Sharif Digital Repository

A stable composite film of silver nanoparticles (Ag NPs) decorated on reduced graphene oxide is prepared by a two-step simple procedure. The surface morphology of the modified electrode is characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. The electrochemical behavior of tinidazole (TNZ) on the surface of the modified electrode is investigated by linear sweep voltammetry and electrochemical impedance spectroscopy. The prepared composite electrode acts as a highly sensitive platform for the voltammetric determination of TNZ, leading to a significant increase in the reduction peak current of TNZ. The effects of experimental parameters such as the... 

Phonon detector can be designed by using colloidal silver nanoparticle (Ag NP) in presence of 1-Ethyl-3-methylimidazolium Hexafluorophosphate [EMim][PF6] ionic liquid (IL) via computational technique as the first time for many and high performance biosensors applications. Density functional theory as a quantum chemistry calculation method has been used to get the potential interaction between silver metal and ionic solvent. Molecular dynamics simulation shows that in small sizes of colloidal Ag NP in [EMim][PF6], electrical effect of IL makes one main phonon peak and in big size of colloidal Ag NP, splitting of phonon density occurs with two peaks due to the lower electrical field of IL with... 

A highly sensitive and selective sunlight-driven photoelectrochemical sensor for the direct detection and reduction of chromium(VI) was developed based on single crystal rutile titanium dioxide nanorods decorated with gold nanoparticles. Under sun simulator illumination via the amperometric technique, these Au decorated TiO2 photoelectrodes exhibited the highest sensitivity (13.94 μA μM−1) ever reported among Au-based electrodes for Cr(VI) detection, with a very low detection limit (S/N = 3) of 0.006 μM and wide linear concentration range from 0.01 μM to 50 μM. Measurements in real water samples such as laboratory and river water also showed excellent anti-interference and recovery... 

Vacuum residue cracking has been successfully conducted under supercritical water condition in presence of various metal oxide nanocalysts, namely NiO, CuO, ZnO, Co2O3, and Cr2O3 synthesized at supercritical water. The cracking experiments were carried out at 450 °C. Three species of cracking: maltene, asphaltene, and coke were then weighed and their corresponding speciation was defined. Gas chromatography-mass spectrometry (GC–MS), nuclear magnetic resonance spectroscopy (NMR), thermogravimetric analysis (TGA), and elemental analysis (CHNS) tests were utilized to prove the performance of upgrading reactions. It was revealed that NiO showed the best performance among other catalyst, in which... 

Molecular dynamic simulation was performed to calculate the configurational entropy and the free energy for colloidal silver nanoparticles (Ag NPs) in 1-Ethyl-3-methylimidazolium Hexafluorophosphate [EMim][PF6] ionic liquid (IL). Furthermore, the density functional theory (DFT) was used to get the potential interaction between the metal surface and ion in IL. The effect of size and temperature on the configurational entropy and the free energy of colloidal Ag NPs were investigated. Then, it was compared with the gas phase. The Tsallis nonextensivity of entropy was investigated for different sizes of colloidal Ag NPs and it was shown that sub-extensivity of entropy occurs for colloidal Ag... 

The chitosan-grafted-poly(N-vinylcaprolactam) (chitosan-g-PNVCL) nanofibers were synthesized via electrospinning method. ZIF-8 metal-organic frameworks nanoparticles were incorporated into the nanofibers for adsorption of Cr(VI), As(V) and phenol from water. The BET, FTIR, XRD and SEM analysis were carrfried out to obtain the characteristics of nanofibers. The optimum parameters of ZIF-8 content, pH, contact time, adsorbent dosage, and initial concentration of adsorbates on the Cr(VI), As(V) and phenol removal were studied. The reusability of synthesized nanofibers for five sorption-desorption cycles was also examined. The maximum experimental adsorption capacity of the... 

In the present study, hardness and tribological properties of nanostructured copper reinforced with SiC nanoparticles of various volume fractions (0, 2, 4, and 6 vol%) were investigated. The nanocomposites were fabricated by high-energy mechanical milling and hot pressing method. The Cu-SiC nanocomposites showed enhanced hardness and wear resistance against WC counterface. The hardness and wear resistance of the nanocomposite increased with increasing the amount of SiC nanoparticles up to 2 vol% in the matrix, but they decreased at higher percentages of SiC (4 and 6 vol%). Flake formation-spalling and abrasion were identified as the predominant wear mechanisms. It was found that reducing the... 

