Sharif Digital Repository

In this research, the effects of crosslinking agent and clay content on the morphology, barrier and mechanical properties of ethylene vinyl acetate-organoclay nanocomposites prepared by solution method were studied. Dicumyl peroxide has been used as crosslinking agent. The morphology of the prepared nanocomposites was investigated using wide-angle X-ray diffraction and transmission electron microscopy. Wide-angle X-ray diffraction and transmission electron microscopyindicated that the prepared nanocomposites had predominantly intercalated morphologies. The obtained results of permeability tests showed that the permeability of ethylene vinyl acetate films dramatically decreases with addition... 

A novel Fe3O4-poly(aniline-naphthylamine)-based nanocomposite was synthesized by chemical oxidative polymerization process as a magnetic sorbent for micro solid phase extraction. The scanning electron microscopy images of the synthesized nanocomposite revealed that the copolymer posses a porous structure with diameters less than 50nm. The extraction efficiency of this sorbent was examined by isolation of rhodamine B, a mutagenic and carcinogenic dye, from aquatic media in dispersion mode. Among different synthesized polymers, Fe3O4/poly(aniline-naphthylamine) nanocomposite showed a prominent efficiency. Parameters including the desorption solvent, amount of sorbent, desorption time, sample... 

This investigation focused on a comparison between hydroxyapatite (HA) and carbon-nanotube-reinforced hydroxyapatite composite (CNTs/HA) coatings. The HA and CNTs/HA composite (with 5wt% CNTs) coatings were prepared with the sol-gel method on 316L stainless steel. Phase evaluation by means of XRD and Raman spectroscopy was performed on the HA and CNTs/HA composite coatings. The coatings were immersed in simulated body fluid (SBF) in order to evaluate the biological properties of the coatings. During the first week of immersion, the increase in the amount of Ca2+ precipitation in the SBF when CNTs/HA was used was lower than for the HA coatings. This behavior can be related to the difference... 

Charpy impact energy of the produced Al6061-SiCp laminated nanocomposites by mechanical alloying was modeled by adaptive neuro-fuzzy interfacial systems (ANFIS) in both crack divider and crack arrester configurations. The model was constructed by training, validating and testing of 171 gathered input-target data. The thickness of layers, the number of layers, the adhesive type, the crack tip configuration and the content of SiC nanoparticles were five independent input parameters utilized for modeling. The output parameter was Charpy impact energy of the nanocomposites. The performance of the proposed models was evaluated by absolute fraction of variance, the absolute percentage error and... 

Magnetic Fe3O4@SiO2 starch-graft-poly(acrylic acid) (SPAA) nanocomposite hydrogels were prepared and used as absorbents for removal of crystal violet from aqueous solutions. Dynamic swelling, effect of contact time, absorption kinetics and nanocomposite hydrogel mass for removal of crystal violet dyes from aqueous solutions were studied. Fourier transform infrared spectroscopy, scanning electron microscopy and vibrating sample magnetometer measurements were used for the characterization of the nanocomposite hydrogels. The nanocomposite hydrogels had high magnetic sensitivity under an external magnetic field, which allowed their magnetic separation from water, thus avoiding secondary... 

Polyvinylidene fluoride magnetic nanocomposite films were prepared by solution casting using two types of magnetic nanoparticles: (a) magnetic nanoparticles synthesized by co-precipitation method using oleic acid as a coating agent and (b) Fe3O4 nanoparticles prepared by hydrolysis method without using a coating agent. Dynamic light scattering measurements showed mean diameters of 135 and 46 nm in co-precipitation and hydrolysis methods, respectively. Scanning electron microscopy showed that the magnetic nanoparticles were uniformly dispersed inside the polymer matrix. X-ray diffraction confirmed that Fe3O4 nanoparticles induced nucleation of β- crystalline phase in the matrix polymer. The... 

TiO2-graphene (TiO2-GR) nanocomposites were synthesized using photocatalytic reduction method. TiO2-GR nanocomposites were thereafter doped with noble metals (Pt and Pd) by chemical reduction of the corresponding cations. The samples were characterized by different techniques. The addition of GR to TiO2 decreases the crystalline size of TiO2 due to the homogeneous dispersion of the TiO2 nanoparticles on GR sheets and prevention of coagulation of TiO2 nanoparticles during synthesis process. In addition, the surface area of TiO2 was increased by addition of GR and deposition of noble metals which helps to prevent agglomeration of graphene sheets and TiO 2 nanoparticles. Red shifts to the... 

