Sharif Digital Repository

Polypropylene (PP) is a fast growing polymer, particularly in automotive industry, where PP compounds have replaced many different parts made of conventional materials. In the first step, PP-g-MA, as compatibilizer, was synthesized. Two kinds of polypropylenes including a homo- and a block co-polymer were incorporated for this goal. Characterizations via titration and FTIR tests revealed higher degree of grafting reaction when homo-polymer was used for synthesizing PP-g-MA. In the next step, nanocomposites containing 3 wt% nanoclay with three different PP-g-MA/nanoclay ratios of 1:1, 2:1 and 3:1were made using a co-rotating twin screw extruder. Tensile, impact and XRD tests were performed to... 

Medical engineering advances in total joint replacements and society’s rising demand for long lasting materials, have proven it essential to manufacture materials that are more similar to the original tissue in the fields of mechanical, tribological and biological properties. Ultra High Molecular Weight Polyethylene(UHMWPE), is a polymer widely used in arthroplasty applications due to its biocompatibility, chemical stability and proper mechanical properties. In this study, UHMWPE-HAp nanocomposites reinforced with Zirconia and Graphene were manufactured aiming to reach a structure that is more compatible with bone tissue and also to improve overall properties. First, using ultrasonication... 

In this study insitu Al-Al3Ti-Al2O3 nanocomposite has been fabricated based on thermal decomposition of tialite (Al2TiO5) precursor in aluminium matrix through powder metallurgy method. Also the effect of high energy mechanical milling and hot extrusion on this procedure has been investigated. In the first step nano-structured tialite were synthesized through citrate sol gel methods. Then, different volume fraction of tialte was mixed with aluminium by high energy vibratory milling. The results of X-ray differaction analysis, scanning electron microscopy and differential thermal analysis showed that mechanical milling can degrade stability of tialite and cause strain-induced decomposition,... 

Polypropylene block copolymer is used in different industries like pipe productions. This copolymer has proper mechanical properties, specially it has good impact strength, but in some applications it’s elastic modulus (stiffness) is not enough and that leads to some problemes in servise. Nucleating agents influence crystalline structure and properties and also the mechanical properties by controlling the crystallization process. Nanoparticles also have a beneficial effects on physical and mechanical properties. In this study, the effect of adding two types of α-phase nucleating agents (commercial names NA11 and DMDBS) in the form of masterbatch wt 5% with a carrier of polypropylene block... 

Graphene is two dimensional nanomaterial, single layer of carbon atoms that exhibited excellent properties like high electrical conductivity and stiffness, but producing graphene and obtaining a good dispersion of graphene in a polymer matrix is still a major challenge. In this study by using the electrochemical route several graphene with different degree of oxidation produced in different electrolyte medium. According to XRD data, product of electrochemical exfoliation in dilute HNO3 medium includes 50% few-layer graphene (5 layers) and 25% GO and the rest are multi-layer graphene. Nonsolvent induced phase separation method were used to prepare TPU/Graphene nanocomposite. Different methods... 

Ultra-fine and fine-grained aluminum matrix nano-composites were fabricated by friction stir processing (FSP) of 1050 Al alloy sheets containing 6 vol% volume fractions of pre-inserted MMO nanoparticles. Annealed sheets were processed at different rotational (w=800-2000 rpm) and traverse speeds (v-50-200 mm/min). A special design tool (concave shoulder and cylindrical pin with regular threads) without changing the rotation and traveling directions was utilized. It is shown that the best and highest desired mechanical properties of the base metal is attained at w=1600 rpm and v =100 mm/min through one single pass. The structure of grains are changed due to the applied severe plastic... 

Epoxy resins have good mechanical and thermal properties, high chemical resistance and low shrinkage during cure but in spite of these good properties,they are brittle and this limits the usage of them. Adding a second, soft or rigid, phase has been always an effective strategy to improve the toughness of epoxy. Rigid phase used in resins are divided into organic and inorganic. The aim of this study is to increase epoxy toughness, maintaining mechanical properties and study effect of silica and polycarbonate on fracture toughness simultaneously. Mechanical properties including yield strength and elastic modulus are evaluated by pressure test. Additionally fracture toughness and three... 

