Sharif Digital Repository

Alkalis, surfactants and/or polymers are usually injected in the injector wells so that the injection fluids can sweep through the reservoir and mobilize/recover more oil. However, the formation of stable emulsion due to the residual chemicals in the recovered crude oil poses problems in the primary separation process. This study focuses on the effect of Alkali-Surfactant-Polymer injection on creaming and coalescence of crude oil and water emulsion produced in the primary gravity separator. In addition, a model is developed in this work to predict the separation effectiveness of oil and water emulsion containing ASP. In this work, the effect of ASP on the stability and the separation of... 

Characterization and determination of a complex mixture of fatty acid methyl esters was performed for commercial fish oil using two-dimensional GC-MS data coupled with resolution techniques. Various principle component analysis methods such as significant factor analysis and fixed size moving window evolving factor analysis were used for the number of factors, zero concentration and selective regions. Then, the convoluted chromatograms were resolved into pure chromatograms and mass spectra using heuristic evolving latent projections (HELP) method. Fatty acids of C16:1ω7, C18:4ω3, C18:1ω11, C18:1ω9, C18:0, C20:2ω6, C20:1ω9, C 22:1ω11, C22:1ω9 and C24:1ω9 were resolved and identified by using... 

Refineries are amongst the most energy-intensive and polluting industries in the world. Biotechnology may serve as an alternative low-cost and environmental-friendly tool to the current costly, toxic and hazardous refining processes. In this study, the compositional redistribution of a heavy hydrocarbon cut is investigated under biological conversion using native microbial consortia. The native consortia were obtained by batch enrichment method applied on oil-polluted soil samples from oil refineries of Iran. The bioconversion experiments were conducted with 20% and 40% (v/v) of the heavy cut as the sole carbon source and 10% (v/v) of the consortia broth in 250 ml flasks containing a mineral... 

In this research work, Friction Theory and Free Volume Theory are applied to live oil characterized based on SARA TEST for viscosity modeling and make a new model in combination with two equation of state (PR and PC-SAFT). Parameters for pseudo-components are obtained by tuning the viscosity at atmospheric pressure and temperatures of 10, 20, and 40 ℃. A new fitting approach is suggested where the number of fitting parameters is 17 and 12 for FT and FVT model, respectively. These parameters are tuned using the Genetic Algorithm and Particle Swarm Optimization and make eight new models. The results show that PC-SAFT provides viscosity predictions for all models with less deviation from... 

Most of the heavy oil reservoirs contain discontinuous shale which affects fluid flow through porous media as well as recovery efficiency during enhanced oil recovery processes. However, the role of shale geometrical characteristics (including orientation, length, discontinuity, and spacing of the shale) on oil recovery remains a topic of debate in the literature, especially during miscible injection of heavy oils and five-spot systems. Here, a series of hydrocarbon solvent injection tests have been performed on various five-spot glass micromodels containing barriers which are initially saturated with heavy oil under fixed flow rate conditions. Oil recoveries as a function of pore volumes of... 

This paper is a continuation of our previous paper (part 1; 10.1021/ef401857t), which discussed the roles of different phenomena effecting the deposition of asphaltene from model oil systems and before the onset of asphaltene precipitation. The study in this paper is to understand the depositional tendency of asphaltene using a quartz crystal microbalance with dissipation (QCM-D) measurements and their corresponding modeling for real crude oil systems with emphasis after the onset of asphaltene precipitation  

In recent years, the behavior of crude oil interfacial tension (IFT) as a function of salt concentration have been investigated. The results found in literature are highly controversial, thus the current experimental study aimed to clarify the reasons behind this by developing a methodology based on extracting asphaltene and resin from three different crude oils and performing elemental analysis on them. In addition, the effect of salinity on the IFT of three studied crude oil was compared with the synthetic crude oil consisted of different weight percent (wt%) of asphaltene and resin in toluene. The obtained results revealed that the IFT of crude oil as a function of salinity depended not... 

In this study, heat oil conversion experiments using steam and formic acid as a hydrogen carrier be carried out in a batch reactor at T = 380 degrees of Celsius and P = 165 bar. Material balance and product distribution were calculated after the process. Properties of crude oil before and after thermal conversion, including viscosity, API gravity, SARA measurement, and elemental analysis, were analyzed. It has been presented that the use of formic acid as a hydrogen carrier solvent reduces the formation of coke and gaseous products and enhances the performance of liquid products. Also, the viscosity of the refined oil decreased by 23.2% due to the addition of formic acid compared to the... 

In this paper, a computational technique is presented for the isothermal and non-isothermal water injection into naturally fractured oil reservoirs. A remarkable number of naturally fractured reservoirs contain relatively heavy oils that could not be extracted economically; hence, the thermal recovery methods are extensively used for such reservoirs. In this study, the effectiveness of hot water injection over cold (isothermal) water injection in oil production is quantified. The influence of long and short fractures and their alignments on oil recovery are discussed. To this end, a 2D model for two-phase fluid flow and heat transfer is presented. The medium is assumed to be partially... 

