Sharif Digital Repository

This study involves the capability of severe shot peening (SSP) as a catalyst intake for plasma nitriding process and the probability of reducing the requirement of thermal energy individually on the diffusion of interstitial atoms. To this end, combination of mechanical-thermal energy is run with pure thermal plasma assisted energy. Therefore, SSP is exposed to AISI 304 austenitic stainless steel as a former treatment and gradient structured surface (nanograined zone, ultrafine grain martensite-twin intersections zone and twin densed zone) is created. Then, plasma nitriding at 400 0 C-4h and 475 0 C-2h temperature-duration conditions. The condition of 475 0 C-2h provides the requirements of... 

Asphalt Pavement Alliance (APA) created the Perpetual Pavement Award program in 2001. This program requires that the roadway has at least 35 years of service at the time of award and had experienced no structural failures. In addition, the program limits candidate roadways to those that have not received more than 100 mm of new asphalt nor have been resurfaced at a frequency exceeding 13 years. Minnesota Department of Transportation (MnDOT) currently owns the record for the most award winners and has received an award every year from 2002 through 2017. This study reviews all the award-winning roadways in Minnesota to determine common material, design factors and considerations which may have... 

Organic Rankine Cycles (ORCs) are promising approaches for generating power from medium or low temperature heat sources. In this regard, ORCs can be used to indirectly produce power from solar energy. Due to intermittent nature of solar energy, storage unit should be coupled with solar ORCs to improve the output power and operating hours. In this article, studies on solar ORCs integrated with various types of storage units were reviewed; the main findings of such studies were extracted and provided. Based on the findings, several factors such as the temperature and pressure at the inlet of the turbine, as well as the operating condition affect the performance of solar ORCs with thermal... 

Severe plastic deformation (SPD) processes have received less attention at low temperatures (sub-zero and cryogenics). Hence, in this study, SPD of a commercially pure aluminum (AA1050) through Multi-Directional Forging (MDF) at Low-Temperature (LTMDF) and Room-Temperature (RTMDF) is investigated for different strains. Multi-directionally forged (MDFed) samples were annealed at 150, 250, 350, and 450 °C for 1 h, and some samples were stored at room temperature for periods up to 1 year. Results show that the hardness values and flow stress of LTMDFed aluminum are higher than those of RTMDFed ones. The ratio of yield strength to hardness for LTMDF is similar to that for RTMDF. Surprisingly,... 

Phenomenological constitutive modeling of Ti-6Al-4V at temperatures between 923 and 1023 K under 0.0005–0.05 s−1 quasi-static rates is studied based on a phenomenological approach. For this purpose, the Johnson–Cook constitutive model is revisited. At low temperature conditions under moderate to high strain rates, the material’s stress–strain curves are the most similar to power-law function. Contrary to this, at high temperature conditions under low to moderate strain rates, the saturation-type function well describes the stress–strain curves. On the other hand, it is illustrated that the Johnson–Cook constitutive model is feeble to predict the material’s behavior correctly. Accordingly, in... 

The strain-induced martensitic transformation greatly affects the plastic behavior of the metastable austenitic stainless steels. The martensitic transformation continuously changes the initially homogeneous material into a strongly heterogeneous bi-phase one. In addition to the hardening behavior, this phenomenon would influence the damage growth and load-carrying capacity of the material during the plastic deformation. In this study, plastic behavior of the material AISI 304 including the hardening and damage growth, has been examined at low temperature; where a high rate of martensitic transformation affects the microstructure strongly. Experimental analysis and microscopic observations... 

In this paper, LM pectin production from commercial apple pectin by using acid, alkali and ammonia methods in the presence of ethanol was studied. Also, the effect of different parameters such as, temperature, time, acid, alkali and ammonia treatment in LM pectin production were evaluated. In all the experiments, low temperature showed a better influence from a recovery, purity and low de-polymerization viewpoint. Optimum conditions in the acid method reached at pH = 2, t = 17 hrs and T = 30°C, in the alkaline method reached at pH = 11, t = 3 hrs and T = 5°C and in the ammonia method reached at 2 N ammonia and T = 5°C, were determined. © Sharif University of Technology  

In this study, magnesium boro/carbothermal reduction of zirconium silicate (ZrSiO4) was employed to synthesize zirconium-based composite nanopowders of ZrB2–SiC, ZrB2–ZrC–SiC, ZrC–SiC, and ZrC. For this aim, three different temperatures of 1200 °C, 1300 °C, and 1450 °C were selected as the supposed temperatures for synthesis. Elemental Mg and NaCl were also selected to assist reduction process. In addition, effects of different C/Zr ratios as well as using elemental boron and B4C as two different boron sources were investigated on the final produced phases. Subsequently, XRD and SEM/EDS analyses were carried out to elaborate microstructure and phase studies. Finally, STA carried out up to... 

Topological orders have been intrinsically identified in a class of systems such as fractional quantum Hall states and spin liquids. Accessing such states often requires extreme conditions such as low temperatures, high magnetic fields, pure samples, etc. Another approach would be to engineer the topological orders in systems with more accessible ingredients. In this work, we present networks of Majorana bound states, which are currently accessible in semiconductor nanowires proximitized to conventional superconductors, and show that the effective low-energy theory is topologically ordered. We first demonstrate the main principles in a lattice made of Kitaev superconducting chains comprising... 

