Sharif Digital Repository

The influences of cupric oxide layer thickness, cuprous oxide particles, and pores on mechanical properties and microstructure of alumina-copper eutectic bond have been investigated. The furnace atmosphere in the first stage was argon gas with 2 × 10-6 atm oxygen partial pressure. In the second stage, the furnace atmosphere was same as the first stage unless that in cooling between 900-1000 °C, the hydrogen gas was purged in furnace atmosphere. Finally, in the last stage a vacuum furnace with 5 × 10 -8 atm pressure was chosen for bonding procedure. Peel strength of first stage specimens shows that cupric oxide layer with 320 ± 25 nm thick generates the maximum peel strength (13.1 ± 0.3... 

In this study, both CuO nanoparticles and ZnO nanorods were anchored on thermally-exfoliated g-C3N4 nanosheets (denoted as CZ@T-GCN) via isoelectric point-mediated annealing process as a novel nano-photocatalyst towards degradation of amoxicillin (AMOX). The features of prepared materials were characterized using BET, UV–vis DRS, XRD, FT-IR, XPS, FE-SEM, TEM, EIS and transient photocurrent techniques. These analyses demonstrated the successful formation of heterojunctions between components of CZ@T-GCN nanocomposite, which reflected in significantly increased electron-hole separation and enhanced degradation of AMOX as compared with pure substances. The investigation of influential operative... 

We report on the response of a monolithic high Tc transition-edge bolometer to about 3 mmWave for the first time. The detector structure consisting of 400-nm YBa2Cu3O7-x(YBCO) film on buffered yttria stabilized zirconia substrate without any coupled antenna, shows bolometric type responsivity to the 3-mmWave radiation at its transition temperature. The YBCO thin film Ce0.9La0.1O2 buffer layer are both fabricated by the metal-organic deposition method. The meander line pattern of the bolometer is designed for obtaining maximum absorption and responsivity possible when the polarized radiation of the source is aligned with the pattern. Meander lines are 50 micrometers wide and 1.5-mm long. We... 

The cost-effective, robust, and efficient electrocatalysts for photoelectrochemical (PEC) water-splitting has been extensively studied over the past decade to address a solution for the energy crisis. The interesting physicochemical properties of CuO have introduced this promising photocathodic material among the few photocatalysts with a narrow bandgap. This photocatalyst has a high activity for the PEC hydrogen evolution reaction (HER) under simulated sunlight irradiation. Here, the recent advancements of CuO-based photoelectrodes, including undoped CuO, doped CuO, and CuO composites, in the PEC water-splitting field, are comprehensively studied. Moreover, the synthesis methods,... 

Hybrid nanofluids possess better mechanical resistance, physical strength, chemical stability, thermal conductivity and so forth as compared to individual nanoliquids. Our approach in the present work is to offer a novel study involving MHD flow of hybrid nanoparticles with viscous dissipation effect through a porous medium past a stretching surface. A powerful tool of similarity transformation is utilized to transmute the governing flow model PDEs into ordinary ones. The entire system of nonlinear coupled differential equations along with boundary conditions is tackled numerically by means of Successive over Relaxation (SOR) technique. Two distinctive fluids, named Al2O3-Cu/water (hybrid... 

Hybrid nanofluids possess better mechanical resistance, physical strength, chemical stability, thermal conductivity and so forth as compared to individual nanoliquids. Our approach in the present work is to offer a novel study involving MHD flow of hybrid nanoparticles with viscous dissipation effect through a porous medium past a stretching surface. A powerful tool of similarity transformation is utilized to transmute the governing flow model PDEs into ordinary ones. The entire system of nonlinear coupled differential equations along with boundary conditions is tackled numerically by means of Successive over Relaxation (SOR) technique. Two distinctive fluids, named Al2O3-Cu/water (hybrid... 