Design and fabrication of highly efficient and low-cost oxygen reduction reaction (ORR) electrocatalysts is of paramount importance for practical applications. Herein, we proposed a cost-effective, metal-free catalyst based on ZIF-8 metal-organic framework nanoparticles/electro-polymerized poly(3,4-ethylenedioxythiophene) (PEDOT) film on the surface of flexible carbon cloth (CC) electrode (ZIF-8/PEDOT/CC) via a two-step procedure. For this purpose, worm-like PEDOT nanostructures were deposited on the surface of carbon fibers using a pulse electro-polymerization technique followed by facile growth of ZIF-8 polyhedra nanoparticles via a chemical bath deposition method. The ORR measurements in... 

Design and fabrication of highly efficient and low-cost oxygen reduction reaction (ORR) electrocatalysts is of paramount importance for practical applications. Herein, we proposed a cost-effective, metal-free catalyst based on ZIF-8 metal-organic framework nanoparticles/electro-polymerized poly(3,4-ethylenedioxythiophene) (PEDOT) film on the surface of flexible carbon cloth (CC) electrode (ZIF-8/PEDOT/CC) via a two-step procedure. For this purpose, worm-like PEDOT nanostructures were deposited on the surface of carbon fibers using a pulse electro-polymerization technique followed by facile growth of ZIF-8 polyhedra nanoparticles via a chemical bath deposition method. The ORR measurements in... 

Titanium dioxide (TiO2) is an extensively used electron transporting layer (ETL) in n–i–p perovskite solar cells (PSCs). Although, TiO2 ETL experiences the high surface defect together with low electron extraction ability, which causes severe energy loss and poor stability in the PSC. In this study, a new intermediate layer consisting of gold nanoparticles functionalized with fully conjugated fullerene C60 derivative (C60-BCT@Au NPs) that enhances the interfacial contact at ETL/perovskite interface leading to a perovskite film with improved crystallinity and morphology is reported. Moreover, the studies demonstrate that the interface modification of the TiO2 ETL with C60-BCT@Au NPs... 

Lignocellulosic materials are recalcitrant to bioconversion, due to their rigid physiochemical structure. In this work, the effects of Fe2O3–TiO2 and NiO–TiO2 nanoparticles (NPs) and FeCl3 and NiCl2 salts, on the anaerobic digestion (AD) of wheat straw have been investigated. For this purpose, metal oxide-TiO2 NPs were synthesized and fully characterized. Results showed that addition of 0.252 mg of NiO–TiO2/g total solids (TS) to batch assays resulted in increase of soluble chemical oxygen demand (COD) and 67% increase in volatile fatty acids (VFAs) concentration compared to control tests during the first 4 days of experiments. These results indicate that hydrolysis and acidogenesis rates... 

A highly selective and effective catalyst and photocatalyst based on Ag, Pt, AgPt nanoparticles (NPs) on the surface of γ-Fe2O3 /t-ZrO2 nanocomposite which was derived from Fe-metal organic framework (Fe-MIL-88A) and Zr-metal organic framework (Zr-UiO-66) was developed. A green synthesis method was used for synthesis of binary nanocomposite (M = Ag, Pt, and Ag@Pt NPs)@γ-Fe2O3/t-ZrO2 and a new composite of γ-Fe2O3, t-ZrO2 structures which was made up by annealing under a nitrogen gas flow. The catalytic potential of the as-synthesized samples were considered toward the reduction of 4-nitrophenol (4-Nip) to 4-aminophenol (4-Amp) by NaBH4 solution at 25 °C and different reaction times. For the... 

High-performance wearable electronic devices with the capability of converting mechanical force into electrical energy have been gaining increasing attention for biomedical monitoring applications. We present a novel wearable piezoelectric sensor based on a poly(vinylidene fluoride) (PVDF) nanofibrous membrane containing microporous zirconium-based metal-organic frameworks (MOFs) for arterial pulse monitoring. It is shown that the incorporation of 5 wt % of MOF greatly enhances the piezoelectric constant of the polymer fibrous mat by 3.4-fold without significant loss in its flexibility. The nanofibrous composite exhibits a peak-to-peak voltage of 600 mV under an applied force of 5 N, which... 

