Sharif Digital Repository

Summary Conventional design methods do not ensure that the desired collapse mechanism is developed at target displacement. In this paper, a case study is presented to analyze concentrically braced frames with steel shear panel (CBFSP). Also, extensive investigation in the failure modes are made, to have the global yielding mode at the final state. For this purpose, each of one-story, three-story, six-story and nine-story CBFSP models were decomposed into three parts where the members' closed-form equations of internal forces were identified and superimposed. On the basis of the kinematic theorem of plastic collapse, the possible mechanisms and the related energy equations were defined to... 

Nanostructured molybdenum oxide having a particle size in the range of 30-80 nm was prepared by potentiodynamic electrodeposition method, and the effects of H2SO4 concentration on its capacitive behavior were studied by cyclic voltammetry, galvanostatic discharge, and electrochemical impedance spectroscopy. Poor to fair capacitive behaviors were witnessed depending on the electrolyte concentration and conditions of charge/discharge. Increasing acid concentration to 0.02 M had favorable effect, while beyond that, the effect was detrimental. Capacitance around 600 F g-1 was recorded in the potential range of 0 to -0.55 V vs. Ag/AgCl  

Development of a model for optimal power generation from the thermal oxidation of a low concentration coal bed mine has been considered as the main objective of this investigation. The model has been applied to identify the optimal thermodynamic characteristics of the power generation system through using a mixture with 1.6% methane concentration in a recuperative lean-burn gas turbine and coupling a gas engine to the system for more power generation from the remaining coal bed methane. The implementation of the model based on the real site condition would lead to the generation of 6.97 MW electricity in Tabas coal mine of Iran. © 2016 Taylor & Francis  

Nanofluids viscosity is one of the most important thermophysical properties in nanofluids usage especially in chemical and petroleum engineering applications. So it is highly desirable to predict the viscosity of nanofluids accurately. Experimental measurements are impossible in most situations and present models are not comprehensive and efficient especially for high temperature, high volume concentration and high viscosity values. In this study, a new correlation has been developed based on the comprehensive database of water based Al2O3, TiO2, SiO2 and CuO nanofluids viscosity data found in literature. The proposed correlation uses temperature, nanoparticle size, nanoparticle volumetric... 

In this research, the airflow pattern and particle dispersion in a contaminated full-scale cleanroom are investigated numerically using both Eulerian and Lagrangian approaches. Three different supply diffuser configurations namely (1) central, (2) horizontal and (3) vertical and three different exhaust grille configurations namely (4) vertical symmetric, (5) asymmetric and (6) horizontal symmetric are selected for the analysis. The presented results reveal that the supply/exhaust openings arrangement has a significant influence on the particulate contaminant dispersion in the cleanrooms. The comparison of the above different supply diffuser configurations shows that the vertical and... 

Forecasting is a challenging problem in highly nonlinear dynamic systems. The main goal in development of forecasting models in complex systems is to produce a model that can accurately behave similar to the main system. In problems such as air pollution forecasting, the presence of uncertainties and nonlinearities affects the model's precision. In this paper, ozone concentration, which is well-known as an index for air pollution is forecasted using neuro-fuzzy models. Causal variables are integrated in the models in order to enhance the model's performance. The results are compared to a fuzzy logic approach to demonstrate reliability and accuracy of the proposed model using real observed... 

This research is aimed at geometric analysis of parabolic trough solar collector (PTC) in different sizes of the main components of the system. The rate of the Local Concentration Ratio (LCR) on the receiver tube and optical efficiency are two main features in geometric optimization of the parabolic trough solar collectors. In this work, parabolic trough solar collector was optimized for different sizes with three design variables: the receiver diameter, the collector aperture width and the rim angle. The method used in this research was the Monte Carlo Method (MCM) in MATLAB. The optical and geometric modeling was developed for coding in MATLAB. For the case study, a parabolic trough solar... 

