANI(DBSA)/EPE) and neat epoxy ester (EPE) were coated on the carbon steal substrate. The anticorrosion performance of the prepared coatings was studied using EIS measurement in 3.5%... 

Abstract: In this study, chitosan–Laponite nanocomposite coatings with bone regenerative potential and controlled drug-release capacity are prepared by electrophoretic deposition technique. The controlled release of a glycopeptide drug, i.e. vancomycin, is attained by the intercalation of the polymer and drug macromolecules into silicate galleries. Fourier-transform infrared spectrometry reveals electrostatic interactions between the charged structure of clay and the amine and hydroxyl groups of chitosan and vancomycin, leading to a complex positively-charged system with high electrophoretic mobility. By applying electric field the charged particles are deposited on the surface of titanium... 

A surface to separate oil–water mixtures is a global concern and highly needed particularly in oil industries. The present study was conducted to create a novel superhydrophilic/superoleophobic nanocomposite coating on the stainless-steel mesh for the aim of oil/water separation. Different hydrophilic resins along with PFOA as oleophobic agent with 15 flours in its chemical structure and various oxide nanoparticles containing SiO2 and TiO2 at different concentrations were studied to achieve superhydrophilic/superoleophobic surface. The fabricated nanocomposites were fully characterized via field-emission scanning microscopy (FESEM), atomic force microscopy (AFM) and Fourier-transform... 

In terms of manufacturability, there is a high tendency to deposit light-absorbing CuInS2 films by solution processing methods like ink-based depositions. In particular, for nanoparticle inks, the synthesis of highly dispersed and stable inks, with uniformity in the deposition process, is a serious challenge. Here, we demonstrate a novel two-step low-temperature CuInS2 film deposition method in which the In2S3 is deposited first. It then partially is converted into CuInS2 through the infiltration of Cu+ ions in the In2S3 layer in a dip-coating process. The resulting films are highly uniform, with diffraction peaks indicating the formation of pure CuInS2 phase. The proper stoichiometry of... 

A hierarchical superhydrophobic surface is prepared via a two-step boiling water immersion process and anodization of the treated aluminum substrate in a novel hydrophobic electrolyte of aluminum nitrate and stearic acid mixture at room temperature. The immersion time in boiling water had a significant influence on the morphology and durability of the sample. A pseudoboehmite coating is created on the aluminum surface during the boiling process, as revealed by the field emission scanning electron microscopy (FE-SEM) and Fourier transform infrared (FTIR) spectrophotometer results. The energy-dispersive x-ray spectroscopy analysis confirmed the formation of hydrophobic coating surface after... 

In this work, a novel and facile synthesis process to fabricate single crystalline organometal halide perovskite nanowires has been successfully developed. Nanowires were grown in a high density ordered array from metal nanoclusters inside anodic aluminum oxide templates using a non-catalytic chemical vapor deposition method. Specifically, perovskite NWs were grown as a result of the reaction between methylammonium iodide (MAI) and the Pb/Sn (Pb or Sn) metal in anodic aluminum oxide templates under optimal conditions. The characterization results show that there is a reaction zone at the interface between the perovskite material and metal, at the bottom of the anodic aluminum oxide... 

Titanium is a highly reactive metal with an inclination to compose with oxygen. In order to increase its corrosion resistance and application, therefore, a thin layer of titanium oxide is produced on the surface by chemical and electrochemical methods. In the present research, titanium has been anodized in 20 M of NaOH solution under potentiostatic conditions at constant voltages of 25 and 35 V. The microstructure of the anodic layers has been studied by the use of a Scanning Electron Microscope (SEM) and X-Ray Diffraction (XRD). The results indicated that the structure of the anodic layers is amorphous with low porosity and that thickness increases with an increase in anodizing voltage. The... 

A new unbreakable solid phase microextraction (SPME) fiber coating based on aniline-silica nanocomposite was electrodeposited on a stainless steel wire. The electropolymerization process was carried out at a constant deposition potential, applied to the corresponding aqueous electrolyte containing aniline and silica nanoparticles. The scanning electron microscopy (SEM) images showed the non-smooth and the porous surface structure of the prepared nanocomposite. The applicability of the new fiber coating was examined by headspace-solid phase microextraction (HS-SPME) of some environmentally important polycyclic aromatic hydrocarbons (PAHs), as model compounds, from aqueous samples.... 

A thin coating made of linear elastic functionally graded material (FGM) perfectly bonded to an elastic substrate is considered. This work which is of particular interest to tribological community is devoted to the determination of the thermal and mechanical stresses due to mixed normal and tangential Hertzian surface pressure. The thermomechanical properties of the FGM coating are assumed to vary exponentially through the thickness. Solutions for temperature rise and stresses are obtained by use of Fourier transform technique. The influences of coating thickness, Peclet number and friction coefficient on temperature rise and stresses in the FGM coating are investigated. Comparative studies... 

In this research, inorganic copper thiocyanate (CuSCN) hole transport layer (HTL) was applied in conventional structure of perovskite solar cells (PSCs). Besides, mixed halides perovskite (Cs0.05(MA0.17FA0.83)0.95Pb(I0.83Br0.17)3) was utilized as the light absorbing layer and deposited on FTO/compact TiO2 substrates through a one-step coating method in ambient condition. The mentioned perovskite is more stable against high temperature, high irradiation and humidity compared to commonly applied MAPbI3 perovskite. Nevertheless, the CuSCN could not be well dissolved in usual dipropyl sulfide solution and should be deposited for several times to achieve suitable thickness, this could reduce the... 

Simultaneous enhancement of osseointegration and bacterial infection prohibition through surface modifications is a challenging but promising approach to achieve durable implantation. To that end, we present a multifunctional surface coating composed of graphene nanolayers and hierarchical well-aligned TiO2 nanotubes with a nanoporous top layer (cRTNT). FESEM studies reveal tunable increasing island morphologies of graphene nanolayers (G) on cRTNT by a cyclic voltammetry process. XPS analysis shows that the enhanced interface chemistry is due to TiO2-carbon bonding. The roughness of the sample containing a medium amount of graphene, cRTNT-75%GO, was calculated ∼289 nm, which was 543% higher...