Sharif Digital Repository

In this research, it has been tried to use alumina and magnesia nanoparticles to hydroxyapatite nano powder, a three-component coating, with corrosion resistance, adhesion and desirable biocompatibility on the 316 stainless steel substrate, by electrophoretic method. It should be applied at 3 voltages of 10, 30 and 50 volts and for 3 minutes. TEA was used as a dispersing agent and ethanol as a solvent to prepare the suspension. Alumina nano powder was added to nanohydroxyapat in two amounts of 10 and 20% by weight and 20% was optimized as the amount, and magnesia nano powder was added to the composition in three amounts of 1, 3 and 5% by weight, which was 3% by weight of the results Was... 

Hydroxyapatite (HA) is an attractive biomaterial due to its close chemical composition to bone and teeth. However, HA is brittle and has low strength under bearing loads, resulting in limition for orthopedic and dental applications. Two creative approaches have been developed to overcome this problem, using bioactive HA as coatings on metallic implants or as ceramic/metal composites. Carbon nanotubes (CNT) possess excellent mechanical properties to play the role as reinforcement for imparting strength and toughness to brittle hydroxyapatite (HA) bioceramic coating. Moreover, The addition of TiO2 to HA coatings has attracted considerable attention, since TiO2 is capable of increasing the... 

This investigation presents synthesis and characterization of pure and monophasic hydroxyapatite (Ca10(PO4)6(OH)2; HA) Nanostructures prepared by coral and oyster shell powders heated at 800 oC for 8 h as precursor via precipitation method. The morphology of HA nanostructures was controlled in the presence of various surfactants such as SDS, CTAB and PVP. The HA Nanorods synthesized by SDS were applied to fabricate bone scaffolds. Particle sizes of the HA Nanoparticles were about 20-30 nm. Pours three-dimensional HA/Ge/CMC scaffolds cross-linked by citric and oxalic acids were synthesized. In order to increase the pore size of the scaffolds, NaCl with medium (180-250 µm) and large (420-500... 

Hydroxyapatite (HA) is the most substantial mineral constituent of a bone which displays splendid biocompatibility and bioactivity properties. Nevertheless, its mechanical property is not utmost appropriate for a bone substitution. Therefore, a composite consist of HA and a biodegradable polymer is usually prepared to generate an apt bone scaffold. In the present work polycaprolactone (PCL), a newly remarkable biocompatible and biodegradable polymer, was employed as a matrix and hydroxyapatite nanoparticles and nanorods were used as a reinforcement element of the composite. HA/PCL nanocomposites were synthesized by three new in-situ sol-gel processes using a diverse range of phosphorus and... 

The purpose of this study was aimed to evaluate the effect of Alumina on the sintering, phase development, mechanical properties and biocompatibility of fluoridated hyroxyapatite sintered via conventional furnace and microwave assisted oven. Green compacts having 30wt% Alumina nanoparticles were sintered without pressure at various temperatures (1000-1400°C) for one hour in conventional furnace. Phase composition, thermal behavior and morphological analyses were performed using X-ray diffraction (XRD), simultaneous thermogravimetry and differential thermal analysis (STA), and Scanning Electron Microscopy (SEM), respectively. With the increase in temperature and the Alumina content, severe... 

In this study effect of various mullite contents, as reinforcement phase, on phase combination, fracture surface and mechanical propertiese of hydroxyapatite- mullite composite has been investigated.
The used hydroxyapatite powder was synthesized through acid- base route and further calcination. XRD results demonstrated partially decomposition of HA in to β- TCP and CaO during the calcination. SEM image of the prepared HA powder showed that they were spherical and agglomarated.
The mixed HA with various amounts of the ball- milled mullite (10- 40 wt%)were pressed and sintered at 1350°C for 2h. Dominant phase in all composite samplese after sintering was Ca9Al(PO4)7.
Phase... 

