Sharif Digital Repository

In this study, MoS2/reduced graphene oxide (rGO) was used as a cocatalyst to synthesize very highly efficient Cu2O/MoS2/rGO for cooperative catalytic applications. The resulting nanocomposite was characterized by various analytical techniques and applied for catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol and photocatalytic degradation of Acid blue 92. Cu2O/MoS2/rGO composite presents superior performance to pure Cu2O particles in both catalytic and photocatalytic reactions. This excellent activity demonstrates synergistic effect of MoS2/rGO as a cocatalyst in the nanocomposite. The role of the active sites in the reduction of 4-NP and degradation of dye was discussed and... 

Up to now, multifunctional varistor-capacitor materials were based on TiO2, even though these materials failed to have practical applications. For the first time, in this research, multifunctional varistor-capacitor properties are observed in the CuO-doped SnO2-CoO-Sb2O3 system. The XRD analysis showed that this system has a single phase microstructure. SEM images indicated that the CuO addition resulted in a better densification and larger grain size. The very low electric breakdown field of the CuO-doped SnO2-CoO-Sb2O3 system (12 V/mm, similar to TiO2), is a consequence of coarse-grained microstructure. This varistor had a suitable surge withstand capability as well. The colossal... 

This research focused on making novel low-voltage SnO2 varistors by CuO addition on conventional high-voltage SnO2 varistors. Moreover, the withstand surge capability of samples was studied. The results showed that CuO addition enhances grain growth of SnO2 and coarse-grained SnO2 varistors with simple microstructures were acquired in 1 mol% CuO-doped sample. This coarse-grained SnO2 varistor presented a high nonlinear coefficient (23) and low leakage current density (23 µA/cm2) with low breakdown field value of 0.6 kV/cm. Despite the large grain size, the low residual voltage ratio (2.3) was obtained for this sample compared to the CuO-free sample. The decrease in grain electric resistivity... 

In the present work, the effect of graphene oxide (GO) nanosheets on the antibacterial activity of CuO nanowire arrays under visible light irradiation is shown. A combined thermal oxidation/electrophoretic deposition technique was employed to prepare three-dimensional networks of graphene oxide nanosheets hybridized with vertically aligned CuO nanowires. With the help of standard antibacterial assays and X-ray photoelectron spectroscopy, it is shown that the light-activated antibacterial response of the hybrid material against gram-negative Escherichia coli is significantly improved as the oxide functional groups of the GO nanosheets are reduced. In order to explore the physicochemical... 

YBaCu2O5 compound as one of the possible microstructures of Y3Ba5Cu8O19 has been synthesized. The X-ray diffraction analysis of this compound indicates that its formation is accompanied with the formation of YBa2Cu3O7-δ. The observed superconductivity around ∼92 K supports this. So, it seems that YBa2Cu3O7-δ is responsible for the observed superconductivity in YBaCu2O5, and this phase is not an independent superconducting phase. Consequently, the overall effect of the YBaCu2O5 formation during the Y3Ba5Cu8O19 fabrication process could be a reduction in Tc. © 2018 Elsevier B.V  

An efficient synthesis of tetrahydrobenzofurans is carried out in one pot through the reaction of 1,3-diketone and phenacyl bromides compound using a heterogeneous basic nano particles copper oxide catalyst. The protocol offers advantages in terms of higher yields, short reaction times, and mild reaction conditions, with reusability of the catalyst. © 2009 Elsevier B.V. All rights reserved  

Up to now, attempts for developing coarse-grained SnO2-based varistors which exhibit high nonlinearity property at lower voltage have become a challenge without any prominent result because of its unknown grain growth mechanism. In this study, the effect of CuO addition to SnO2-based varistors as a grain growth enhancer additive on microstructural development, grain growth kinetics, and electrical properties was investigated. The characterization of grain growth kinetics showed that CuO addition encouraged grain growth and enhanced the grains size as it could be seen in the activation energy which decreased from 594 kJ/mol to 364 kJ/mol. In the samples with a low amount of CuO, the solute... 

