Sharif Digital Repository

Sintering is the most critical step in manufacturing of functional parts by co-powder injection molding. In the present work, we studied the sintering phenomena occurring during co-sintering of metal/ceramic composite layers. Nanostructured yttria-stabilized zirconia (3Y-TZP) was co-sintered with 430L stainless steel and chromium. The sintering response was studied by dilatometer analysis in isothermal and non-isothermal modes. The microstructure of the sintered specimens was studied by scanning electron microscopy (SEM), electron-probe microanalysis (EPMA) and micro-focused X-ray diffraction (MFXRD). The strength of the joint was also determined by a shear-punch method. It is shown that... 

Manufacturing of complex-shaped bimetals utilizing two-color powder injection molding (2C-PIM) and three-dimensional printing (3DP) processes, which basically involve sintering of a powder/binder mixture, has been attracted a great interest. This article addresses sintering of biocompatible Co-Cr-Mo alloy for manufacturing stepwise porosity-graded composite structures. Such composite structures provide strength at the core and a porous layer for the tissue growth. To evaluate the process, two grades of gas atomized Co-Cr-Mo powder with an average particle size of 19 and 63 μm were used. Isothermal and non-isothermal sintering behavior of the loose powders under hydrogen and argon... 

Manufacturing of complex-shaped bimetals utilizing two-color powder injection molding (2C-PIM) and three-dimensional printing (3DP) processes, which basically involve sintering of a powder/binder mixture, has been attracted a great interest. This article addresses sintering of biocompatible Co-Cr-Mo alloy for manufacturing stepwise porosity-graded composite structures. Such composite structures provide strength at the core and a porous layer for the tissue growth. To evaluate the process, two grades of gas atomized Co-Cr-Mo powder with an average particle size of 19 and 63 μm were used. Isothermal and nonisothermal sintering behavior of the loose powders under hydrogen and argon atmospheres... 

Using the skin tissue engineering approach is a way to help the body to recover its lost skin in cases that the spontaneous healing process is either impossible or inadequate, such as severe wounds or burns. In the present study, chitosan/gelatin-based scaffolds containing 0.25, 0.5, 0.75, and 1% allantoin were created to improve the wounds’ healing process. EDC and NHS were used to cross-link the samples, which were further freeze-dried. Different in-vitro methods were utilized to characterize the specimens, including SEM imaging, PBS absorption and degradation tests, mechanical experiments, allantoin release profile assessment, antibacterial assay, and cell viability and adhesion tests.... 

Open-pore titanium scaffolds were fabricated by sintering of compressed mixtures of TiH1.924 and urea. Spherical and irregular shaped space holders were used to investigate the effect of pore shape on cellular behavior. After removal of the space holder, the shape of the spacers was replicated to the pores. Average diameter of the pores was in the range of 300-600 lm. SEM images showed that titanium hydride resulted in higher surface roughness and larger micro porosities than pure titanium. In vitro evaluationswere carried out by using MTT assay, measuring alkaline phosphatase activity and alizarin red staining in flow perfusion bioreactor for cell culture. Observations revealed excellent... 

Tungsten composites are interesting materials for high temperature applications. These composites are conventionally produced by solid state reaction, where elevated temperatures and long sintering processes are inevitable, and generally produce volatile components that increase defects and impair the properties of the composites for high temperature applications. In the present paper, synthesis of dense near net-shaped transition metal-metal carbide by reaction casting is studied, which creates a potential application for the composite at 2000 C. Since the pores of the ceramic preform are filled with reaction products, this technique is referred to as displacive compensation porosity (DCP).... 

Three distinct methods, namely, the spectral density, the multifractal random walk approach, and the multifractal detrended fluctuation analysis are utilized to study the properties of four distinct types of well logs from three oil and gas fields, namely, the natural gamma ray emission, neutron porosity, bulk density, and the sonic transient time logs. Such well logs have never been analyzed by the methods that we utilize in the present study. The results indicate that the well logs exhibit multifractal characteristics, and the estimated Hurst exponents by the three methods are close to each other. Using multifractal detrended fluctuation analysis and the shuffled and surrogated data, we... 

Three distinct methods, namely, the spectral density, the multifractal random walk approach, and the multifractal detrended fluctuation analysis are utilized to study the properties of four distinct types of well logs from three oil and gas fields, namely, the natural gamma ray emission, neutron porosity, bulk density, and the sonic transient time logs. Such well logs have never been analyzed by the methods that we utilize in the present study. The results indicate that the well logs exhibit multifractal characteristics, and the estimated Hurst exponents by the three methods are close to each other. Using multifractal detrended fluctuation analysis and the shuffled and surrogated data, we... 

We carry out a series of cross-correlation analysis of raw well-log data, in order to study the possible connection between natural gamma ray (GR) logs and other types of well logs, such as neutron porosity (NPHI), sonic transient time (denoted usually by DT), and bulk density (RHOB) of oil and gas reservoirs. Three distinct, but complementary, methods are used to analyze the cross correlations, namely, the multifractal detrended cross-correlation analysis (MF-DXA), the so-called Qcc(m) test in conjunction with the statistical test-the χ2(m) distribution-and the cross-wavelet transform (XWT) and wavelet coherency. The Qcc(m) test and MF-DXA are used to identify and quantify the strength of... 

Gas condensate production using technology of multi-stage hydraulically fracturing in shale gas condensate reservoirs' horizontal wells is a new topic of unconventional resources studies. Thus, shale gas condensate as a new source of energy can be considered as an important issue for development and further studies. In this work, a semi-analytical solution of gas and oil two-phase flow is presented for pressure transient analysis (PTA) and rate transient analysis (RTA) of a shale gas condensate reservoir's production data. Fluid flow assumption here is flow in a pseudo triple-porosity porous media, which are matrix, natural fractures and adsorbed gas. Adsorbed gas is a form of gas in porous... 