Understanding the motion characteristics of fullerene clusters on the graphene surface is critical for designing surface manipulation systems. Toward this purpose, using the molecular dynamics method, we evaluated six clusters of fullerenes including 1, 2, 3, 5, 10, and 25 molecules on the graphene surface, in the temperature range of 25 to 500 K. First, the surface motion of clusters is studied at 200 K and lower temperatures, in which fullerenes remain as a single group. The trajectories of the motion as well as the diffusion coefficients indicate the reduction of surface mobility as a response to the increase of the fullerene number. The clusters show normal diffusion at the temperature... 

Low temperature lithium titanate compounds (i.e., Li4Ti 5O12 and Li2TiO3) with nanocrystalline and mesoporous structure were prepared by a straightforward aqueous particulate sol-gel route. The effect of Li:Ti molar ratio was studied on crystallisation behaviour of lithium titanates. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that the powders were crystallised at the low temperature of 500 °C and the short annealing time of 1 h. Moreover, it was found that Li:Ti molar ratio and annealing temperature influence the preferable orientation growth of the lithium titanate compounds. Transmission electron microscope (TEM) images showed that the average... 

Nanocrystalline zinc titanate (ZnTiO3) thin films and powders with purity of 94% were produced at the low sintering temperature of 500 °C and the short sintering time of 1 h by a straightforward aqueous particulate sol-gel route. The effect of Zn:Ti molar ratio was studied on the crystallisation behaviour of zinc titanates. The prepared sols showed a narrow particle size distribution in the range 17-19 nm. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that the powders contained mixtures of the rhombohedral-ZnTiO3, cubic-ZnO, cubic-Zn2TiO4 phases, as well as the anatase-TiO2 and the rutile-TiO2 depending on the sintering temperature and Zn:Ti molar ratio.... 

Low-temperature perovskite-type cadmium titanate (CdTiO3) with a nanocrystalline and mesoporous structure was prepared at various Ti:Cd molar ratios by a straightforward particulate sol-gel route. The prepared sols had a narrow particle size distribution, in the range 23-26 nm. X-ray diffraction and Fourier transform infrared spectroscopy revealed that the powders contained a mixture of ilmenite-CdTiO3, perovskite-CdTiO3, anatase and rutile phases, depending on the annealing temperature and the Ti:Cd molar ratio. Perovskite-CdTiO3 was the major type obtained from cadmium-prominent powders at low temperature, whereas ilmenite-CdTiO3 was the major type obtained from titanium-prominent powders... 

In this work, we aim to study the effect of temperature gradients on the combined natural convection-radiation heat transfer problem in participating media. To impose this combined effect, we first solve the radiative transfer equation in an absorbing and emitting media. Then, we suitably add the radiation source terms to the energy equation and solve the fluid flow equations. Literature shows that many incompressible algorithms use the Boussinesq assumption to model the thermobuoyant force; however, the validity of this assumption is limited to cases with low temperature gradient distributions. Evidently, Boussinesq assumption would result in considerable errors in high temperature gradient... 

Hydrolysis of titanium isopropoxide alcoholic solution has been used to prepare the crystallized TiO2 nanoparticles at low temperature. Concentration ratio was used to control the pathway of sol-gel process and change the physical characteristics of TiO2 nanopowders. The crystallinity, morphology and size of aged TiO2 nanopowders were studied by X-ray diffraction and Scanning Electron Microscopy (SEM). FTIR and, Thermo-Gravimetric (TG) analysis were used to identify the functional groups and thermal behavior of prepared samples. Experimental results have shown that high crystalline TiO2 nanomaterial with anatase polymorph can be obtained at room temperature. It has been found that the... 

Chemical vapour deposition (CVD) at atmospheric pressure, using TiCl 4 as a precursor, was used to grow nanostructured TiO2 films on glass substrates. At relatively low temperatures (∼245 °C) and using relatively high reactant concentrations, different nano-morphologies of TiO2 were formed simultaneously, such as spheres, nanowires and mesoporous structures. The TiO2 spheres were successfully applied as light-scattering particles in dye-sensitized solar cells, either by direct deposition onto electrodes in the reactor, or by preparation of a printing paste from the deposited particles. For dye-sensitized solar cells using the organic dye D35 as sensitizer and a cobalt-complex based redox... 

In this research, the effects of nano-sized MgO in Al2O 3-SiC composites were investigated. The overall changes in the density and mechanical properties of sintered samples (hardness, bending strength and toughness) were evaluated. After mixing, drying and uniaxial compaction of the powders, they were first heat-treated at low temperature in an electric furnace to remove any residuals. They were then heat-treated at high temperature (1700 °C) inside a graphite furnace in argon atmosphere for sintering (at normal and high pressure). The content of MgO in the Al 2O3-10 vol% SiC composite was 0, 500, 1000, and 1500 ppm. Thefracture toughness(KIC)of sintered composite with 10...