Sharif Digital Repository

Filtrate and solid invasion from drilling fluids are two key sources of formation damage, and can result in formation permeability impairment. Typically, spurt invasion of mud solids causes the evolution of an external mud cake which tends to reduce further solids and filtrate influx. However, uncontrolled spurt and filtrate invasion are detrimental because they reduce the permeability of the formation. Mud composition, formation rock's permeability and porosity, and temperature can influence both spurt and filtrate invasion. The sizes of mud solids relative to the average pore size of a rock are also important in predicting the extent of mud invasion and permeability impairment. In this... 

Cutting transport is an important goal in drilling operation especially in horizontal and deviated wells since it can cause problems such as stuck pipe, circulation loss and high torque and drag. To this end, this article focused on the affecting parameters on the cutting transport by computational fluid dynamic (CFD) modeling and real operational data. The effect of drilling fluid and cutting density on the pressure drop, deposit ratio and string stress on the cutting transport has been investigated. A systematic validation study is presented by comparing the simulation results against published experimental database. The results showed that by increasing two times of drilling fluid... 

To improve the thermal stability of starch in water-based drilling fluid, monoethanolamine (MEA) was added, and the effect was investigated by laboratory experiment. The experimental results show that the addition of monoethanolamine (MEA) increases the apparent viscosity, plastic viscosity, dynamic shear force, and static shear force of the drilling fluid, and reduces the filtration rate of drilling fluid and thickness of mud cake apparently. By creating hydrogen bonds with starch polymer, the monoethanolamine can prevent hydrolysis of starch at high temperature. Starch, as a natural polymer, is able to improve the rheological properties and reduce filtration of drilling fluid, but it works... 

In drilling industry, barite particles settling and barite sag as a major problem can potentially impose significant operational issues. Static conditions, in which well undergoes an extended shut-in period, could occur during different drilling and completion operations such fishing operation, tripping, and logging. Despite its importance, such phenomenon is not well understood yet. To avoid issues related to barite settlement and barite sag, a good understanding of the impact of different drilling parameters on barite settlement and sag phenomenon is required. Recently, the mathematical formulation and modeling of settlement and sag processes have gained more attention. In order to better... 

To improve the thermal stability of starch in water-based drilling fluid, monoethanolamine (MEA) was added, and the effect was investigated by laboratory experiment. The experimental results show that the addition of monoethanolamine (MEA) increases the apparent viscosity, plastic viscosity, dynamic shear force, and static shear force of the drilling fluid, and reduces the filtration rate of drilling fluid and thickness of mud cake apparently. By creating hydrogen bonds with starch polymer, the monoethanolamine can prevent hydrolysis of starch at high temperature. Starch, as a natural polymer, is able to improve the rheological properties and reduce filtration of drilling fluid, but it works... 

Recently, colloidal gas aphron (CGA) fluids technology has been employed to drill depleted oil and gas reservoirs. Almost all reported experience on CGA fluids were conducted at ambient conditions, and little attention has been paid on the behavior of CGAs at high pressures which is more close to real conditions. In this study, high pressure experiments were conducted by using High Pressure Microscope cell to visualize/monitor the behavior of CGAs at elevated pressures. Single bubble behavior and bubble size distribution (BSD) of CGAs were investigated under different scenarios of pressure change. Results of experiments revealed that BSD of CGAs is controlled by the path of pressure changes,... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

Sustainable technologies are the main concerns of the 21st century modified oilfield industries. The insufficiency of conventional drilling fluid formulations with a combination of hardly degradable hazardous chemicals as additives raise the demands of field-applicable innovative and environmentally friendly methods. Pistachio Shell discards as degradable wastes, which can intellectually apply in drilling fluid formulation. The experimental oilfield investigations of utilizing pistachio shell powder prove the significant enhancement of rheological properties, reduction of fluid loss and mud cake thickness in both API (Low Pressure —Low Temperature) and High Pressure—High Temperature (HPHT)... 

Due to the weak performance of commercially affordable natural and synthetic polymeric thickeners in high temperatures and salinity, they fail to use in many applications especially in saline conditions with high temperatures. In this work, a new salt and temperature resistance acrylamide/styrene/maleic anhydride terpolymer (PASM-t) with self-associative properties was synthesized via a one-step inverse emulsion polymerization and its applicability as a rheological modifier and thickener was investigated. The characteristics of synthesized PASM-t (s-PASM-t) and its aqueous solutions were investigated using FT-IR, FE-SEM, GPC and rheometric mechanical spectrometry (RMS) analyses. The... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

Deep wells suffer from the instability and disintegration of natural polymers and other commonly used additives under high pressure and high temperature condition. As a result, serious problems such as hydraulic loss, stuck pipe, and high torque and drag are expected to take place which leads to a dramatic increase in cost and time. This study presents the functionality of a novel synthetic based acrylamide-styrene copolymer (SBASC) as a supersede additive for water-based drilling mud. First, the SBASC was synthesized using an emulsion polymerization process and its particle morphological and polymer chain structural properties were determined by Field Emission Scanning Electron Microscopy... 