The growth of harmful microorganisms is a severe threat to human life. Nowadays, it is necessary to prepare antimicrobials materials with high biocompatibility properties. Hence, the use of nanomaterials and their nanocomposites has been proposed as a suitable way to obtain safe and potent antibacterial materials. Recently, several studies have been conducted on the antibacterial properties of metal oxide and graphene oxide (GO) nanomaterials individually. This study investigated the synergistic effect of GO and copper oxide (CuO) as a nanocomposite. CuO-GO nanocomposite containing 5%, 15%, 25%, 50%, and 75% of GO were synthesized to study antibacterial properties. X-ray diffraction (XRD)... 

Improving the sensitivity and the time response of the superconducting transition edge detectors as one of the most promising technologies for millimeter and sub-millimeter wavelength radiation power detection is essential. Having an accurate 3D model for these detectors enables us to design faster detectors with higher sensitivity and detectivity. In this paper, we report on a 3-dimensional finite element model of a current biased superconducting YBa2Cu3O7-x (YBCO) transition-edge detector fabricated by a low-cost Metal-Organic deposition method. The obtained simulation results are in good agreement with the measured response of the detectors. Also, as the simulation results suggest,... 

TiO2 nanotubes (TNTs) were synthesized hydrothermally and modified by Cu2O using a sol-gel method to provide photocatalytic activity in visible light. Cellulose nanofiber (CNF)-based films were prepared by adding TiO2, TNTs, and Cu2O-modified TNT (TNT-Cu2O). The TiO2-based nanoparticles (TiO2, TNTs, and TNT-Cu2O) were uniformly distributed in the base polymer to make compatible and flexible films. The incorporation of nanoparticles significantly enhanced the UV-shielding properties of the film while slightly decreasing the transparency. Incorporating nanofillers improved the film's mechanical and water resistance properties depending on the nanoparticle type. The TNT-Cu2O-added CNF film... 

Recently, numerous studies have focused on simulation and optimisation of combined cooling, heat, and power (CCHP) systems. This research, from a different perspective, aims to conduct a comprehensive review of the studies performed in the field of solar, geothermal or combined sources, and subsequently analysing the multi-objective evolutionary algorithms to identify the most efficient situation, which satisfy researchers' needs in order to attain a better performance in their ongoing or future research projects. It is worth noting that multi-objective optimisation in these cycles is based on optimising a thermodynamic term (exergy efficiency, thermal efficiency, etc.) and an economic term... 

Monometallic and bimetallic supported metal oxides catalysts on γ-alumina were prepared by heterogeneous deposition-precipitation. The γ-alumina used as a support was synthesized by the sol-gel and the co-precipitation methods. Supports and catalysts were characterized by Brunauer–Emmett–Teller (BET) surface area, X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The performance of the prepared catalysts was studied for total oxidation of toluene in air at different relative humidity and oxidation temperatures. Efficiency of bimetallic catalysts for deep oxidation of toluene was... 

Introduction: In recent years, the use of cost-effective, multifunctional, environmentally friendly and simple prepared nanomaterials/nanoparticles have been emerged considerably. In this manner, different synthesizing methods were reported and optimized, but there is still lack of a comprehensive method with multifunctional properties. Materials and Methods: In this study, we aim to synthesis the copper oxide nanoparticles using Achillea millefolium leaf extracts for the first time. Catalytic activity was investigated by in situ azide alkyne cycloaddition click and also A3 coupling reaction, and optimized in terms of temperature, solvent, and time of the reaction. Furthermore, the... 

We present the results of a bolometric transition-edge sensor made of a high-Tc superconductor YBCO thin film prepared by fluorine-free metal-organic deposition. The structure of the films was characterized by X-ray diffraction and scanning electron microscopy, and the superconducting properties were determined by R-T measurements. The applicability of the resulting film as an infrared sensor is reported here. The optical response in the range of near infrared and the noise characteristics of the patterned bolometer are measured and analyzed. The dependence of device sensitivity on the bias current and modulation frequency is also investigated. As it is presented in this paper, the results... 