Amine-functionalized MIL-101(Cr) has been synthesized by hydrothermal (MNH2) and post-synthetic modification (MNH2-p) approaches. Pd/MNH2 and Pd/MNH2-p have been tested in CO oxidation reaction as a gas phase reaction to clarify the difference between two synthesis approaches. Their performance has also been compared with that of Pd supported on MIL as a common MOF and CuBTC as a commercial one. The results show the significant difference between Pd/MNH2-p and Pd/MNH2, where CO conversion of 100% was not observed for Pd/MNH2-p, whereas Pd/MNH2 outperformed the others and exhibited the high reaction rate thanks to the active sites created by amorphization during the reduction process because... 

Natural convection heat transfer in a concentric horizontal annulus with annular fins is numerically studied. Due to the low thermal conductivity of water, CuO-water and Al2O3-water nanofluids were used as heat transfer fluids. The effect of three different parameters, including fin spacing, fin eccentricity, and fin thickness at different fin diameters and Rayleigh number range of 104 to 9 (Formula presented.) 105, were studied. The obtained results revealed that Al2O3-water nanofluid has the highest heat transfer rate. The calculated heat transfer rates for Al2O3-water nanofluid for Rayleigh numbers of 9 (Formula presented.) 105, 105, and 104 were respectively up to 12.1%, 26.2%, and 31.6%... 

A three-dimensional electrode based on porous Cu2O-Cu1.8S nanowires is prepared by means of a facile fabrication process. In this electrode, nanowires are decorated with Cu1.8S polyhedral nanostructures on the top, which are directly grown on a copper foam, thereby eliminating the need for a polymer binder. As an electrochemical electrode, it exhibits an extrinsic pseudocapacitive charge storage mechanism, which is different from that of battery-like Cu2O-CuO and Cu(OH)2 electrodes. The areal and volumetric capacitances of the Cu2O-Cu1.8S electrode can reach 2.6 F cm-2 and ∼200 F cm-3, respectively, at 2 mA cm-2, which are much higher than those obtained using copper(i, ii) oxide and... 

This study, for the first time, reports the synthesis of CuO- and Cu2O nanoparticles (NPs) using the Salvia hispanica extract by a high-gravity technique. The original green synthesis procedure led to the formation of nanoparticles with promising catalytic and biological properties. The synthesized nanoparticles were fully characterized and their catalytic activity was evaluated through a typical Azide-Alkyne Cycloaddition (AAC) reaction. The potential antibacterial activity against gram positive (S. aureus) and gram negative (E. coli) bacteria were investigated. It was shown that the antibacterial properties were independent of the NP morphology as well as of the texture of the synthesis... 

Operation of solid oxide fuel/electrolysis cells (SOFC/SOEC) at high temperatures (T > 850 °C) is accompanied by degradation phenomena, which severely affect the operational lifetime of the cell. Degradation processes are expected to occur slower at low temperatures. However, significant reduction in electrocatalytic activity of the oxygen electrode, is one of the major challenges in decreasing the operating temperature down to 500 °C-650 °C. Recently, Pr6O11 infiltrated Ce0.9Gd0.1O2 (CGO) based electrodes have been proposed to realize high electrochemical performance at intermediate temperature. In this study, Pr-oxide has been infiltrated into a well performing sub-micro... 

An investigation has been carried out on the effects of praseodymium doping in Sm3−xPrxBa5Cu8O19 for different values of x. Results indicate that the transition temperature reduces almost linearly with x. Based on the Abrikosov–Gor’kov pair-breaking theory, it has been concluded that the exchange interaction constant is large (Jex = 110 meV) in the Sm3Ba5Cu8O19 compound. In addition, it seems that the hybridization of Pr4f states with O2p–Cu3d states has an important role in the depression of transition temperature of Sm3−xPrxBa5Cu8O19 for the Pr content < 10%. However, for the higher values of Pr, the two observed plateaus at the transition temperatures of ~ 60 K and ~ 17 K, respectively,... 