This work aims to discuss the results of wide ranges of laboratory investigations to evaluate the performance of a newly-formulated surfactant for heavy oil reservoirs in order to improve the microscopic sweep efficiency after water flooding processes. In the first part, the specific behavior of the formulated surfactant including its salinity tolerance, interfacial tension, and optimum performance window was determined. Then, the application of surfactant solutions in real sandstone reservoir rocks was assessed for both oil-wet and water-wet cases. Besides, the effect of changing the capillary and viscous forces and interfacial tension on the residual phase saturations were characterized.... 

Nitrogen has emerged as a competitive gas injection alternative for gas-based enhanced oil recovery processes in the past two decades. The injection of nitrogen into the reservoirs has improved the oil recovery efficiency in various oil reservoirs from heavy to volatile oils. As it is known, interfacial tension (IFT) plays a key role in any enhanced oil recovery process, particularly gas injection processes; therefore, its accurate determination is crucial for the design of any gas injection process especially at reservoir condition. In this study, an axisymmetric drop shape analysis (ADSA) was utilized to measure the equilibrium IFTs between crude oil and N2 at different temperature levels... 

Enhanced Oil Recovery techniques are gaining more attention worldwide as the proved oil reserves are declining and the oil price is hiking. Although many giant oil reservoirs in the world were already screened for EOR processes, the main challenges such as low sweep efficiency, costly techniques, possible formation damages, transportation of huge amounts of EOR agents to the fields especially for offshore cases, analyzing micro-scale multi-phase flow in the rock to the large scale tests and the lack of analyzing tools in traditional experimental works, hinder the proposed EOR processes. Our past experiences on using nanotechnology to the upstream cases, especially EOR processes, revealed... 

Immiscible gas injection is one of the most common enhanced oil recovery methods used under various reservoir conditions. In this work, the immiscible recycle gas injection, as an EOR scenario for improving recovery efficiency in one of the south-west Iranian oil reservoirs, is simulated by a commercial simulator, ECLIPSE. The reservoir fluid is light oil, with an API of 43. The oil bearing formations are carbonate, and so a dual porosity/dual permeability behavior was chosen for better representation of the fracture system. Different sensitivity analyses with respect to several parameters like the number and location of injection/production wells, production/injection rate, completion... 

Molecular diffusion of gases in crude oils plays a crucial role in several oil recovery processes especially in cold-based production process. However, experimental data concerning CO2 diffusivity in heavy oils due to the tedious nature of diffusivity measurements are relatively rare in the open literature. In this work, a comprehensive experimental investigation of the effective molecular diffusion determination of CO2-heavy oil systems in homogeneous porous media was studied. The so-called pressure decay method was applied to measure the molecular diffusivity of carbon dioxide in heavy oil. Furthermore, effect of various parameters such as initial pressure, temperature and porous media on... 

Nitrogen has been appeared as a competitive gas injection alternative for gas-based enhanced oil recovery (EOR) processes. Minimum miscibility pressure (MMP) is the most important parameter to successfully design N2 flooding, which is traditionally measured through time consuming, expensive and cumbersome experiments. In this communication, genetic programming (GP) and constrained multivariable search methods have been combined to create a simple correlation for accurate determination of the MMP of N2-crude oil, based on the explicit functionality of reservoir temperature as well as thermodynamic properties of crude oil and injection gas. The parameters of the developed... 

This work aims to discuss the results of wide ranges of laboratory investigations to evaluate the performance of a newly-formulated surfactant for heavy oil reservoirs in order to improve the microscopic sweep efficiency after water flooding processes. In the first part, the specific behavior of the formulated surfactant including its salinity tolerance, interfacial tension, and optimum performance window was determined. Then, the application of surfactant solutions in real sandstone reservoir rocks was assessed for both oil-wet and water-wet cases. Besides, the effect of changing the capillary and viscous forces and interfacial tension on the residual phase saturations were characterized.... 

Application of solar energy compared to conventional gas-burning boilers for steam generation in thermal Enhanced Oil Recovery processes is a newly attended technology, which brings significant benefits to the petroleum industry through environmental and economical aspects. This technique is especially designed for the regions in which gas-burning steam generation is not viable in large scale. The objective of this study is to investigate about viability of using solar energy to generate steam instead of using conventional steam generators in a Venezuelan extra heavy oil reservoir. Limited gas production policy of the Venezuelan government is the major challenge for utilizing gas steam... 

In order to maintain the production of offshore oil wells, the National Iranian Oil Company periodically services facilities and equipment located in oil wellheads with mobile wellhead servants. It also gives technical supports to oil wellheads and mobile wellhead servants with supporter vessels. Due to supply limitations, there are not enough special vessels (namely supporter vessels and mobile wellhead servants) compared to the number of oil wellheads. The failure of special vessels to service oil wellheads and supporter vessels to technically support mobile wellhead servants based on a predetermined plan, will lead to considerable loss in production performance of oil wells and hence...