Sharif Digital Repository

In the present study, the structural features, corrosion behavior, and in vitro bioactivity of TiO 2 nanotubular arrays coated on Ti–6Al–4V (Ti64) alloy were investigated. For this reason, Ti64 plates were anodized in an ammonium fluoride electrolyte dissolved in a 90:10 ethylene glycol and water solvent mixture at room temperature under a constant potential of 60 V for 1 h. Subsequently, the anodized specimens were annealed in an argon gas furnace at 500 and 700 °C for 1.5 h with a heating and cooling rate of 5 °C min −1 . From XRD analysis and Raman spectroscopy, a highly crystalline anatase phase with tetragonal symmetry was formed from the thermally induced crystallization at 500 °C.... 

Nucleic acid amplification using polymerase chain reaction (PCR) method has been widely used in different fields such as agricultural science, medicine, pathogen identification, and forensics to name a few. Today, it seems inevitable to have a robust, simple PCR system for diagnostics at the point-of-care (POC) level. Many photonic PCR systems have been proposed in the literature that benefit from plasmonic photothermal heating to achieve the common PCR thermal cycling. However, non-homogeneous temperature distribution is a challenge in some of them. In the present work, to achieve more efficient gene amplification, the effect of adding TiO2 nanoparticles has been investigated in a photonic... 

Nucleic acid amplification using polymerase chain reaction (PCR) method has been widely used in different fields such as agricultural science, medicine, pathogen identification, and forensics to name a few. Today, it seems inevitable to have a robust, simple PCR system for diagnostics at the point-of-care (POC) level. Many photonic PCR systems have been proposed in the literature that benefit from plasmonic photothermal heating to achieve the common PCR thermal cycling. However, non-homogeneous temperature distribution is a challenge in some of them. In the present work, to achieve more efficient gene amplification, the effect of adding TiO2 nanoparticles has been investigated in a photonic... 

The effects of real and Gleeble simulated double pass thermal cycles on the properties of the intercritically reheated coarse grained heat affected zones in X80 microalloyed pipeline steel has been investigated. The Gleeble simulated process involved heating the X80 steel specimens to the first peak temperature of 1400°C and then reheating to the second peak temperature of 800°C, with different cooling rates. The size and area fraction of martensite/austenite (M/A) constituents were obtained by a combination of field emission scanning electron microscopes and image analysis software. In addition, misorientation was characterized by electron back-scatter diffraction analysis. It is clear that... 

The present paper deals with different effects of homogenization time and cooling environment on Ni-42.5wt%Ti-7.5wt%Cu alloy. The alloy was prepared by vacuum arc melting. Afterwards, three homogenization times (half, one and two hour) and three cooling environments (water, air and furnace) at 1373 K were selected. Optical and Scanning Electron Microscopic methods, EDX, DSC and hardness tests have been used to evaluate the microstructure, transformation temperatures and hardness. Results indicate that specimens that were cooled in air are super-saturated. Also, the microstructure from furnace cooling has many disparities with the other cooling environments' microstructure and two types of... 

The influence of thermal cycles on the properties of the coarse grained heat affected zone in X80 microalloyed steel has been investigated. The thermal simulated involved heating the X80 steel specimens to the peak temperature of 1400 °C, with different cooling rates. The four-wire tandem submerged arc welding process, with different heat input values, was used to generate a welded microstructure. The martensite/austenite constituent appeared in the microstructure of the heat affected zone region for all the specimens along the prior-austenite grain boundaries and between the bainitic ferrite laths. The blocky-like and stringer martensite/austenite morphology were observed in the heat... 

The objective of this paper is to study the influence of the second peak temperature during real and simulated welding on properties of the subcritically (S), intercritically (IC) and supercritically (SC) reheated coarse grained heat affected (CGHAZ) zones. The X80 high strength pipeline microalloyed steel was subject to processing in a double-pass tandem submerged arc welding process with total heat input of 6.98 kJ/mm and thermal cycles to simulate microstructure of reheated CGHAZ zones. This involved heating to a first peak temperature (TP1) of 1400 °C, then reheating to different second peak temperatures (TP2) of 700, 800 and 900 °C with a constant cooling rate of 3.75 °C/s. Toughness of... 

A mathematical model is developed to assess the solidification behaviour of the weld pools. To do so, during gas tungsten arc welding of commercial pure aluminium, equations of conversation of mass, energy and momentum are numerically solved considering three-dimensional steady state heat transfer and fluid flow conditions. The weld pool geometry, weld thermal cycles and various solidification parameters are calculated using temperature and velocity fields acquiring from the utilised model. The solidification behaviour of the weld pool at the weld centreline and the fusion line is then studied using the solidification parameters including temperature gradient G, solidification rate R and the...