Sharif Digital Repository

In this article we investigate the impact of trade openness on labor force participation rate. We use tariff rate as the main indicator of trade openness and we employ the number of regional trade agreements of neighbouring countries to diminish the endogeneity of the tariff rate variable. The results of the article show that the correlation of tariff rate and participation rate is negative and significant. Moreover, this correlation is robust controling for different variables and using various regression specifications. 1 percentage point decrease in tariff rate is correlated with 2-3 percentage point increase in participation rate and this relationship attenuates in the medium-run  

Experimental determination of aircraft aerodynamic characteristics is of prim importance in evaluation of its trimability and stability requirements. One of the most common tools for experimental identification of aircraft is the wind tunnel equipped with aerodynamic force and moment balance system. Design and development of wind tunnel equipped with such system for measuring aerodynamic forces and moments can affect the accuracy and quality of identifying the aircraft dynamics. However, since procurement of such professional systems is very expensive, the primary goal of this project is focused on initial design of a tabletop wind tunnel with a force and moment balance system. In addition,... 

Nowadays, with progresses made in manufacturing technologies, it is possible to produce micro-scale products such as micro-electromechanical systems. Micro-motors are one type of these systems that can be used in such applications as power supply of electronic devices. To achieve a better performance, these systems must rotate at high rotational speeds (about one million revolutions per minute). At such a high rotational speed, vibrational analysis is highly crucial. The results of recent studies indicate the inability of classical theories of continuum mechanics to analyze the behavior of these micro systems. Therefore, in this research, the rotor of micro-motors are modeled using the... 

In decentralized Supply Chains, each member decides based on his own interests. Conflict of interests results in suboptimal decisions and poor performance for entire supply chains, as well seriously harms credibly information sharing across them. In this thesis, coordination of decisions in supply chains in the context of Capacity Procurement problem are studied in different situations in form of three models. In first model, a dyadic supply chain with stochastic demand and exogenous price is investigated by taking various costs into account. PARD and RCRS contracts are designed and proposed in order for coordination of decisions respectively in full and partial information updating... 

Nowdays, one of the most important concerns for scientists is increasing CO2 emmisions and global warming. To overcome this problem, a large number of studies have been carried out to improve energy system performance and reducing the overall energy consumption. One solution to this problem is using the superhydrophobic surfaces with contact angle larger than 150°.In this study, we try to reduce the pressure drop through the galvanized pipes. So, by reducing the pressure drop, power required for pumps can be reduced. To this end, two different coatings by silica nano-particles which were modified with first hydrophobic agent are used. In first coating which is named as PS coating, stearic... 

Minimally invasive surgery (MIS) is a new surgical technique in which surgery is performed using smart instruments and viewing apparatus inserted through a very small incision rather than by making a large incision to expose, and afford access to the operation site. Piezo film force sensor can be used in MIS graspers for providing tactile data to overcome problems such as lack of sense of touch or to find hidden arteries.This thesis, investigates fundamental understanding of piezo film sensor especially when we want to connect these sensors to measurement units.Two different approaches for signal conditioning the sensor have been proposed and circuits have been fabricated. Several... 

Nowadays, separation and filtration of particles has many industrial applications in biology and medicine. In this thesis, passive microfluidics are designed and simulated which are able to separate and filter particles. Although particles aer generally expected to follow laminar flow streamlines in the absence of external forces, inertial forxes van cause particles to migrate across mictochannels in an accurate and predictable manner. The effect of these forces is invedtigated, and by using previous research, a model is developed to predict these forces. First design is a microchannel with Archimedean spiral which utilizes both inertial forces and Dean flow to separate particles in the... 

The purpose of the study: The purpose of this study is to identify the crack position in homogeneous plates through health monitoring methods based on vibration. Identifying structural damage is one of the issues that attention can prevent the sudden collapse of structures and causing heavy loss of life and property. For this reason, extensive studies have been conducted in this field in recent decades. In this study, plates are examined as one of the most used structural members, and their damage is identified through a proposed method based on wavelet transform. Research method: In this study, through the wavelet transform method, the dynamic responses of a homogeneous plate excited by a... 

There is a large, at times contradictory body of investigations relating low back pain and spinal curvature in sagittal plane. The previous studies have not been subject-specified, and they have not considered the active tissues in the models. The mechanical load has a significant impact on the prevalence of low back pain and the geometry of lumbar spine in the sagittal plane is one of the most important characteristics in determining the load sharing of the spine. Thus, it is essential to know how the geometry load affects the load sharing of the lumbar spine. As a matter of fact, the purpose of this project is to know how the geometry of the lumbar spine affects the load sharing. Thus,... 

Lameness in dairy cattle is a crucial welfare issue in dairy industry, and over the years scientists are attempting to present a detection method. In recent years it is attracting more attention to make the identification and discrimination of sounds and lames systematic and automatic. Right now, the most hopeful results have been obtained through the measurement of Ground Reaction Forces (GRF) of hooves, and analysis of load distribution between four legs, which seems applicable for wide use in dairy industry. However, the accuracy, validity, and reliability of discrimination is still far from an acceptable point, that is because of a great lack in understanding quantitative effects of the... 