Pulsating heat pipes are cooling devices that are partially filled with working fluid. Working fluid thermophysical properties affect the thermal performance of pulsating heat pipes. In this research, the effect of adding a Triton X-100 surfactant to pure water and using the mixture as a working fluid is investigated experimentally. The results indicate that adding surfactant leads to improvement in the thermal performance of the pulsating heat pipe. In particular, the maximum of the thermal resistance improvement is about 61%, which is attributed to 0.01% surfactant concentration. Higher heat transfer ability is attributed to lower surface tension and the contact angle of the mixture... 

The biofluids being manipulated in lab-on-a-chip devices usually contain elastic macromolecules. Accordingly, for an accurate modeling of the relevant flow physics one should invoke viscoelastic constitutive equations. In this paper, attention is paid toward the hydrodynamic dispersion by the fully developed electroosmotic flow of PTT viscoelastic fluids in slit microchannels of low zeta potential. Adopting the Taylor–Aris approach, analytical solutions are derived for late-time solute concentration and effective dispersion coefficient. Finite element-based numerical simulations are also conducted to monitor the broadening of an analyte band from the moment of injection. Both approaches are... 

In this work, the partition coefficients of Cephalexin in aqueous two-phase systems containing PEG [poly(ethylene glycol)] 4000, 10000 and K 2HPO4, Na3Citrate (C6H 5Na3O7 5, 5H2O) have been measured. The experimental data were obtained in a wide range of temperatures, (28.2 to 37.2) °C. The effects of temperature, pH, polymer concentration, polymer molecular weight, and salt concentration on the partitioning of Cephalexin were also studied. The results showed that salt concentration has a large effect on the partition coefficient, and temperature has an almost negligible effect. The Chen-NRTL Gibbs energy model was used to correlate the experimental results. © 2009 American Chemical Society  

The effect of glucose concentration in submerged fermentation (SMF) on chitosan production by Aspergillus niger was investigated. A. niger, BBRC, 20004, from the Biochemical and Bioenvironmental Research Centre at Sharif University of Technology, Tehran, Iran, was grown in a Sabouro Dextrose media. Chitosan was extracted from the fungal mycelia using hot alkaline and acid treatment and after 12 days of cultivation, 0.8455 g chitosan /l of the fermentation medium was obtained. The content of glucose in the Sobouro Dextrose Broth media was also changed and the highest yield of chitosan 0.9121 g/l was obtained in Sobouro Dextrose Broth media containing 8% glucose. © Sharif University of... 

Miniaturized culture systems of hepatic cells are emerging as a strong tool facilitating studies related to liver diseases and drug discovery. However, the experimental optimization of various parameters involved in the operation of these systems is time-consuming and expensive. Hence, developing numerical tools predicting the function of such systems can significantly reduce the associated cost. In this paper, a perfusion-based three dimensional (3D) bioreactor comprising encapsulated human liver hepatocellular carcinoma (HepG2) spheroids are analyzed. The flow and mass transfer equations for oxygen as well as different metabolites such as albumin, glucose, glutamine, ammonia, and urea were... 

The purpose of this study was the production of copolymers and terpolymers with highly hydrophilic–hydrophobic properties, using inexpensive and available monomers as potential enhancing oil recovery (EOR) and water production control agents for high-temperature and high-salinity (HTHS) oil reservoirs. For this purpose, several copolymers and terpolymers with different molar percentage of acrylamide/styrene, acrylamide/maleic anhydride, and acrylamide/styrene/maleic anhydride were synthesized by the inverse emulsion polymerization technique. The presence of hydrophobic styrene and hydrophilic maleic anhydride monomers in the copolymer and terpolymer structure, provided some unique properties... 