Epoxy resins are used for a wide number of application due to good stiffness, chemical resistant and dimensional stability. This is the reason of their use as matrix in composite material. The incorporation of a small amount of carbon nanotubes (CNTs) in epoxy increases mechanical properties if nanocomposite have strong interfacial interaction between epoxy and CNTs, fine dispersion of CNTs and high final aspect ratio CNTs. In Noncovalent functionalization by polymer surfactant, CNTs are dispersed in a solvent/surfactant solution by ultra-sonication and then added to epoxy. In this thesis a novel study of toughening and mechanical properties of epoxy/ rubber/ CNT nanocomposite is presented.... 

The main purpose of this research was functionalizing graphene, in order to achieve higher hydrophobicity, and producing nanocomposite of functionalized graphene and titanium dioxide by hydrothermal method, and sequently invastigation on photocatalytic properties of the powders and corrosion properties of EPD coated samples. Graphene oxide was synthesized by improved Hummers method and reduced and sequently was functionalized through the chemical process with hydrazine and octadecylamine respectively. Then the nanocomposite of functionalized graphene-titania was synthesized by use of titanium isopropoxide precursor and its photocatalytic properties were measured. The analysis of the... 

In the present study, TiO2-reduced graphene oxide (T-RGO) nanocomposites were synthesized via various in-situ and ex-situ methods, then their photovoltaic performance was examined as photoanode and mesoporous layers in dye-sensitized Solar Cells (DSSCs) and perovskite Solar Cells (PSCs), respectively. Graphene oxide (GO) was prepared using Hummer’s method with some modifications. Both thermal and hydrothermal processes were used to reduce GO. Structural and optical characterization was analytically demonstrated by subjecting of the obtained materials by several techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman, thermogravimetric analysis (TGA),... 

Sodium-ion batteries are cost-effective rechargeable batteries which have attracted considerable interest in recent years due to the low cost and abundance of sodium resources on the earth. Na3MnCO3PO4 (NMCP) has been identified as a potential cathode material with a high theoretical capacity of 191 mAh g-1. In order to improve the conductivity and electrochemical properties of NMCP, fabrication of NMCP/reduced graphene oxide (rGO) composite is a novel and interesting research goal. Therefore, in the current study, rGO was produced by using modified Hummers method. Then, the kinetics of NMCP formation through hydrothermal process was investigated. Results indicate that the optimum... 

In this study, to synthesize molybdenum disilicide nano powder, mixed powder of Mo and Si were ball milled for 15, 30, 45 and 55 hours. By the results of the analyses, milled powders for time intervals of 55 hours were heat treated to release the stresses. This process was carried out in an argon vacuum tube furnace at 1000˚C for 1 hour. XRD analysis was carried for sample. Finally, MoSi2 powder with 86.62 nm crystallite size was used as reinforcement. Cu-MoSi2 composite powder with 2, 3, 5wt% were produced. Cu-MoSi2 with 2wt% reinforcement was milled for 60 hours. Powder composite was compacted by Spark Plasma Sintering . Microstructure of composite was investigated by scanning electron... 

Lead-containing solder alloys in particular Sn-37Pb is the most common alloy used in electronics industry, this alloy has the good mechanical properties and excellent wetting properties and low prices. Recently, increasing environmental and health concerns over the toxicity of lead combined with strict legislation to ban the use of lead-based solders have provided an inevitable driving force for the development of lead-free solder alloys. A group of these lead-free solders are nanocomposite solders that because of having the reinforcement nano particles exhibit lots of unique properties, such as good mechanical and thermal properties. The aim of this research produce a new tin base... 