Copper and cobalt oxides supported on almond shell derived activated carbon (AC) with different loadings were synthesized by sequential and co-deposition-precipitation methods leading to Cu(shell)/Co(core)/AC, Co(shell)/Cu(core)/AC and Cu-Co(mixed)/AC catalysts that were subsequently used for catalytic oxidation of gaseous mixtures of toluene and cyclohexane in air in a tubular flow reactor. The catalysts and the support were characterized by Boehm test, Brunauer-Emmett-Teller (BET) surface area, X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy... 

We report on the results of a YBa2Cu3O7−x (YBCO) superconductive transition edge bolometer (TEB) fabricated on a Ce0.9La0.1O2−7 (CLO) buffered single crystalline yttria-stabilized zirconia (YSZ) substrate. Metal organic deposition was used for the fabrication of both the YBCO thin film as well as CLO buffer layer, while standard photolithography was applied for TEB preparation. YBCO thin film properties were analysed using scanning electron microscopy (SEM), X-ray diffraction (XRD), AC susceptibility and resistance versus temperature measurements. Optical response of the TEB in terms of voltage amplitude and phase was analysed and measured through four-probe technique in a liquid nitrogen... 

An active noise cancellation method is proposed for superconducting quantum interference devices (SQUID)-based magnetocardiography systems working out of magnetically shielded rooms. Using YBCO high-Tc rf-SQUID magnetometers as magnetic field sensors, an active shielding system was implemented based on this method. This method incorporates two different shielding frequency regimes of operation simultaneously. This is because the unwanted background magnetic field signals range from very low frequencies up to high frequencies with a wide range of amplitudes at the upper and lower frequency spectra. Therefore, the shielding system is designed in a bistage configuration, and each stage covers... 

We report on the results of a YBa2Cu3O7−x (YBCO) superconductive transition edge bolometer (TEB) fabricated on a Ce0.9La0.1O2−7 (CLO) buffered single crystalline yttria-stabilized zirconia (YSZ) substrate. Metal organic deposition was used for the fabrication of both the YBCO thin film as well as CLO buffer layer, while standard photolithography was applied for TEB preparation. YBCO thin film properties were analysed using scanning electron microscopy (SEM), X-ray diffraction (XRD), AC susceptibility and resistance versus temperature measurements. Optical response of the TEB in terms of voltage amplitude and phase was analysed and measured through four-probe technique in a liquid nitrogen... 

ZnO/CuO nanofibers, with different CuO concentrations, were fabricated by one-step electrospinning of the polymer precursor and annealing in air. Scanning electron microscopy (SEM) showed smooth and beadless morphology for the synthesized nanofibers, while X-ray diffraction (XRD) analysis revealed formation of hexagonal and monoclinic crystalline structure phases for ZnO and CuO nanofibers, respectively. X-ray photoelectron spectroscopy (XPS) analysis confirmed the presence of CuO on the surface of ZnO nanofibers. For further confirming the formation of chemical bonds, Fourier transform infrared (FT-IR) spectroscopy was employed. The effect of Cu contents in the overall electronic band... 

Cu@Cu2O core-shell nanoparticles on a-C : H thin films are prepared by co-deposition of RF-sputtering and RF-PECVD. Samples with different copper concentrations are grown. The copper content of films increases with reduction in initial pressure and rises with increasing RF power. When the Cu/C ratio reaches 0.5, the surface plasmon resonance (SPR) peak that is a signature of the formation of Cu nanoparticles appears in visible spectra of these films. X-ray photoelectron spectroscopy (XPS) characterization indicates that the surface of the copper nanoparticles oxidizes when they are exposed to air. The results are indicative that the shell of the nanoparticle is mainly the Cu 2O phase that is... 

We present a new approach for analytical modeling and calculating the response of high-Tc superconductive transition edge sensors in a wide range of modulation frequencies for different configurations of the film patterns. The method used here is based on solving the heat transfer differential equation for two different time varying heat sources, which are related to the absorbed radiated power. The used method employs two-dimensional boundary conditions for describing meander-line patterned devices. The results from the applied method are in better agreement with those obtained from the frequency response measurements of the characterized samples, than the previously developed models. In...