Sharif Digital Repository

This work is concerned with the experimental investigation of mass transfer, which occurs during diffusion of hydrocarbon solvents in heavy oil based on constant and concentration-dependent diffusion coefficient. Here, a series of free fall diffusion experiments have been conducted in sealed test tubes at fixed temperatures. Pentane, hexane, and octane were used as solvents and were placed on heavy oil in tubes. The diffusivity of heavy oil into solvents was monitored by a digital camera. The image analysis technique was applied to extract concentration profiles in diffusion zones of solvents by means of calibration curves. Fick's second law was used to obtain both constant and... 

In this work, a mathematical model was developed to simulate the urinary concentration mechanism. A 3-D geometry was derived based on the detail physiological pictures of rat kidney. The approximate region of each tubule was obtained from the volume distribution of structures based on Walter Pfaller's monograph and Layton's region-based model. Mass and momentum balances were applied to solve for the change in solutes concentration and osmolality. The osmolality of short and long descending nephrons at the end of the outer medulla was obtained to be 530 mOsmol/kgH2O and 802 mOsmol/kgH2O, respectively, which were in acceptable agreement with experimental data. The fluid osmolality of the short... 

Background: Purified terephthalic acid (PTA) wastewater from a petrochemical complex was utilized as a fuel in the anode of a microbial fuel cell (MFC). Effects of two important parameters including different dilutions of the PTA wastewater and pH on the performance of the MFC were investigated. Methods: The MFC used was a membrane-less single chamber consisted of a stainless steel mesh as anode electrode and a carbon cloth as cathode electrode. Both power density and current density were calculated based on the projected surface area of the cathode electrode. Power density curve method was used to specify maximum power density and internal resistance of the MFC. Results: Using 10-times,... 

Nanoparticles (NPs) are increasingly being used in different branches of science and in industrial applications; however, their rapid detection and characterization at low concentration levels have remained a challenge; more specifically, there is no single technique that can characterize the physicochemical properties of NPs (e.g. composition and size). In this work we have developed a colorimetric sensor array for defining the physicochemical properties of NPs in aqueous solution with ultra-low concentrations (e.g. 10-7g ml-1 for gold NPs). Various NPs were readily identified using a standard chemometric approach (i.e. hierarchical clustering analysis), with no misclassifications over 400... 

Electric arc welding is a routine operation in the construction of metallic structures, but the fumes generated during the welding process can threaten the health of welders. Fumes are undesirable products of the majority of welding operations and may have various detrimental effects on health. The purpose of this study was to investigate the effect of operational parameters of the shielded metal arc welding SMAW process on the emission of fumes. A dust monitor was used to measure the number and mass concentration of fumes generated by SMAW. Measurements were made at the distances of 23 cm hood inlet and 41 cm welder’s breathing zone from the weld point, with different values assigned to... 

Mass transfer rates to the drops in liquid-liquid extraction equipment are often likely to be reduced by the presence of surface active contaminants. This reduction in mass transfer is said to be due to a reduction in terminal velocity, and to changes in pattern of internal circulation. A single-drop extraction apparatus was used to investigate the dependency of mass transfer coefficient on the amount of surfactant added in a system of n-butanol/succinic acid/water. Three types of surfactants, SDS, DTMAC and Triton X-100, were used to study their effects on the inhibition of mass transfer in liquid-liquid extraction. The effect of surfactants concentration on extraction percentage, overall... 

The curve of exhaled inert gas concentration against exhaled volume is called gas washout curve. The slope at the end part of gas washout curve (Sn) is a measure of structural abnormalities. Sn depends on the spatial concentration distribution and dynamic of gas washout, which depends on several mechanisms including asymmetry of airways, nonhomogeneous ventilation, sequential emptying, and gas exchange with blood. Due to a large number of airways in human lungs, using simplified models is inevitable. On the other hand, these simplified models cannot capture some of the mentioned mechanisms and subsequently were not able to predict experimental trend of change in Sn with breath number in... 