Titanium nitride-carbon nanocomposites are synthesized by the reaction of TiCl4 and NaN3 in supercritical benzene medium that also serves as a carbon source. In order to improve the crystallinity of the as-prepared precursor (SI), it is further heat-treated at 1000 ˚C for 3-10 h using anhydrous ammonia and UHP nitrogen atmospheres at 1000 ˚C (SIII-SV). Moreover, to improve electrochemical behavior, the synthesized nanocomposite (SIV) is modified with Pt nanoparticles using a polyol process. For better understanding of synthesized catalyst nature and justifying their variant ORR activity several analyses are done. X-ray diffraction (XRD), Raman spectrum, field emission scanning electron... 

The aim of this thesis was creating Titania/RGO coating with electrophoretic method to evaluate the corrosion resistance of stainless steel 316. At first Graphene Oxide were synthesized with modified Hammers method and their physical, chemical and morphological properties have been investigated using XRD, FTIR, EDX, TGA, UV-Vis and Raman analysis. then Graphene Oxide was added to the bath of titanium and was deposited on 316 stainless steel substrates. Moreover, corrosion protection of coating has been examined using Poarization test and Electrochemical Impedance Spectrometry. The effect of deposition parameters on corrosion properties of composite coatings were examined. The key variables... 

In recent years, investigation of mechanical properties of micro- and nano-structure materials, and peculiarly nanocomposites have been attracted a wide variety of researches. In this regard, friction-stir-processed (FSPed) metal matrix nanocomposites have been considered an important case with appropriate mechanical properties especially for fabrication of ultra-fine grained Al alloys and Al-matrix nanocomposites. In this research, Al matrix hybrid nanocomposites were fabricated via multi passes-friction stir processing (FSP) of Al-Mg alloy (AA5052) with different amounts (~2 and 3 vol%) of pre-placed TiO2 (30 nm) particles nanoparticles. It was revealed that employing of cumulative FSP up... 

The aim of this research was to fabricate an in-situ Al-Al3Ti nanocomposite from pure microsized aluminum and titanium powders by mechanical alloying and hot extrusion without any usage of nanometric particles or applying secondary heat treatments. The focus of the present research was fabricating a nanocomposite material with high strength, modulus and hardness accompanied with high fracture toughness that could be comparable with aluminum alloys in terms of fracture toughness. Mechanical alloying and hot extrusion techniques were employed to produce in-situ fully dense Al-Ti composites. Platenary and high energy vibratiory mill was used to produce composites with different percent of... 

In the presented research, feasibility of producing hybrid nano-composite on the surface of Al1050 with TiO2 (~15 nm) and Graphite (~100 μm) reinforcement particles via Friction Stir Processing (FSP) has been investigated. 1.93%, 1.68% and 1.44% are the weight percentage of added reinforcement particles in the nano-composite. Rotational and travelling speeds (and their ratio, ω/v) and volume fraction of the embedded reinforcement particles, mentioned as variable parameters in this research. Despite, effect of these parameters on the microstructural evolution and mechanical properties such as strength, hardness and wear, were studied. Results in the ratio of Gr/TiO2 = 1/3, revealed that by... 

Epoxy resins are relatively brittle and have low resistance to crack propagation. It is common to add rubber particles to improve crack resistance in epoxies, although these particles may deteriorate the strength of the matrix. Different nanomaterials are used to overcome the inherent brittleness of epoxies and to keep the mechanical properties. Among them, carbon nanotubes has been attracted many attentions. Fractue behavior and mechanical properties of two kind of novel nanocomposites, i.e, epoxy/carbon nanotube and epoxy/rubber/carbon nanotube are investigated in current study. Electron microscopy investigations were done to assure the CNTs distribution and fracture mechanisms as well.... 

Polymer/layered silicate nanocomposites are good candidates to improve polymer matrices due to enhanced interfaces between nanoclay reinforcement and matrix. So many attempts has been done to improve fabrication methods of these nanocomposites. Polypropylene is a common used engineering material in many industrial applications (general and special). So there is many researches focused on PP/Clay nanocomposites. In this research we tried to investigate the role of clay loading, compatibilizer loading and processing sequence on clay delamination and layer dispersion. We used a blend of two different PPs with different MFI values as matrice. It seems that the blend achieves acceptable...