A titanium dioxide nanotube (TNT) and CuO-doped TNT (TNT-CuO) were synthesized using a hydrothermal method and incorporated into carrageenan-based films. The SEM results confirmed the formation of uniform nanocomposite films. The addition of nanoparticles imparted UV-blocking properties to the carrageenan film and increased the mechanical strength, surface hydrophobicity, and water vapor barrier properties. The modified TiO2 (TNT and TNT-CuO)-incorporated carrageenan films showed significantly higher antibacterial activity than the TiO2-added film under visible light. Bananas packaged with the neat carrageenan and TiO2-added films were degraded considerably after 12 days of storage at 20 °C.... 

Titanium nanotubes (TNTs) were prepared using TiO2 and decorated with CuO and Cu2O to have photocatalytic efficiency under visible light. TNTs decorated with copper oxides (TNT-CuO and TNT-Cu2O) were confirmed by the elemental mapping and XPS results. Unlike TNT and TiO2, TNT-CuO and TNT-Cu2O showed higher photocatalytic activity, such as antimicrobial and ethylene scavenging activities under visible light. Between the two types of copper oxide-decorated TNTs, TNT-Cu2O showed photocatalytic activity higher than that of TNT-CuO. The ethylene scavenging activity of TNT-Cu2O was about 40% higher than that of TNTs and TNT-CuO. The photocatalytic activity of titanium-based nanoparticles was... 

Various methods are devised to capture renewable energy or waste heat from different sectors, where among all, waste heat capturing from the generator of a wind turbine through the cooling process for freshwater and cooling production is paid less attention in Iran, in spite of the fact that many wind farms in Iran are in hot and humid regions and the residents nearby the farms desperately need freshwater and cooling load. To surmount this problem, waste heat extraction from a wind turbine (Enercon 70 Model) for freshwater and cooling production is proposed in this study. Instead of dissipating this thermal energy of the wind turbine into the environment, it can be used for freshwater and... 

The growth of harmful microorganisms is a severe threat to human life. Nowadays, it is necessary to prepare antimicrobials materials with high biocompatibility properties. Hence, the use of nanomaterials and their nanocomposites has been proposed as a suitable way to obtain safe and potent antibacterial materials. Recently, several studies have been conducted on the antibacterial properties of metal oxide and graphene oxide (GO) nanomaterials individually. This study investigated the synergistic effect of GO and copper oxide (CuO) as a nanocomposite. CuO-GO nanocomposite containing 5%, 15%, 25%, 50%, and 75% of GO were synthesized to study antibacterial properties. X-ray diffraction (XRD)... 

Natural convection heat transfer in a concentric horizontal annulus with annular fins is numerically studied. Due to the low thermal conductivity of water, CuO-water and Al2O3-water nanofluids were used as heat transfer fluids. The effect of three different parameters, including fin spacing, fin eccentricity, and fin thickness at different fin diameters and Rayleigh number range of 104 to 9 (Formula presented.) 105, were studied. The obtained results revealed that Al2O3-water nanofluid has the highest heat transfer rate. The calculated heat transfer rates for Al2O3-water nanofluid for Rayleigh numbers of 9 (Formula presented.) 105, 105, and 104 were respectively up to 12.1%, 26.2%, and 31.6%... 

This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been retracted at the request of the Editor-in-Chief. Concern has been raised about the identity of the author “David Ross” as the listed institution has denied the affiliation of a person with this name. Further inquiry revealed that the names of the co-authors were added to the revised version of the article without notifying the handling Editor, which is contrary to the journal policy on changes to authorship. Also, the co-authors were not able to provide a reasonable description of their contribution to the article.... 

The bond valence sum method has been developed to high pressures considering B0(p) for calculating the valences of atoms. This approach has the advantages of finding a universal B0(P) for all the atoms -at least in YBCO, ability to evaluate the valency of each atom, and charge neutrality requirement of the unit cell. As a result, a new structural refinement has led to a more exact structural detail. The position of apical oxygen is found to be specially crucial for hole distribution between the superconducting CuO2 planes and Cu-O charge reservoir chains. Under pressure, the hole concentration in CuO2 planes increases, but in the Cu-O chains decreases, consistent with the pressure induced...