With the increasing trend toward Minimally Invasive Surgery (MIS) procedures in last 2 decades, the need to develop new robotic systems to facilitate such surgeries is more and more recognized. The aim of developing robotic surgery systems is not to replace surgeon with robots. Thus, the robotic surgery systems have the approach of master and slave robots. One of the main deficiencies of existing robotic surgery systems is the lack of sense of touch during the surgery. Consequently, the surgeon cannot touch the tissues to examine the quality of surgery .Hence This project describes the design and development of a 5 DOF force-reflective master robot (RoboMaster1) for haptic telesurgery... 

In a world where energy conservation is a critical topic, cooperative flexible manipulators will play an important role. Conventional robotic manipulators have been designed to have maximum stiffness to achieve both minimum vibration and good positioning accuracy of the end-effector, which causes more power consumption and reduced efficiency. Due to the high inertia of such arms, interaction with humans or sensitive environments is hazardous. On the other hand, Flexible Link Manipulators are designed to be lightweight, using lower energy and producing higher efficiency. Unfortunately, the link's flexibility increases vibrations and decreases the accuracy of the end-effector. Since, the... 

This work numerically simulates pressure drop and heat transfer for flow in a pipe with porous wall. Incompressible two dimensional, ax symmetric laminar or turbulence flow with constant mass flow rate is considered. It is assumed that there is no thermal equilibrium in the porous media region between solid and fluid phase. Effect of porous wall thickness and Darcy number on the rate of heat transfer and pressure drop were investigated. The Darcy number varies from to and porous wall thickness can fill entire pipe. the turbulent model is used to calculate the fluid flow and heat transfer characteristics in turbulent flow. Nusselt number can enhance about ... 

Prediction of shear plane angle is a way for prediction of the mechanism of chip formation, machining forces and so on. In this study, Merchant, Corrected Merchant, Lee and Shaffer, Lee and Shaffer with Built up Edge, Corrected Lee and Shaffer and Slip line theories are used for prediction of shear plane angles and cutting forces in machining of Al/SiCp metal matrix composite. The experimental cutting forces are compared with the calculated cutting force based on shear plane angles extracted from Merchant, Corrected Merchant, Lee and Shaffer, Lee and Shaffer with Built up Edge, Corrected Lee and Shaffer and Slip line theories. The variation of these cutting forces with cutting speed, feed... 

Nowadays, the significance of securing data and information is undeniable. Cryptography is being used to provide data security. In addition, cryptanalysis is required to evaluate the effectiveness of cryptography methods, and hence, it is an essential concept for securing data. In general, the cryptography functions shall be designed in a way to impose a high load of time-intensive operations to prevent an adversary from accessing the main data from the encrypted data. As a result, cryptography and cryptanalysis algorithms need high performance computations. So far, a number of methods have been proposed to support the required performance. These methods include: distributed computing and... 

One of the most important parts of designing turbine blades is machining (milling) process of blade root. There is some implementing problem in material removal processing by milling. Because of low heat transferring of inconel 738 in machine parts there is huge amount of heat which cause high temperature in machine and burning, which reduces the efficiency of milling.One of the common way to reduce the temperature of machine is using coolant fluids, which increases expenses and makes environmental pollution, so it is not completely efficient as an industrial work. In this paper Whit using MQL and some new lubricant had been observed more efficient condition in milling process. The main goal... 

Since critical and defining sets have been examined in various fields of combinatorics, including Latin squares and different branches of graph theory, we aim to present a portion of the obtained results con-cerning defining sets in diverse fields of graph theory, and provide a survey on them.In the present dissertation, we examine defining sets of vertex coloring,edge coloring, total coloring and forcing sets of orientation of graphs,perfect matching, hull and geodetic sets. Since complete graphs’ col-oring defining sets and Latin squares’ critical sets are closely related,we shall discuss them in a coloring framework. Furthermore, for dif-ferent graph families, including regular graphs,... 

This research has been surveyed the impact of intermediate skilled and high skilled human labor force on the productivity of manufacturing sectors by the Nelson & Phelps and also Lucas approaches. first model is related to the level of productivity and the second model is related to the growth of it. We has been prepared the needed statistics from the raw figures of iran statistics center. regression analysis has been done on the basis of panel data model by the use of stata software. the results show that not good efficiency to optimize technology factor of Cobb-Douglas model although it shows higher marginal labor productivity of high skilled human labor force. we has proposed some... 

Rapid growth in energy consumption and environmental concerns over conventional power generation technologies has increased the need for alternative energy sources. Kinetic hydropower has been available for decades, however, despite its minimal environmental impact, commercialization has been limited. The main purpose of the first part of this thesis is investigation of flow properties near the convergent-divergent nozzles with various geometries. Two parameters that studied include variation of drag force on body and mean velocity of water flow in middle cross section. In the second part, we studied a horizontal marine current turbine (which its geometry is taken from a NREL wind... 

Because the structural stability is directly related with structural damage, it is considered one of the most important issues in the industry. One of the applied cases in the stability issue discuss about the stability of the beam under follower loads. Follower loads obtained from aerodynamic pressure, rocket’s thrust, dry friction of the rotating disk, drilling and etc. Because the follower loads are always perpendicular to the beam cross section, thus with changing the angle of their location, their directions are changed. Spatial dependence makes a non-conservative and dynamic problem. So these loads causes dynamic instability that say flutter. In this study, the stability of a...