Sharif Digital Repository

This work is concerned with the role of geometrical properties of fractures on oil displacement efficiency during solvent injection to heavy oil. Here, a series of solvent injection processes were conducted on one-quarter five-spot fractured micromodels that were initially saturated with the heavy oil, at a fixed flow rate condition. The oil recovery was measured using image analysis of the continuously provided pictures. The results show that for the range of experiments performed here, the maximum oil recovery happens at a fracture orientation angle of 45 degrees. Also, increasing the number of fractures leads to a higher oil recovery factor by solvent in 45 degrees, while it does not... 

Many oil reservoirs encounter asphaltene precipitation as a major problem during natural production. In spite of numerous experimental studies, the effect of temperature on asphaltene precipitation during pressure depletion at reservoir conditions is still obscure in the literature. To study their asphaltene precipitation behavior at different temperatures, two Iranian light and heavy live oil samples were selected. First, different screening criteria were applied to evaluate asphaltene instability of the selected reservoirs using pressure, volume, and temperature data. Then, a high pressure, high temperature filtration (HPHT) setup was designed to investigate the asphaltene precipitation... 

In this article a series of experiments were performed to demonstrate the effect of carbon dioxide injection pressure on a huff and puff process. The experimental data are used in a lab-scale model simulated with a commercial simulator to investigate the effect of soaking time, injection pore volume, and rate of injection on the heavy oil recovery. The result of experiments showed that a huff and puff process under miscible pressure conditions gives the most recovery. Simulation results illustrated that there is an optimum value for soaking time, which, for soaking times less than this value, recovery increases and for values greater than optimum the recovery decreases. The simulation study... 

In this work a series of solvent injection experiments was conducted on horizontal glass micromodels at several fixed flow rate conditions. The micromodels were initially saturated with heavy crude oil. The produced oil as a function of injected volume of solvents was measured using image analysis of the continuously provided pictures. In order to investigate the macroscopic behavior of the process in different media, several fractured, with constant width, and nonfractured five-spot micromodels were designed and used. The measured data have also been used for verifying and developing a simulation model that was later used for sensitivity analysis of some parameters that affect oil recovery.... 

Thermal recovery by steam injection has proven to be an effective means of recovering heavy oil. Forecasts of reservoir response to the application of steam are necessary before starting a steam drive project. Thermal numerical models are available to provide forecasts. However, these models are expensive and consume a great deal of computer time. An alternative to numerical modeling is to use a semi-analytical model. The objective of the current study was to investigate thermal applications of horizontal wells for displacement and gravity drainage processes using analytical modeling as well as reservoir simulation. The main novelties presented in the paper are: a) the transient temperature... 

Molecular diffusivity is an essential parameter for modeling of mass transfer in enhanced oil recovery processes. However, experimentally determined diffusivities for light gas-heavy oil systems in the presence of porous media are relatively rare. A few correlations are available in the literature that predict diffusivity of gases into heavy oil in presence of porous media. In this work the pressure-decay method was applied to obtain effective molecular diffusion of CO 2, CH 4 and N 2-heavy oil systems in both bulk and porous media systems at different temperatures. The diffusivity of gases in heavy oil was determined by matching the numerically calculated pressures to the measured data. A... 

The performance of CO2 injection into a semi-heavy oil reservoir was investigated at reservoir conditions, using highly permeable sandstone in a complete series of PVT tests and coreflooding experiments. Analysis of involved parameters such as: injection rate, injectant type and reservoir pressure were also considered. Oil viscosity reduction and oil swelling are the most influential mechanisms of enhanced oil recovery in this process. The results demonstrated that CO2 injection would decrease the interfacial tension for the high permeable medium in the absence of capillarity, but this reduction may not improve the recovery drastically. One of the main important aspects of this work is the... 

The performance of CO2 injection into a semi-heavy oil reservoir was investigated at reservoir conditions, using highly permeable sandstone in a complete series of PVT tests and coreflooding experiments. Analysis of involved parameters such as: injection rate, injectant type and reservoir pressure were also considered. Oil viscosity reduction and oil swelling are the most influential mechanisms of enhanced oil recovery in this process. The results demonstrated that CO2 injection would decrease the interfacial tension for the high permeable medium in the absence of capillarity, but this reduction may not improve the recovery drastically. One of the main important aspects of this work is the... 

The role of emulsions as a prevalent phenomenon is broadly investigated in the petroleum industry since forming the emulsion has many severe harmful implications. Heavy components of crude oil such as wax and asphaltene make the water-in-oil (w/o) emulsion more stable, while the role of these components on the emulsion viscosity has not been fully understood. In this regard, to find a proper demulsifier to break these emulsions, it is necessary to know the mechanisms of emulsion formation by heavy oil components. In this study, the effects of waxy-oil and asphaltenic-oil on w/o emulsion were investigated by measuring volume and viscosity of the formed emulsion after an elapsed time, followed... 

In this work, a series of solvent- and water-injection scenarios were conducted on horizontal five-spot glass micromodels that were saturated initially with heavy oil. Sandstone and limestone rock look-alike and network patterns with different pore structures were used in the experiments. The results show that the ultimate oil recovery of a water-alternating-solvent (WAS) scheme was greater than that of a simultaneously water-alternating-solvent (SWAS) scheme, and the efficiency of a solvent-soak scheme also offers a greater recovery. Likewise, the WAS scheme resulted in greater oil recovery when compared with continuous solvent injection (CSI), with the same amount of solvent consumption.... 

The strength of a newly formulated surfactant with an alkali and polymer (AS/ASP) to improve an acidic heavy oil recovery was laboratory evaluated by various flooding experiments. The comparative role of the parameters like chemical nature, surface wettability, salinity, temperature and injection scheme were explored at high temperature and pressure on Berea sandstone rocks. According to the results the anionic surfactant is capable of providing proper oil displacement under high salinity conditions around 15 wt%. Continuous monitoring of differential pressure response and effluents’ state clearly represented the formation of an emulsified oil in high saline solutions with both alkali and...