Sharif Digital Repository

The noise performance of intensity-modulation direct-detection microwave photonic links (MWPL) operating under large-signal conditions has been studied in this paper. A sinusoidal signal plus narrow-band white Gaussian noise is applied at the radio frequency input of the link, and the output spectrum is derived using a nonlinear analytical approach. We show that the output SNR can be severely affected by the interaction of signal and noise due to the nonlinearity of the MWPL combined with the large input modulating signal. It is shown that the large-signal noise figure (NF) of an MWPL depends on the input power, a dependence that is not readily apparent under small-signal conditions, due to... 

Parameter extraction of the five-parameter single-diode model of solar cells and modules from experimental data is a challenging problem. These parameters are evaluated from a set of nonlinear equations that cannot be solved analytically. On the other hand, a numerical solution of such equations needs a suitable initial guess to converge to a solution. This paper presents a new set of approximate analytical solutions for the parameters of a five-parameter single-diode model of photovoltaic (PV) cells and modules. The proposed solutions provide a good initial point which guarantees numerical analysis convergence. The proposed technique needs only a few data from the PV current-voltage... 

In this paper, the reactive power control of a variable-speed permanent-magnet synchronous wind generator with a matrix converter at the grid side is improved. A generalized modulation technique based on singular value decomposition of the modulation matrix is used to model different modulation techniques and investigate their corresponding input reactive power capability. Based on this modulation technique, a new control method is proposed for the matrix converter which uses active and reactive parts of the generator current to increase the control capability of the grid-side reactive current compared to conventional modulation methods. A new control structure is also proposed which can... 

In this paper, a new simple and complete technique of modeling and analysis of a matrix converter is presented based on the singular value decomposition (SVD) of modulation matrix. The proposed modeling method yields a new limitation between the matrix converter gain and its input power factor, which is more relaxed as compared to the limits reported so far in the literature. The SVD of the modulation matrix leads to a unified modulation technique which achieves the full capability of a matrix converter. It is shown that this approach is general and all other modulation methods established for a matrix converter are specific cases of this technique. The proposed modulation method can be used... 

In this paper, we design a dimming compatible visible light communication (VLC) system in a standard office room according to illumination standards under channel constraints. We use overlapping pulse position modulation (OPPM) to support dimming control by changing the code weights. The system parameters such as a valid interval for dimming together with an upper bound for bit rate according to the channel delay spread are investigated. Moreover, considering the dispersive VLC channel and using Monte Carlo (MC) simulations, a method is proposed to determine the minimum code length in different dimming levels in order to achieve a valid bit error rate (BER). Finally, trellis coded modulation... 

Influences of the tip mass, excitation mode of Frequency Modulated Atomic Force Microscope (FM-AFM) on the resonance frequency shift in force modulation (FM) mode are studied. Governing equations of motion are determined based on Timoshenko beam model with concentrated end mass. Approach point and base amplitude are set such that the FM-AFM remains just in FM mode. Either the linearized and nonlinear Derjaguin-Muller-Toporov (DMT) model are investigated. Then frequency shifts are determined for various interaction force regimes. It is showed the effect of tip mass on frequency shift is significant even for small tips. Nonlinear model shows lower frequency shifts in comparison with linearized... 

In this paper we generalize Tannakian formalism to fiber functors over general tensor categories. We will show that (under some technical conditions) if the fiber functor has a section, then the source category is equivalent to the category of comodules over a Hopf algebra in the target category. We will also give a description of this Hopf algebra using the notion of framed objects. © 2017 Akadémiai Kiadó, Budapest, Hungary  

We propose and theoretically and experimentally demonstrate a novel tunable spurious-free single-loop optoelectronic oscillator (OEO) with low drift and low-phase noise. In the proposed transposed-frequency OEO (TF-OEO), a nonreciprocal bias unit and an optical phase modulator in a fiber Sagnac interferometer function jointly as an intrinsically drift-free intensity modulator, which improves the long-term drift. Besides, a transposed-frequency low-noise filtered amplifier is used which replaces the conventional radio frequency (RF) bandpass filter (BPF) and RF amplifier with an intermediate frequency (IF) BPF, an ultralow phase noise IF amplifier, and a tunable local oscillator, to attain... 

Influences of the tip mass, excitation mode of Frequency Modulated Atomic Force Microscope (FM-AFM) on the resonance frequency shift in force modulation (FM) mode are studied. Governing equations of motion are determined based on Timoshenko beam model with concentrated end mass. Approach point and base amplitude are set such that the FM-AFM remains just in FM mode. Either the linearized and nonlinear Derjaguin-Muller-Toporov (DMT) model are investigated. Then frequency shifts are determined for various interaction force regimes. It is showed the effect of tip mass on frequency shift is significant even for small tips. Nonlinear model shows lower frequency shifts in comparison with linearized... 

In trasformerless grid-connected photovoltaic (PV) systems, common-mode voltage (CMV) fluctuations cause leakage current flow through the stray capacitance of the PV panels. Shoot-through states in a quasi-Z-source inverter (q-ZSI) increase the amplitude of high-order harmonics of CMV. In this paper, by using the modulation technique based on odd pulse width modulation and minor change in the Z network of the three-phase q-ZSI, the leakage current is blocked. No extra semiconductor element is added. By the proposed technique, CMV is kept nearly constant during switching cycles. The experimental results for CMV analysis in a 1kW prototype are presented to verify the theoretical analysis. ©... 