Designing a novel epoxy composite system with dual self-healing/barrier anti-corrosion functions using graphene oxide (GO) nano-platforms decorated by polypyrrole (PPy) nanoparticles doped with zinc metal ions is the major objective of this research attempt. GO-PPy-Zn nanoplatform was fabricated via one-pot polymerization of pyrrole monomers on GO and two direct/indirect methods of zinc doping. In order to verify the PPy nanoparticles synthesis on GO sheets several analyses such as UV–visible, XPS, HR-TEM and FE-SEM were performed. The epoxy nanocomposite coatings containing GO-PPy and GO-PPy-Zn nanoplatforms were fabricated and applied on carbon steel. The nanocomposite coatings... 

In this paper, the uniaxial cold compaction process of metal nano-powders is numerically analyzed through the Molecular Dynamics (MD) method. The nano-powders consist of nickel and aluminum nano-particles in the pure and mixed forms with distinctive contributions. The numerical simulation is performed using the different number of nano-particles, mixing ratios of Ni and Al nano-particles, compaction velocities, and ambient temperatures in the canonical ensemble until the full-dense condition is achieved. In the MD analysis, the inter-atomic interaction between metal nano-particles is modeled by the many-body EAM potential, and the interaction between frictionless rigid die-walls and metal... 

The UiO-66 NH2 and ZIF-8 metal organic framework nanoparticles (NMOFs) were incorporated into the polyvinylidene fluoride (PVDF) nanofibrous membrane. Then, the chitosan nanofibers were coated on the PVDF nanofibers to produce the PVDF/chitosan nanofibers. The performance of synthesized PVDF/NMOFs single layer and PVDF/chitosan/NMOFs two layers nanofibrous membranes was investigated for BSA protein molecules and Cr(VI) ions separation via ultrafiltration membrane process. The potential of synthesized nanofibers was also examined for BSA and Cr(VI) adsorption in a batch system. The characteristics of synthesized nanofibrous membranes were determined using SEM, EDX, TGA, BET, porosity and... 

This work presents a novel melatonin sensor based on unfunctionalized macroporous graphene networks decorated with gold nanoparticles for the differential pulse voltammetric detection of melatonin in pharmaceutical products. Highly porous graphene structures were prepared by metallic template-assisted chemical vapor deposition, and their active surface area and electrocatalytic activity were improved by electrochemical deposition of gold nanoparticles (50-250 nm) on their struts. The graphene-gold electrodes present a highly sensitive performance toward electro-oxidation of melatonin with a wide linear range of 0.05-50 μM, a low detection limit of 0.0082 μM (3σ/m), and a significant... 

Ceramic-magnetic nanoparticles (CMNPs) are attracting attention due to their various applications, especially in biomedical industries. Among them, spinel ferrite CMNPs have received considerable deliberations among different spinel metal oxides due to their fascinating characteristics. Spinel ferrite CMNPs are used for enhancement of the applicability of CMNPs without affecting the intrinsic advantages of iron oxide CMNPs. Spinel ferrites with doping agents have useful electrical and magnetic properties in various fields. Moreover, the replacement of metallic atoms in ferrites is promising to manipulate physical characteristics and improve their performance. Among different spinel ferrites,... 

The heterogeneous environmentally friendly catalyst and photocatalyst based on Ag, Pt, Ag–Pt nanoparticles (NPs) loading on the γ-Fe2O3/CuO nanocomposite which was derived from Fe-metal organic framework (Fe-MIL-88B) and Cu-metal organic framework (Cu (tpa)) was introduced. The catalytic and photocatalytic activities of Ag–Pt loading on the γ-Fe2O3/CuO nanocomposite were performed for a reduction process (4-nitrophenol (4-Nip) to 4-aminophenol (4-Amp)), and decomposition organic dyes (AB92, MB) in the LED light. Metal-organic framework (MOFs) composed with inorganic and organic linker which used as suitable precursors to obtain different type of nanostructures for environmental applications.... 

Rare earth oxides with a trivalent nature play a pivotal role in reinforcing the magneto-optical attributes of spinel ferrite nanoparticles by replacing Fe3+ ions. In this study, rare earth Gd oxide doped with CoFe2O4 NPs with a composition of Co1+xGdxFe2-2xO4 (x = 0, 0.05, 0.10, and 0.15) were synthesized using sol-gel auto-combustion. The outcome of Gd cations on the physical, magneto-optical and electrical characteristics of the cobalt ferrite NPs were reported. X-ray diffraction (XRD), and Fourier transform infrared (FTIR) investigations confirmed the single-phase cubic crystalline nature and metal ion stretching in the cobalt ferrite synthesized samples. Decreasing drift in the average...