Sharif Digital Repository

Vertical copper oxide nanoflakes were synthesized on a Cu foil through oxidation in alkaline conditions. X-ray photoelectron spectroscopy showed that after exposing the nanoflakes to an Escherichia coli bacterial suspension, the outermost surface of the nanoflakes was chemically reduced through the glycolysis process of the bacteria. Current-voltage (I-V) characteristics of the nanoflakes (measured perpendicular to surface of the Cu foil by using conductive atomic force microscopy) indicated that electrical resistivity of the nanoflakes increased about one order of magnitude after exposure to the bacterial suspension. The nanoflakes reduced by the bacterial suspension could also be... 

In this research, constrained groove pressing (CGP) technique is used for imposing severe plastic deformation (SPD) on the low carbon steel sheets. Using transmission electron microscopy (TEM), X-ray diffraction (XRD) and optical microscopy, the microstructural characteristics of produced sheets are investigated. The results show that CGP process can effectively refine the coarse-grained structure to an ultrafine grain range. Dislocation densities of the ultrafine grained low carbon steel sheets are quantitatively calculated and it is found that the CGP can effectively enhance the dislocation density of the sheets. Measurements of their electrical resistivity values show that microstructure... 

Marvelous bending/straightening effects of two-way shape memory alloy (TWSMA) help their employment in design and manufacturing of new medical appliances. Constrained ageing with bending load scheme can induce two-way shape memory effect (TWSME). Scanning electron microscopic (SEM) analysis, electrical resistivity measurement (ERM) and differential scanning calorimetry (DSC) are employed to determine the property change due to flat strip constrained aging. Results show that flat-annealing prior to the aging shifts NiTi transformations temperatures to higher values. Superelastic behavior of the as-received/flat- annealed/aged samples with more adequate transition temperatures due to... 

The aim of the present study was to investigate the effect of pyrogenic nanosilica with different specific surfaces areas (200 and 380 m2/g) on mechanical properties of fiber-reinforced high-performance concrete (FRHPC) produced with two different types of fibers including steel and polypropylene fibers. Accordingly, different mechanical tests (compressive, splitting tensile and flexural strengths) as well as electrical resistivity were performed at 7, 28, and 91 curing days. In addition, the modulus of rupture and flexural toughness of FRHPC prisms were calculated based on the flexural testing results. Also, scanning electron microscopy test (SEM) was conducted to evaluate the... 

In this paper, we introduce the sequential deposition method for enhancing the performance of nanocomposite counter electrodes (CEs) in quantum dot sensitized solar cells (QDSCs). Here, various CEs are made by the deposition of CuS, PbS, and CuS/PbS nanocomposite layers on an FTO (fluorine doped tin oxide) coated glass substrate by a simple successive ionic layer adsorption and reaction (SILAR) method. The result indicates that the efficiency of the cells with CuS/PbS CEs is enhanced by 2.65% compared with the bare CuS (0.99%) or PbS (1.47%) CEs. Also, no considerable improvement is observed for PbS/CuS CEs (1.09%), which indicates that the order of PbS and CuS deposition is critical for... 

Characterizing the electrical resistance of the formation rock is of great importance in, for example, interpreting the well log data, calculating the porosity, and water saturation for the formation rocks. The relation between the resistivity factor and porosity and also between the resistivity index and water saturation (Archie equation) in the formation rock uses the parameters, such as the cementation factor and saturation exponent. However, the direct application of Archie equation to carbonate rocks that are very heterogeneous and mostly oil-wet needs further investigation. In this experimental work, the effects of overburden pressure, temperature, and interfacial tension on the... 

Nonlinear vibration of a microbeam actuated by a suddenly applied voltage with considering the effect of voltage distribution on the beam due to electrical resistivity of beam is investigated. Homotopy perturbation method is implemented to solve the coupled nonlinear partial differential equations of motion. The vibration frequency variation and damping at various resistivities is studied. Considering resistivity, effect of applied voltage and beam length on the frequency shift and damping ratio is analyzed. Findings indicate there exists a jump in frequency shift and damping ratio at a critical resistivity. Variation of critical resistivity with respect to modulus of elasticity and beam... 

We present gas sensing property of carbon nanotubes (CNTs) polymethylmethacrylate (PMMA) composite as the active element for acetone vapour detection at room temperature. The polymeric films were formed by spin coating method on SiO2 substrates. Then they were activated by dropping the CNTs suspension in acetone on the PMMA films. The CNT/PMMA films were characterised by SEM, TEM and Raman spectroscopy. Variation of film's electrical resistance after exposure polar and non-polar gases is utilised as the principle of gas sensing. The experimental results showed that the samples present chemical selectivity and reversibility toward polar gases especially acetone vapour  

Multi-Walled Carbon nanotube (MWCNTs) films were obtained by Thermal Chemical Vapor Deposition method and coated by palladium sputtering process. Raman spectroscopy was used to study alteration in quality of the carbon nanotubes after the sputtering process. Fourier Transform Infra Red (FTIR) spectroscopy showed that hydrogenation process can reduce the C{double bond, long}O to C-O and also produce O-H bond. Furthermore, the electrical resistance measurement for Pd/MWNTs films was performed in a chamber with 1% hydrogen gas in a constant dry air flow. Hydrogen sensing behavior of the films was investigated at 50 °C. Pd/MWCNTs films presented an irreversible gas response to hydrogen in the... 

Solid oxide fuel cells (SOFCs) are rapidly becoming recognized as a new alternative to traditional energy conversion systems because of their high energy efficiency. From an ecological perspective, this environmentally friendly technology, which produces clean energy, is likely to be implemented more frequently in the future. However, the current SOFC technology still cannot meet the demands of commercial applications due to temperature constraints and high cost. To develop a marketable SOFC, suppliers have tended to reduce the operating temperatures by a few hundred degrees. The overall trend for SOFC materials is to reduce their service temperature of electrolyte. Meanwhile, it is... 