One of the most prevalent problems in drilling industry is lost circulation which causes intense increase in drilling expenditure as well as operational obstacles such as well instability and blowout. The aim of this research is to develop smart systems for estimating amount of lost circulation making able to use appropriate prevention and remediation methods. To obtain this aim, a large data set were collected from 61 recently drilled wells in Marun oil field in Iran to be used for developing relevant models. After that, using the extracted data set consisting of 1900 data subset, intelligent prediction models including decision tree (DT), adaptive neuro-fuzzy inference systems (ANFIS),... 

Recently, Colloidal Gas Aphron (CGA) based fluids have been introduced to further develop depleted hydrocarbon reservoirs. This fluid system has been employed in an attempt to control drilling fluid invasion and, thus, reducing formation damage occurred during drilling operations. Understanding the mechanisms of fluid invasion control is of great importance for successful design and application of CGA-based fluids in drilling operations. Although fluid flow of conventional foams has been studied extensively in the available literature, little attention has been paid to CGA fluids flow, especially in heterogeneous fractured porous media. Here, an experimental study was conducted to achieve... 

Conventional additives used in drilling fluid may have detrimental short- and long-term impacts on the surrounding environment. The employment of biodegradable green material in drilling fluid as alternative additives will eliminate these harmful impacts. In this study, acorn shell powder is proposed as a novel biodegradable additive for application in drilling fluid. First, the acorn shell powder was prepared and then characterized in terms of chemical structure, particle size, and morphology. The acorn shell powder, with four different concentrations, was then introduced into a water-based fluid; its functionality in the fluid system was evaluated with respect to rheological and filtration... 

In this study, effects of dried saffron purple petals (SPP) powder were examined on the rheological, fluid loss, and corrosion inhibition properties of bentonite-based drilling fluids. Drilling fluids containing different amounts of the SPP powder were prepared and their rheological behavior was investigated via the rotary viscometry and rheometric mechanical spectroscopy (RMS). Rotary viscometer results were fitted with Power-law, Bingham plastic, and Herschel-Bulkley models and the obtained data were compared with that of the base mud. All models fitted the rotary viscometer data with the determination coefficients higher than 0.93. The presence of 3 wt% of the SSP in the fluid... 

Despite the fact that hydrophobic nanosilica can improve the stability of water/oil emulsion, there exist controversies pertaining to its influence on oil-based drilling fluid rheological behavior and the subsequent formation damage. The present study addresses the above using a surface modified nanosilica, where the particles were functionalized with different silane-based groups to alter their hydrophilicity: 3-glycidoxypropyl-triethoxy silane (GPTS) and combined GPTS and propyl silane (PGPTS). The NPs were characterized through FTIR analysis, particle size, and zeta-potential measurements followed by flow behavior experiments, core-scale mud flow tests, Computed Tomography (CT) scanning... 

Drilling fluid is a complex fluid, including base fluid and other materials, carrying out the vital functions during drilling operation such as cutting transport and controlling formation pressure. In order to optimize performance of a drilling process, a reliable rheological model is required in the computation of fluid flow dynamics. Time-independent Generalized Newtonian formulation are the most common models for describing the rheological behavior of drilling fluids due to its simplicity and ease of use, in spite the fact that they are not able to predict the normal stresses and could not consider effects of active components on the rheological behavior of the drilling fluid and also... 

Drilling fluids consist of several components with different physical and structural form which can be assumed as complex fluids. Optimum performance of drilling process could be obtained through the dynamic fluid computation which requires a reliable mathematical model capable to predict transient and steady state rheological behavior of drilling fluid. Generalized Newtonian formulations are the most popular models for drilling fluids due to their simplicity in spite of their inabilities to predict transient and elastic behavior of such fluids. In this paper, we have developed a mathematical model to predict transient and steady state rheological behavior of the complex fluids on the scale... 

The formation damage (FD) caused by the invasion of drilling fluid severely affects reservoir performance during production. Most of the published research studies which address this type of FD have been carried out at the core or field scale. Thus, the main aim of the paper is to investigate the pore-scale mechanisms of FD induced by drilling fluids and their control with silica nanoparticles (NPs) using a microfluidic approach. The proper identification of the mechanisms of FD can lead to the proper selection of NP type and concentration as well as a suitable method to remediate FD. The micromodel was designed in a way to closely simulate the cross-flow at the wellbore surface. A... 

Supercritical fluid extraction is a new technology that could be effectively used to treat oil-contaminated drill cuttings generated during drilling for oil and gas. In this work, the solubility of oil-contaminated drill cuttings in supercritical carbon dioxide is obtained by an experimental flow type apparatus. The solubility was measured at 200 bar pressure, over a temperature range of 55-79.5°C. The measured solubility and experimental data for oil in drill cuttings were correlated using the PC-SAFT, PR and SRK EOS models, without any adjustable parameters. Average absolute derivations of less than 15.1 %, 98.7 %, and 99.3 % are achieved between predicted and experimental values for the...