Metallic implants are useful in dental and orthopedic applications. Bio coating is necessary to improve bio-compatibility and bio-activation of metallic implants. For this goal, HA is the most important material. In this research, the goal is to improve bio-compatibility of St. St 316 by coating HA, HA-ZrO2, HA-TiO2, HA-ZrO2-TiO2 using combination of electrodeposition and electrophoretic methods. To form HA, calcium and phosphor salt solution was used then ZrO2- TiO2 nanoparticles was added to solution. In order to analyst the coatings different tests were done. Thickness analysis, XRD, FT-IR, FE-SEM and EDS, bonding Strength, Polarization test, bio-compatibility and surface roughness... 

In this research, role of zirconia nanoparticles as a biocompatible material which has great mechanical properties, was investigated on corrosion behavior and bonding strength of HA coating. HA- ZrO2 composite prepared by a 2-step pulse electrodeposition method. Effect of pH (3.5, 4.5), bath temperature (60, 80 ͦC), current density (0.5, 1, 2 mA/cm2) and zirconia concentration (5, 10, 15 g/L) on coating characteristics were studied. X-ray diffraction was employed for phase analysis. Morphology and microstructure of samples observed utilizing scanning electron microscope (SEM) and elemental analysis was done by EDS. In order to corrosion studies electrochemical impedance spectroscopy (EIS)... 

Magnesium and its alloys are potentialy biodegradable implant materials due to their attractive biological properties. But their poor corrosion resistance may result in sudden failure of the implants. Recently, many researchers have focused on applications of fluorine-doped hydroxyapatiteCa10(PO4)6(OH)2−xFx (FHA, x is the degree of fluoridation) as a bioactive coating to provide early stability and long-term performance. In comparison with pure HA coating,FHA coating could provide significant dissolution-resistant property, better apatite-like layer deposition, better protein adsorption, better cell attachment and improved alkaline phosphatase activity in cell culture. In this... 

There are many techniques that have been used to create hydroxyapatite nanoparticles coating on nanotubes. Electrophoretic deposition (EPD) is one of the methods that has advantages of short formation time, needs simple apparatus, little restriction of the shape of substrate, no requirement for binder burnout as the green coating contains few or no organics. In the research, first, titanium dioxide nanotubes were fabricated by anodic oxidation. Anodizing voltage effect on the morphology of nanotubes was evaluated. SEM images was shown that in the anodizing voltage 20V, nanotubes were the most regular. Then, Hydroxyapatite nanoparticles has been deposited onto nanotublar TiO2 by... 

Medical engineering advances in total joint replacements and society’s rising demand for long lasting materials, have proven it essential to manufacture materials that are more similar to the original tissue in the fields of mechanical, tribological and biological properties. Ultra High Molecular Weight Polyethylene(UHMWPE), is a polymer widely used in arthroplasty applications due to its biocompatibility, chemical stability and proper mechanical properties. In this study, UHMWPE-HAp nanocomposites reinforced with Zirconia and Graphene were manufactured aiming to reach a structure that is more compatible with bone tissue and also to improve overall properties. First, using ultrasonication... 

The aim of this project is to load analgesic drug; Paracetamol on dental implant. The implant is titanium alloy (Ti-6Al-4V). There are two kinds of samples of anodized and HA coated onto anodized. They are in the shape of the sheets in this study. The electrodeposition and anodization carried out in order to treat the two samples. Nanotubes were formed during anodic oxidation of the samples in the 1M Ammonium sulfate (NH₄)₂SO4 and 5wt% Ammonium fluoride NH4F electrolyte. They are expected to play role of carrier for the model drug; paracetamol. The results showed that HA anodized Ti-6-4 has the ability to hold higher amounts of drug and also can keep the drug for a longer time than the... 

In this project, a ceramic biocompatible coating was applied on Titanium which is included Hydroxyapatite by AC Plasma Electrolyte Oxidation method. First, coating was performed in 5 different solutions and various duration in 500mA/Cm2 as a current density. Then, by microscopic and macroscopic images and size of porosity and also thickness of coat, 3 solutions were chosen for adding nanoparticles: Solution 1 which includes NaH2PO4 and Ca(CH3COO)2 , Solution 3 which includes Ca(CH3COO)2 and Na-Beta G and Solution 4 which includes Ca(H2PO4)2, HMP, NA2(EDTA) and Ca(CH3COO)2 . Also the time 10 minutes was chose as a appropriate time. The average of the porosities size in solution 1 was about... 