Poly(ethylene terephthalate) (PET) nanocomposites were prepared through a solution casting method using Multi wall carbon nanotubes (MWCNT) and organically modified montmorillonite (OMMT) as nanoparticles and their morphological and thermal properties investigated. The X-ray diffraction and transmission electron microscopy measurements showed that decreasing the ratio of MWCNT to OMMT for the same amount of OMMT creates better conditions for intercalation of PET macromolecules and promotes the transformation of OMMT nanostructures from the intercalated to exfoliated state. It was concluded that the Ozawa's model was not suitable to interpret the crystallization behavior of the... 

Functionalized magnetic core-zeolitic shell nanocomposites were prepared via hydrothermal and precipitation methods. The products were characterized by vibrating sample magnetometer, X-ray powder diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption-desorption isotherms, and transmission electron microscopy analysis. The growth of mordenite nanocrystals on the outer surface of silica-coated magnetic nanoparticles at the presence of organic templates was well approved. The removal performance and the selectivity of mixed metal ions (Pb2+ and Cd2+) in aqueous solution were investigated via the sorption process. The batch method was employed to study the sorption kinetic,... 

We developed a modified straightforward method for the fabrication of uniformly sized silica-coated magnetite clusters core/shell type nanocomposite particles. Proposed simple one-step processing method permits quick production of materials in high yield. The structural, surface, and magnetic characteristics of the nanocomposite particles were investigated by transmission electron microscopy (TEM), scanning electron microscope (SEM), powder X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and Fourier-transform infrared (FTIR). The sphere-shaped particles almost have the average diameter of 120 nm, with a magnetic cluster core of 80 ± 15 nm, and a silica shell of 25 ± 10 nm... 

In the present research, the introduction of multi-walled carbon nanotubes (MWCNTs) into the hydroxyapatite (HA) matrix and dip coating of nanocomposite on titanium alloy (Ti-6Al-4V) plate was conducted in order to improve the performance of the HA-coated implant via the sol-gel method. The structural characterization and electron microscopy results confirmed well crystallized HA-MWCNT coating and homogenous dispersion of carbon nanotubes in the ceramic matrix at temperatures as low as 500 C. The evaluation of the mechanical properties of HA and HA/MWCNT composite coatings with different weight percentages of MWCNTs showed that the addition of low concentrations of MWCNTs (0.5 and 1 wt.%)... 

In this work the effects of sintering temperature on the hardness, friction and wear characteristics of Al-10Ce-TZP/Al2O3 composites have been investigated. Aluminum and Ce-TZP/Al2O3 nanocomposite were selected as raw materials. Ce-TZP/Al2O3 nanocomposites were synthesized by the aqueous combustion method. 7 wt. % 10Ce-TZP/Al2O3 composites in the form of cylindrical samples were prepared at the sintering temperatures of 400, 450 and 500°C under an applied pressure of 600 MPa for 60 min. Wear tests were carried out using the pin-on-disk method under normal loads of 10 and 20 Kgf at constant sliding velocity of 0.25 m/s. The surfaces of the worn nanocomposite were examined by scanning electron... 

Nanostructured Cu and Cu-2. vol% SiC nanocomposite were produced by high energy mechanical milling and hot pressing technique. Microstructure development during fabrication process was investigated by X-ray diffraction, scanning electron microscope, scanning transmission electron microscope, and electron backscatter diffraction techniques. The results showed that the microstructure of copper and copper-based nanoco mposite composed of a mixture of equiaxed nanograins with bimodal and non-random misorientation distribution. The presence of SiC nanoparticles refined the grain structure of the copper matrix while the fraction of low angle grain boundaries was increased. Evaluation of mechanical... 