Light propagation in turbid media, such as biological tissues, experience scattering due to inhomogeneous distribution of refractive indices. Control of light scattering is important for focusing the light or imaging through scattering medium. By spatially shaping the wave-front of the incident beam, using spatial light modulator (SLM), the scattered light can be focused to a point. Iterative optimization is a popular way of obtaining the most optimum phase map on the SLM. In this study, we implement six optimization algorithms including continuous sequential, partitioning algorithm, transmission matrix estimation method, genetic algorithms, particle swarm optimization, and simulated... 

Metal–organic frameworks (MOFs) are best known for their great structural diversity. The uniformity in the properties of MOFs is mainly governed by the size and morphology of the particles. In the present research, iron-MIL-88A was prepared by a modulator-assisted solvothermal method, and the role of modulating agents in the formation process of MOF particles was investigated. Acetic acid and formic acid were chosen as monoligand modulating agents. The changes in morphology and size distribution of the products were scrutinized by using SEM micrographs. Both modulators clearly interfered with the crystallization process through their attachment to the reactive sites. At low modulator... 

Sigma-Delta modulator ADCs used in signal processing applications are usually implemented by switched-capacitor (SC) circuits and CMOS transmission gates. Clock feed-through effect is one of the main non-ideal parameters existing in SC integrators degrading modulator total SNDR and its linearity. In this paper, a comprehensive analysis of clock feed-through effect on CMOS transmission gates on both rising and falling edges on output node will be presented. The main interferer parameters such as clock signal timing model, input signal level and switch parameters effect on output error will be analyzed. Finally, circuit simulations using 0.18um CMOS technology in ADS environment show the... 

The growth of intelligent attacks has prompted the designers to envision the intrusion detection as a built-in process in operating systems. This paper investigates a novel anomaly-based intrusion detection mechanism which utilizes the manner of interactions between users and kernel processes. An adequate feature list has been prepared for distinction between normal and anomalous behavior. The method used is introducing a new component to Linux kernel as a wrapper module with necessary hook function to log initial data for preparing desired features list. SVM neural network was applied to classify and recognize input vectors. The sequence of delayed input vectors of features was appended to... 

We recruit basic properties of Fourier transformation to realize an electrically tunable delay line and increase the delay by creating a loop in the structure. The proposed method has been experimentally tested and verified for up to 5 roundtrips. The relative delay/advancement was increased up to 5 times compared to the original setup while preserving the original setup's advantages. © VDE VERLAG GMBH  

In this paper, the problem of routing, modulation level, core, and spectrum assignment (RMCSA) in space-division-multiplexed elastic optical networks (SDM-EONs) is studied. We formulate this problem as a mixed-integer linear programming (MILP), in which dedicated and shared path protection schemes are supported in SDM-EONs with multi-core fibers (MCFs) and the inter-core crosstalk of MCFs is strictly modeled. Furthermore, an efficient heuristic algorithm is proposed to solve the RMCSA problem in a large scale scenario. Numerical results reveal that the formulated MILP leads to lower spectrum usage compared to the alternative methods. Moreover, the proposed heuristic algorithm performs close... 

In this work, sweeping gas membrane distillation (SGMD) process was used for concentrating of glucose syrup. The main questions in this work include: is SGMD process practical for concentrating of glucose solution prior the fermentation step in bioethanol process?. and are the commercially available hydrophobic membranes sufficient enough to develop the SGMD process in pilot scale for this issue?. To answer these questions, SGMD process was performed using three commercial membranes made of PP, PVDF and PTFE. All membranes characterized using scanning electron and atomic force microscopes for their morphological and topographical features. Important operating parameters including feed... 

In this paper, we analyze the performance of a wireless infrared system with code division multiple access (CDMA) technique using optical orthogonal codes (OOCs). Performance improvement is shown when power control is applied to the system. Noting the advantages of pulse position modulation (PPM), we have used chip-level binary PPM scheme. To mention some of these advantages we can name average required power reduction and BER improvement in comparison to on-off keying (OOK). The obtained results show that power control is a mandatory part of the design in a wireless infrared system using OOC. ©2007 IEEE  

In the IEEE 802.1D standard for the Media Access Control layer (MAC layer) bridges, there is an STP (Spanning Tree Protocol) definition, based on the algorithm that was proposed by Radia Perlman. In this paper, we give a formal proof for correctness of the STP algorithm by showing that finally a single node is selected as the root of the tree and the loops are eliminated correctly. We use formal inductive reasoning to establish these requirements. In order to ensure that the bridges behave correctly regardless of the topology of the surrounding bridges and LANs, the Rebeca, modular verification techniques are applied. These techniques are shown to be efficiently applicable in model checking... 

The effect of the superconductivity transition on the thermal crosstalk in YBa 2Cu 3O 7-x, edge-transition bolometer arrays is investigated for DC to midrange modulation frequency infrared radiation. The bolometers in the arrays were designed with various distances on SrTiO 3 (100) substrates. We have observed a change in the thermal crosstalk between neighbor devices through the superconductivity transition temperature range. Superconductivity transition dependence of the thermal coupling between the devices was measured by utilizing the thermal conductance measurement methods developed for the bulk material. The knee points in the magnitude of the response versus modulation frequency...