The process kinetics of a lab-scale upflow aerobic immobilized biomass (UAIB) reactor using simulated sugar-manufacturing wastewater as feed was investigated. The experimental unit consisted of a 22 l reactor filled with high porosity pumice stone. The UAIB reactor was tested under different organic loads and different hydraulic retention times (HRT) and the substrate loading removal rate was compared with prediction of Stover-Kincannon model, second-order model and the first order substrate removal model. After obtaining steady-state conditions, organic loading rate was increased from 750 to 4500 g COD/m3 day to resemble wastewater from sugar production lines, and hydraulic retention time... 

In this article, dynamic core flood experiments in miscible CO2 condition were carried out to investigate core damage due to asphaltene deposition. Carbonate and sandstone cores were used to study of effect of core characteristic on permeability and porosity reduction. The experimental results show asphaltene deposition preferentially in sandstone core type takes place in the first half of the core while in the carbonate one it occurs in the second half. In spite of asphaltene content measurement results (IP-143) that show higher asphaltene deposition in sandstone cores, permeability impairment compared to the carbonate one is severe. Also, permeability-porosity reduction models are affected... 

To describe immobilized cells in porous microcapsule membranes with straight pores, a novel model called corrugated parallel bundle model (CPBM) was utilized. In this model, a network was developed with 10 main pores each composing 10 pore elements. Cell growth kinetic in the network was examined using non-structural models. Effectiveness factor and pore plugging time were calculated by solving reaction-diffusion equation set via finite difference method. The findings revealed that diffusion coefficient for lower order reactions will create a lesser impact on the reduction of effectiveness factor. These findings also indicated that the use of such supporting carrier for cell immobilization... 

Rock samples from the Asmary outcrop formation of the Ahwaz oil rich zone with a porosity of 16% and permeability of 1 md and MIS crude oil with an API value of 42.5 and moderate asphaltene content of 3%, were used to study the effect of the incubation time and flow rate of the displacing fluid in MEOR operations. Five species of rod shaped, gram positive, thermophile and facultative bacteria were isolated and purified from the crude. Due to the high sweep efficiency prevailing in the core flooding system, the effect of the displacing brine flow rate on the oil recovery efficiency was found not to be significant. On the other hand, a 100% increase in incubation time from 7 to 14 days... 

Monitoring conformational changes in ion channels is essential to understand their gating mechanism. Here, we explore the structural dynamics of four outer membrane proteins with different structures and functions in the slowest nonzero modes of vibration. Normal mode analysis was performed on the modified elastic network model of channel in the membrane. According to our results, when membrane proteins were analyzed in the dominant mode, the composed pores, TolC and α-hemolysin showed large motions at the intramembrane β-barrel region while, in other porins, OmpA and OmpF, largest motions observed in the region of external flexible loops. A criterion based on equipartition theorem was used... 

Whole level of the erosion and the resistance of rocks which were composed closured have been studied, besides, the impact of temperature and laser irradiation for more investigation about this issue has been involved before all. This subject more reveals the matter which laser absorption on the laboratory scale using laser to what extent can cause the augment of the relative permeability and secondary porosity of reservoir rock, that of the vertical and horizontal useful connectivity and eventually that of the positive transferability. This research has been carried out in the form of case study on one of Iranian south west formations in north east of Behbahan city in Iran, either the rate... 

Accurate estimation of the reservoir parameters is crucial to predict the future reservoir behavior. Well testing is a dynamic method used to estimate the petro-physical reservoir parameters through imposing a rate disturbance at the wellhead and recording the pressure data in the wellbore. However, an accurate estimation of the reservoir parameters from well-test data is vulnerable to the noise at the recorded data, the non-uniqueness of the obtained match, and the accuracy of the optimization algorithm. Different stochastic optimization methods have been applied to this address problem in the literature. In this study, we apply the recently developed iterative ensemble Kalman filter in the... 

Accurate estimation of the reservoir parameters is crucial to predict the future reservoir behavior. Well testing is a dynamic method used to estimate the petro-physical reservoir parameters through imposing a rate disturbance at the wellhead and recording the pressure data in the wellbore. However, an accurate estimation of the reservoir parameters from well-test data is vulnerable to the noise at the recorded data, the non-uniqueness of the obtained match, and the accuracy of the optimization algorithm. Different stochastic optimization methods have been applied to this address problem in the literature. In this study, we apply the recently developed iterative ensemble Kalman filter in the... 

New studies regarding the sorption of fluids by solids are published every day. In performance testing, after the sorbent has reached saturation, it is usually removed from the sorbate bath and allowed to drain. The loss of liquid from the sorbents with time is of prime importance in the real-world application of sorbents, such as in oil spill response. However, there is currently no equation used for modeling the unsteady state loss of the liquid from the dripping sorbent. Here, an analytical model has been provided for modeling the dynamic loss of liquid from the sorbent in dripping experiments. Data from more than 60 sorbent-sorbate systems has been used to validate the model. The... 

S-doped TiO2 layers were grown on titanium substrates by MAO process. SEM results revealed a porous morphology with a pore size of 40-100 nm. Our XRD analysis showed that the anatase relative content reached its maximum value at the voltage of 500 V. The existence of sulfur in the states of S 4+ and S6+ which substituted Ti4+ in the titania crystalline lattice was confirmed by XPS results; meanwhile, no S 2- was detected. That is, a cationic doping was observed. EDS results showed that sulfur concentration in the layers increased with the voltage. The band gap energy was also calculated as 2.29 eV employing a UV-Vis spectrophotometer