In this research, copper matrix composites reinforced with different amounts of titanium carbide particles were produced by mechanical milling and in-situ formation of reinforcements. Morphology and size of milled powders were inspected by scanning electron microscopy (SEM) several times during milling process. Changes in lattice parameter, crystallite size, lattice strain, dislocation density and Gibbs free energy changes (due to increasing in dislocation densities and grain boundaries) in different samples (with different TiC particles contents) were studied by X-Ray Diffraction technique with Cu-kα radiation and using Nelson-Riley method and Williamson-Hall equation. Microstructure of... 

The aim of this study was to evaluate the effects of applying low replacement ratios (0.75% and 1.50% of the binder weight) of nano-SiO2 particles with different specific surface areas (200 and 380 m2/g) on the properties of high-performance concrete (HPC). Mechanical (compressive and splitting tensile strengths), electrical resistivity, non-destructive (ultrasonic pulse velocity), and microstructural (mercury intrusion porosimetry, X-ray diffraction, and scanning electron microscopy) tests were conducted to investigate the macroscopic and microscopic effects of nano-SiO2 particles on HPC characteristics. The results indicated that the performance of nano-SiO2 particles significantly... 

The Cu-0.5Co/WC nano-composite coating was synthesized on CP-copper substrate using Direct Current (DC) electrodeposition method. In this work, it was tried to increase the hardness of surface without considerable degradation of copper's particular physical properties such as electrical conductivity. The effect of current density on microstructural homogeneity, hardness, fracture toughness, and electrochemical behavior of coating was investigated. The copper plates with the purity of 99.99% were used as electrodes. The electrolyte consists of tungsten carbide particles (30 g/l), copper sulfate (200 g/l), sulfuric acid (50 g/l), cobalt sulfate (50 g/l), and Sodium Dodecyl Sulfate (SDS) (0.3... 

In this brief, a design technique for tapered distributed low-noise amplifiers (LNAs) is presented. A circuit model is developed for gain and noise analysis of a nonuniform distributed amplifier (DA). It is shown that by optimal tapering of gate and drain transmission lines and transistors, the tapered distributed LNA can provide lower broadband average noise figure (NF) compared to a uniform DA. A proof-of-concept integrated circuit is implemented using a 0.1-μm GaAs pHEMT process. The amplifier provides average gain of 15.2 dB and 3-dB bandwidth of 43.3 GHz. The average NF of 2.3 dB and minimum NF of 2.0 dB are achieved over 2–40 GHz. The chip consumes 55 mA current from a 2-V supply. IEEE... 

There are many engineering applications in which composite materials are required to satisfy two or more criteria regarding physical and mechanical properties. In this article, Al-matrix nanocomposites reinforced with different volume fractions of SiC nanoparticles (~ 50 nm; up to 6%) were processed by powder metallurgy (P/M) routes through mechanical milling and hot consolidation techniques. Microstructural studies showed that nano-metric Al2O3 particles with a size of ~ 20 nm and volume fraction of ~ 2% were formed and distributed in the metal matrix, owing to the surface oxides breaking. Microstructural analysis also revealed that the size of cellular structure and the density of... 

The aim of the present study is to investigate the effects of using hybrid fibers on rheological, mechanical and durability properties of the high-strength self-consolidating concrete (SCC). For this purpose, two types of fibers including hooked-end steel fibers and polypropylene fibers were used. In this study, a total of eleven mixtures were used: one as a control mix, one containing 0.5% steel fibers, four containing 0.5% hybrid fibers (steel and polypropylene), one containing 1.0% steel fibers and the four containing 1.0% hybrid fibers (steel and polypropylene). For investigating the rheological properties, slump flow, J-ring and V-funnel tests were performed. Mechanical properties were... 

A high-power short-pulse generator based on the diode step recovery phenomenon and high repetition rate discharges in a two-electrode gas discharge tube is presented. The proposed circuit is simple and low cost and driven by a low-power source. A full analysis of this generator is presented which, considering the nonlinear behavior of the gas tube, predicts the waveform of the output pulse. The proposed method has been shown to work properly by implementation of a kW-range prototype. Experimental measurements of the output pulse characteristics showed a rise time of 3.5 ns, with pulse repetition rate of 2.3 kHz for a 47-Ω load. The input peak power was 2.4 W, which translated to about... 

Copper matrix composites reinforced with TiO2particles are promising materials widely used as contact materials due to their excellent mechanical and physical properties such as good electrical and thermal conductivity and strength at high temperature. In this research, the novel contact material were prepared by in-situ oxidation of Cu-Ti pre alloyed powders. The morphology of milled powders and microstructure of nano-composite specimens were studied by SEM and TEM. To evaluate mechanical alloying progress of Cu and Ti powders mixture and internal oxidation after Cu2O addition, XRD analysis were carried out. The Physical and mechanical properties results of specimens indicate that the... 

Nonlinear transmission lines (NLTLs) are passive networks with the capability of modulating baseband pulses. These networks are used for generating RF pulses at high-power levels. NLTLs have a unique performance in high-power RF pulse generation among all the generators based on the solid-state technology. A high-power rectangular pulse is injected to the line, gradually evolved into an oscillatory pulse while propagating through the network, and finally, in the form of a high-power RF pulse, is delivered to the load. Properly terminating an NLTL, in order to transfer the maximum available RF power to the load, is an important problem. In this paper, an accurate analysis is presented, which...