The impact of modified magnetite nanoparticles (MMNPs)on hydrodynamics and mass transfer in liquid–liquid extraction process was assessed using a ternary chemical system of toluene-acetic acid–water. The organic phase which contained toluene and acetic acid was dispersed through water, and the mass transfer of acetic acid between two phases was investigated. The hydrophobic modified magnetite nanoparticles (MMNPs)prepared through an optimized in-situ method were added to the dispersed phase at different concentrations (0.001−0.005 wt%). Two separate conditions were provided in the experiments, i.e. stagnant and stirred continuous phase. The latter case was provided by a rotor at two... 

In the present study, the ACF-TiO2 catalyst was synthesised and used as a catalyst for the destruction of toxic cyanide in both synthetic and real industrial wastewaters. The ACF-TiO2 catalyst was found to be micro-porous with the BET surface area of 163 m2/g. The effect of different operational parameters such as catalyst concentration, cyanide concentration, operation time, and ozone concentration were target parameters in the present study. The findings show that 500 mg/L of catalyst is the optimum value for the photocatalytical process to completely oxidise 25 mg/L of cyanide within 10 min. While it was found that 300 mg/L of catalyst in the presence of 200 mg/h ozone is enough to remove... 

Ultra-deep desulfurization for production of clean fuels is of great significance from environmental outlook. In this paper, adsorptive desulfurization (ADS) of wild naphtha was investigated in pilot scale using Mg(OH)2-impregnated aluminosilicate ceramic foam filters (ASCFs) as adsorbent. Effects of four operating parameters including temperature, pressure, adsorption bed length and initial sulfur concentration on sulfur removal efficiency of the process were studied via central composite design of experiment methodology. Sobol's sensitivity analysis was employed to quantitatively determine the impacts of the operating parameters on the removal performance of the separation system. The... 

Photo-oxidation of dyes is a new concern among researchers since it offers an attractive method for decoloration of dyes and breaks them into simple mineral forms. An advanced oxidation process, UV/H2O2, was investigated in a laboratory scale photoreactor for decolorization of the Reactive blue 19 (RB19 dye from synthetic textile wastewater. The effects of operating parameters such as hydrogen peroxide dosage, pH, initial dye concentration and UV dosage, on decolorization have been evaluated. The RB19 solution was completely decolorized under optimal hydrogen peroxide dosage of 2.5 mmol L-1 and low-pressure mercury UV-C lamps (55 w) in less than 30 min. The decolorization rate followed... 

In this work, the Ion Pair Modified Ghotbi-Vera Mean Spherical Approximation (IP-MGV-MSA) model was proposed to correlate the mean ionic activity coefficients (MIAC) for a number of symmetric and asymmetric aqueous electrolyte solutions at 25 °C. The new model is based on the recently proposed MGV-MSA model by Mortazavi-Manesh et al. In the IP-MGV-MSA model, the effects arising from the ion pair formation in the electrolyte solution was taken into account. Also, in the proposed model, while the cation diameter as well as the relative permittivity of water was considered to be dependent on electrolyte concentration, the anion diameter was independent of electrolyte concentration. The results... 

The gravity currents on the inclined boundaries are formed when the inflow fluid has a density difference with the ambient fluid and a tangential component of gravity becomes the driving force. If the density difference arises from the suspended particles, the currents are known as particle-laden density currents, or turbidity currents in which the local density depends on the concentration of particles. A low Reynolds k- Turbulent model is used to simulate three dimensional turbidity currents. Also some laboratory tests were conducted to study the 3D flow resulting from the release of particle laden density currents on a sloping surface in a channel of freshwater via a sluice gate. Kaolin... 

Over the last two decades, mathematical modeling has become a popular tool in study of blood coagulation. This paper describes the coagulation pathway and presents a mathematical model for the generation of blood clot in human vasculature. Parameters of interest in this study include procoagulants and anticoagulants whose activity may be enhanced by various activator enzymes. The process of human blood clotting involves a complex interaction between these parameters and continuous time and state processes. In this work, we propose to model these highly inter-relational processes by a set of nonlinear chemical rate equations. We have modeled this process as a dynamical system, as chemical...