The curve of exhaled inert gas concentration against exhaled volume is called gas washout curve. The slope at the end part of gas washout curve (Sn) is a measure of structural abnormalities. Sn depends on the spatial concentration distribution and dynamic of gas washout, which depends on several mechanisms including asymmetry of airways, nonhomogeneous ventilation, sequential emptying, and gas exchange with blood. Due to a large number of airways in human lungs, using simplified models is inevitable. On the other hand, these simplified models cannot capture some of the mentioned mechanisms and subsequently were not able to predict experimental trend of change in Sn with breath number in... 

Phenol is one of the aromatic hydrocarbons. Phenol and its derivatives are highly toxic. These pollutants can be observed in the effluents of many industries. This research investigates the removal of phenol by the use of activated sludge in a batch system. The effects of influencing factors on biodegradation efficiency have been evaluated. The main factors considered in this study were the volume of acclimatized activated sludge inoculation, pH, temperature, and initial concentration of phenol. The inoculation volumes of 1, 3, and 5 mL of acclimatized activated sludge were taken into account. Different pH values of 3, 5, 7, 9, and 11 were examined. The experiments were conducted for... 

Mazut as a source content of various hydrocarbons is hard to be degraded and its cracking could turn mazut into useful materials. Nevertheless degradation of mazut by routine methods is too expensive but application of indigenous microorganisms as biocatalysts could be effective and important to lower the costs and expand its consumption. Mazut biodegradation can be improved using various strategies; Therefore in this study newly isolated strain Enterobacter cloacae BBRC 10061 was used in a method of gradual addition of mazut into medium and its results were compared with simple addition method. To investigate degradation of mazut by BBRC 10061, influence of increase of mazut concentration... 

Reduction of stress concentrations in the area of pin-loaded holes is one of the greatest challenges in the design of multilayered fibre-reinforced composite structures. Among many approaches to decrease concentration effects, putting metallic inserts in the holes is a convenient method. In this research, finite element analysis is applied to assess the effects of manufacturing parameters on stress concentration in the vicinity of the holes in composite plates with inserts. Edge and pitch distance, thickness and materials of insert, clearance between insert and composite part, and stiffness of the adhesive filling the gap are studied in this article. Investigations show that the optimum... 

Abstract Background: The aim of this study is to accelerate and improve aerobic granulation within a Sequencing Batch Reactor (SBR) by cationic polymer addition. Methods: To identify whether the polymer additive is capable of enhancing granule formation, two SBRs (R1 and R2, each 0.15 m in diameter and 2 m in height) are used by feeding synthetic wastewater. The cationic polymer with concentration of 30 to 2 ppm is added to R2, while no cationic polymer is added to R1. Results: Results show that the cationic polymer addition causes faster granule formation and consequently shorter reactor start-up period. The polymer-amended reactor contains higher concentration of biomass with better... 

In this paper a novel refractive structure for increasing the performance of photovoltaic cells1 is proposed. This structure which is named back-to-back-Fresnel lens is similar to conventional Fresnel lens used for energy concentration on PV cells while comprising some superior features. Among these features is its thinness, just like Fresnel lens, and lower loss of energy and simpler structure and design compared to a Fresnel lens with similar properties. The proposed lens is experimentally tested with a PV cell while the obtained results confirm its superior features  

Effects of initiator and surfactant concentrations and temperature on styrene conversion and polymer particle size distribution (PSD) in a batch emulsion polymerization are investigated through simulation and experimental studies. The detailed model based on population balance (zero-one model), accounting for nucleation, growth and coagulation phenomena has been used for prediction of particle size distribution. In checking the effect of initiator concentration on final PSD, it was noticed that when critical micelle concentration (CMC) is kept constant, the model cannot predict PSD very well. Thus, a correlation for calculating critical micelle concentration has been proposed and...