Two different hydroxyapatite based composites reinforced by oxide ceramic (20 wt%) nano crystals were synthesized by high-energy ball milling and sintered by pressure less technique. Alumina and titania nanoparticles as secondary phases improved densification and mechanical behavior of apatite and postponed its decomposition to the tricalcium phosphate (TCP) phases at elevated temperatures. Increasing the relative density of apatite using nano reinforcements leads to enhance the bending strength by more than 40% and 27% (as compared to the pure HA) and increase the hardness from 2.52 to 5.12 (Al2O3 composite) and 4.21 (TiO2 addition) GPa, respectively. Transmission electron microscopy (TEM),... 

In this paper, for obtaining an overall size-dependent yield function for nanocomposites containing aligned cylindrical nanofibers, the effects of interface residual stress and interface elasticity are taken into account within a micromechanical framework. Toward this goal, the modified Hill's condition is used, and then, in order to consider effects of the interface residual stress, strains are decomposed into two parts, a part due to the external loadings and the other due to the interface residual stress. Next, utilizing the field fluctuation method, an overall yield function containing effective elastic constants of the material is derived and then simplified for practical loading... 

In this paper, the well-known effective medium approximation (EMA) and coupled dipole approximation (CDA) methods are employed to study the optical properties of a metal nanoparticle-block copolymer (MNP-BCP) nanocomposite. This approach is applied to study a system consisting of small gold spherical nanoparticles randomly distributed in the cylindrical micelles of a di-BCP. At first, the EMA method is used to obtain the effective dielectric function of a semi-metallic cylinder. Then, the extinction spectrum of the hexagonal 2D-array of semi-metallic cylinders is obtained by the CDA method. This procedure makes it possible to study simultaneously both the electromagnetic extinction of MNPs... 

Recent studies have shown that the surface/interface free energy plays an important role in the effective mechanical properties of solids with nanosized inhomogeneity. In the present study, an analytical model is developed for 3D axisymmetric analysis of short fiber nanocomposites including the fiber end region, subjected to an applied axial load considering surface effects. Closed form expressions are obtained for 3D stress filed in the fiber and matrix. Moreover, performing numerical examples, it is shown that the elastic stress field is size dependent in both the fiber and matrix especially for fiber radii less than 50 nm  

A zirconia/alumina nanocomposite stabilized with cerium oxide (Ce-TZP/Al2O3 nanocomposite) can be a good substitute as reinforcement in metal matrix composites. In the present study, the effect of the amount of 10Ce-TZP/Al2O3 particles on the microstructure and properties of Al/(10Ce-TZP/Al2O3) nanocomposites was investigated. For this purpose, aluminum powders with average size of 30μm were ball-milled with 10Ce-TZP/Al2O3 nanocomposite powders (synthesized by aqueous combustion) in varying amounts of 1, 3, 5, 7, and 10wt.%. Cylindrical-shape samples were prepared by pressing the powders at 600MPa for 60min while heating at 400-450°C. The specimens were then characterized by scanning and... 

An ultrafine-grained Al6063/Al2 O3 (0.8vol.%, 25nm) nanocomposite was prepared via powder metallurgy route through reactive mechanical alloying and hot powder extrusion. Scanning electron microcopy, transmission electron microscopy, and back scattered electron diffraction analysis showed that the grain structure of the nanocomposite is trimodal and composed of nano-size grains (<0.1μm), ultrafine grains (0.1-1μm), and micron-size grains (>1μm) with random orientations. Evaluation of the mechanical properties of the nanocomposite based on the strengthening-mechanism models revealed that the yield strength of the ultrafine-grained nanocomposite is mainly controlled by the high-angle grain... 

By combination of 1-ethyl-3-methyl immidazolium ethyl sulfate as a typical room temperature ionic liquid (IL) and graphene oxide (GO) nanosheets, a nanocomposite was introduced for improving the direct electrochemistry and electrocatalytic activity of glucose oxidase (GOx). The enzyme on the IL-GO-modified glassy carbon electrode exhibited a quasireversible cyclic voltammogram corresponding to the flavine adenine dinucleotide/FADH2 redox prosthetic group of GOx. At the scan rate of 100 mV s-1, the enzyme showed a peak-to-peak potential separation of 82 mV and the formal potential of -463 mV (vs Ag/AgCl in 0.1 M phosphate buffer solution, pH 7.0). The kinetic parameters of the charge transfer...