Magnesium and its alloys are biodegradable materials with mechanical properties similar to the bone tissue, therefore these materials are suitable for producing orthopedic implants. Unfortunately Magnesium and its alloys are corroded too fast in physiological environment which is the main obstacle for usage of these materials as orthopedic implants. Producing Hydroxyapatite(HA) coatings on surface of Magnesium and its alloys is one of the popular and useful methods for reducing the corrosion rate in physiological environment. HA is a biocompatible and bioactive coating with the ability to bond chemically with the bone tissue and therefore it is largely used as a bioactive coating on the... 

Hydroxyapatite-Graphene Nanocomposite coatings were formed on Ti-6Al-4V alloy by Plasma electrolytic oxidation. PEO electrolyte contains calcium acetate and calcium glycerophosphate. The effect of adding graphene to PEO electrolyte on the corrosion, mechanical, and biocompatibility properties of the coating investigated. Before adding graphene to the electrolyte, working parameters such as voltage, current density, process time were optimized using scanning electron microscopy (SEM), potentiodynamic polarization test, and thickness measurement. Examination of the coating morphology showed that due to thermal stresses, surface cracks formed at Voltages above 350 V. The results of the... 

With the increase in the average age of the world's population, osteoporosis is a worldwide incidence. This disease, along with natural disasters, are important factors in the occurrence of fractures in various bones of the body. One of the methods for solving this problem and replacing with broken body bones is the use of metal implants with hydroxyapatite-based coatings. One of the common problems with using implants in the body is the infection in the adjacent parts of the implant. To overcome this problem, several studies have been carried out on the use of hydroxyapatite coatings with metal ions or antibacterial oxide compounds. In the present study, the influence of factors such as the... 

At the first stage, chitosan-hydroxyapatite-multiwalled carbon nanotube (CH-HA-MWCNT) composite coatings were synthesized by electrophoretic deposition technique (EPD) on Ti6Al4V and 316L stainless steel substrates at different levels of pH and characterized by X-ray diffraction (XRD), Raman spectroscopy, FTIR and field emission scanning electron microscopy (FESEM). A smooth distribution of HA and MWCNT particles in a chitosan matrix with strong interfacial bonding was obtained. At the second stage, effect of pH and MWCNT content of the suspension on corrosion behavior and mechanism of deposition were studied. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS)... 

In this project ,it has been done different surface treatment on 6 samples of nitinol with 40 % prosity,three of them are anodized by H2SO4 ,Hf, Acetic acid, one of them is treated with plasma spray with TIO2 powder, one of them is putted in the furnace at 700 degrees for an hour, and the last one is bare ; Moreover, these treated samples are putted in Simulated body fluid for 16 days . After this period of time, we analyzed the results. Then the cell adhesion amount of osteo blast cells (MG 63) is measured to these samples by immersing them for 3 days in these cells.The results are investigated by SEM ,XRD(X pertpro produced by Panalitical), XRF(530-XRF-01), AAS( AA240), Roughness measuring... 

Magnesium is one of most important elements in bio hedroxyapatite. Magnesium effects on all stages of bone growth metabolism. Also increases bone’s osteoblastic and osteoclastic activities. That’s why incorporation of Mg ions into hudroxyapatite structure has become one of interesting fields for bone implants production. In addition Mg can improve sintering and mechanical properties of HAp. Thet’s why in this investigation the effect of incorporated Mg into HAp structure has been studied. Three kinds of powders have been prepared to perform this study. Pure HAp nano powder produced via sol-gel method, Mg contain HAp nano powder produced via sol-gel method and a mixture of nano HAp and nano... 

In this study, biocompatible ceramic coating, containing hydroxyapatite particles (HA), was successfully created by AC anodizing, on the surface of commercially pure titanium grades 2. Coating process basically consisted of three methods. In Method 1, samples were anodized in a salty electrolyte containing calcium – phosphate base and in method 2 samples were anodized as initial process, following cathodic polarisation deposition of HA particles. Finally in method 3, samples were anodized in an electrolyte containing of HA particles suspension.Parameters such as current density and time of anodizing process, in first procedure, and time of cathodic deposition process in second procedure, and...