Sharif Digital Repository

Spinal cord is a long, thin, tubular bundle of nervous tissue located in the vertebral column. Since the spinal cord is one of the most crucial pathways for information connecting of the central nervous system, it has to stay safe under any blunt impact loading, i.e., accident, punch, gunshot, burst, etc. Therefore, it is important to investigate the possible injuries that may occur in the vertebral column, especially the spinal cord, as a result of blunt loading. However, due to various experimental limitations, numerical modelling, specifically finite element (FE) models, has been beneficial in predicting the injury to the spinal cord. This study, thus, aimed at predicting the stresses and... 

Spinal fusion surgery is usually followed by accelerated degenerative changes in the unfused segments above and below the treated segment(s), i.e., adjacent segment disease (ASD). While a number of risk factors for ASD have been suggested, its exact pathogenesis remains to be identified. Finite element (FE) models are indispensable tools to investigate mechanical effects of fusion surgeries on post-fusion changes in the adjacent segment kinematics and kinetics. Existing modeling studies validate only their intact FE model against in vitro data and subsequently simulate post-fusion in vivo conditions. The present study provides a novel approach for the comprehensive validation of a lumbar... 

Due to their potential to recover strength and stiffness with a minimum impact on aerodynamic performance of a damaged structure, scarf repairs are boosted as a viable repair option for primary aero-structures. So far, most of the experimental and numerical studies have been limited to joint specimens and their equivalent 2 Dimensional models and a few number of studies attempted to examine the results using real scarf repair geometry. Suggestions previously made to justify the difference between scarf joint and scarf repair strength and possible solution to diminish the difference are challenged in current work. Here, it is tried to investigate the strengths and shortcomings of 2D scarf... 

In this paper, model-based and distrbance observer (DOB)-based control of needle in precautious applications are compared. In the model-based approach, the force acting on the needle is calculated by evaluating the finite element model (FEM) of the tissue with the tissue deformation. In DOB-based method, the force acting on the needle is considered as an external disturbance and it is estimated using position and velocity of the needle. In both approaches, the calculated/estimated force is used in a sliding mode control scheme to steer the needle to the target. A dynamics equation for the movement of the needle is proposed which includes the force applied by the tissue to the needle. The... 

A number of geometrically-detailed passive finite element (FE) models of the lumbar spine have been developed and validated under in vitro loading conditions. These models are devoid of muscles and thus cannot be directly used to simulate in vivo loading conditions acting on the lumbar joint structures or spinal implants. Gravity loads and muscle forces estimated by a trunk musculoskeletal (MS) model under twelve static activities were applied to a passive FE model of the L4-L5 segment to estimate load sharing among the joint structures (disc, ligaments, and facets) under simulated in vivo loading conditions. An equivalent follower (FL), that generates IDP equal to that generated by muscle... 

A number of geometrically-detailed passive finite element (FE) models of the lumbar spine have been developed and validated under in vitro loading conditions. These models are devoid of muscles and thus cannot be directly used to simulate in vivo loading conditions acting on the lumbar joint structures or spinal implants. Gravity loads and muscle forces estimated by a trunk musculoskeletal (MS) model under twelve static activities were applied to a passive FE model of the L4-L5 segment to estimate load sharing among the joint structures (disc, ligaments, and facets) under simulated in vivo loading conditions. An equivalent follower (FL), that generates IDP equal to that generated by muscle... 

Gold and copper thin films are widely used in microelectromechanical system (MEMS) and nanoelectromechanical system (NEMS) devices. Nanoindentation has been developed in mechanical characterization of thin films in recent years. Several researchers have examined the effect of surface roughness on nanoindentation results. It is proved that the surface roughness has great importance in nanoindentation of thin films. In this paper, the surface topography of thin films is simulated using the extracted data from the atomic force microscopy (AFM) images. Nanoindentation on a rough surface is simulated using a three-dimensional finite-element model. The results are compared with the results of... 

Different concepts for modelling of soil-foundation in complete dynamic interaction analysis for a 110-m height 70-m span arched structure on 180 piles were investigated in this paper. The modelling approaches consisted of a sophisticated procedure to account for soil compliance and foundation flexibility by defining frequency-dependent springs and dashpots; namely, flexible-impedance base model. The results of this model were compared with those of the conventional modelling procedures; namely, fixed base model and flexible base model by defining frequency-independent springs. In the flexible-impedance base model, the substructure approach was employed through finite element modelling. To... 

Thin-walled cylindrical steel silos are one of the key structures for storage of materials in many industries and agricultural sectors. They are susceptible to instability under wind pressure when they are empty or partially filled. This paper investigates numerically the wind buckling behavior of three sample steel silos with stepped walls composed of isotropic rolled shells. Wind load vertical and circumferential distributions were adopted from Eurocodes. Two proposed circumferential pressure distributions for an isolated silo and a silo in a group with a closed roof were taken into consideration. Moreover, the effect of additional inward pressure, proposed by Eurocode, on buckling... 

Thin-walled cylindrical steel silos are susceptible to instability under wind pressure when they are empty or only partially filled. This paper investigates numerically the wind buckling behavior of a real steel corrugated silo with 8.02 m diameter and 17.62 m height, strengthened by open-section vertical stiffeners. Accordingly, comprehensive 3D finite element models were used and detailed linear and non-linear buckling analyses were conducted. The effects of sinusoidal corrugated sheet profile dimensions on this issue were specially explored. Wind load vertical and circumferential distributions were adopted from Eurocode. Two proposed circumferential pressure distributions for an isolated... 

In this paper, a micro-polar continuum model is presented based on the Cosserat theory for 3D modeling of localization phenomena. Since the classical continuum model suffers from the pathological mesh-dependence in strain localization problem, the governing equations are regularized by adding the rotational degrees-of-freedom to conventional degrees-of-freedom. The fundamental relations in three-dimensional Cosserat continuum are presented and the internal length parameters are introduced in the elasto-plastic constitutive matrix to control the shear bandwidth. The mesh independency of Cosserat model in strain-softening problem is verified and the effect of internal parameters is... 

A new modification of constrained groove pressing (CGP) process named as constrained groove pressing-cross route (CGP-CR) was suggested for severe plastic deformation (SPD) of sheet form metals with great potential for fabricating high strength nanostructured sheets. This process is based on the conventional CGP process including some modifications. One pass of this process includes eight stages (four corrugation and four flattening) and involves 90° cross-rotation between each two stages. As a result of each CGP-CR pass, a strain magnitude of ∼2.32 is imparted to the sample. To simulate the process, finite element modeling (FEM) was carried out using three-dimensional finite element... 

This paper deals with the generalized coupled thermoelastic solution for disks with constant thickness. It is a sequel to the authors's previous work in which refined 1D Galerkin finite element models with 3D-like accuracies are developed for theories of coupled thermoelasticity. Use of the reduced models with low computational costs may be of interest in a laborious time history analysis of the dynamic problems. In this paper, the developed models are applied and evaluated for a 3D solution of the dynamic generalized coupled thermoelasticity problem in the disk subjected to thermal shock loads. Comparison of the obtained result with the results available in the literature verified the...