Sharif Digital Repository

Smart water flooding as a developing technique utilizes modified water chemistry in terms of salinity and composition to prepare the best-suited brine composition for a specific brine/oil/rock system to obtain higher oil recovery efficiency. Huge amount of unrecovered oil is expected to be remained in carbonate reservoirs; however, few research works on incremental oil recovery during smart water injection in carbonate cores at reservoir condition are reported. Several core flooding tests using one of the Iranian carbonate reservoir rock are conducted to check the effectiveness of smart water injection for more oil recovery efficiency. The results reaffirm the positive effect of sulfate ions... 

This study aims to investigate the role of fluid-fluid interactions during low salinity water flooding, using crude oil from an Iranian oil reservoir. To minimize the effects of mineral heterogeneity and wettability alteration, a synthetic sintered glass core was utilized and all coreflooding experiments were performed at low temperatures without any aging process. The effect of fluid-fluid interactions were investigated in both secondary and tertiary injection modes. pH measurements as well as UV-Vis spectroscopy and interfacial tension (IFT) analysis were performed on the effluent brine samples. Results: show that fluid-fluid interactions, mainly the dissolution of crude oil polar... 

Dam construction in arid and semiarid regions is generally related to the risk of increased salinity, due to water passage in contact with salty formations. Hence, it is important to take reservoir thermal and salinity stratification into account in operational rules. In the present study, a simulation–optimization model was developed to determine the amount of water release from various outlets to discharge the brine from hypolimnion layer considering the downstream water quality limitations. The most appropriate time, rate, and concentration to release brine were determined based on water consumption conditions and downstream water demand and river ecology characteristics. The proposed... 

Utilization of nanoparticles in oil and gas industry has attracted considerable attention of engineers and researchers. In this article, the feasibility of nanoemulsion flooding is investigated as a method for Enhanced Oil Recovery (EOR) through coreflooding experiments, using a packed bed and real reservoir fluids. Nine different mixtures of the solvent, surfactant, and nanoparticles in the form of a nanoemulsion phase are generated and used to recover the oil in the context of an EOR process. Various tests are conducted to determine the properties of porous medium and fluids. To study the production performance of this EOR technique, pressure drop across the packed bed are measured, along... 

Wettability alteration of rock surfaces toward gas wetting have been recognized as a practical approach for maximizing the production from the gas condensate reservoirs. Most of the reported work in this area applied the so called sessile drop contact angle measurement technique to examine the change in wetting state of a surface. However, the size-dependent wetting behavior of drop which could affect the exact determination of wettability and wettability changes was not well discussed in the previous studies. Therefore, in this work, the size dependency of contact angle for four different liquid-solid-gas systems; i.e., water-calcite-air, water-treated calcite-air (nanofluid treated... 

Carbonated water injection (CWI) is known as an efficient technique for both CO2 storage and enhanced oil recovery (EOR). During CWI process, CO2 moves from the water phase into the oil phase and results in oil swelling. This mechanism is considered as a reason for EOR. Viscous fingering leading to early breakthrough and leaving a large proportion of reservoir un-swept is known as an unfavorable phenomenon during flooding trials. Generally, instability at the interface due to disturbances in porous medium promotes viscous fingering phenomenon. Connate water makes viscous fingers longer and more irregular consisting of large number of tributaries leading to the ultimate oil recovery... 

Connate water has been coexisting with oil and mineral for centuries within underground reservoirs. The oil recovery techniques, such as low salinity water injection, disturb this prolonged equilibrium state of oil/brine/rock system. However, a thorough understanding of this complex equilibrium in the reservoir is still lacking. In this study, we performed molecular dynamics simulations to provide quantitative comprehension of the thin brine film characteristics that wets carbonate reservoir rocks at molecular level. While an electric double layer is formed at the interface of calcite/low salinity water, the ions in the high saline water form several aggregates of ions. We found that these... 

Smart water injection is recognized as an effective EOR process to alter the wettability and interfacial tension to obtain higher micro/macro sweep efficiencies. This water contains reactive ions such asMg2+, Ca2+ andSO42- which can act as potential-determining ions and change the surface charge of calcite rocks. One of the major concerns in the execution of an effective water-flood process, especially in tight carbonate reservoirs, is the chemical incompatibility between the formation brine and the injecting water. In the present study, laboratory fluid compatibility tests were carried out and software simulation was done to investigate the most important challenges of the water-flooding... 

In this work, the role of dissolved oxygen in the solar and the photo-Fenton-mediated E. coli inactivation process was put under scrutiny. The effect of transient species that were produced in the presence of various natural organic matter isolates (NOM), namely Suwannee River (SR) NOM, Nordic Reservoir (NR) NOM, SR Humic acid (SRHA), and SR Fulvic acid (SRFA) was studied in detail. The role of 1 O2 in this reaction was systematically evaluated by modifying the O2 concentration (N2/O2 purging) and the matrix composition (10, 50, and 100% deuterium oxide (D2O) v/v). In the presence of NOM, 1 O2 was generated and the enhancement of E. coli inactivation rate due to charge transfer from triplet... 

This paper represents a numerical study on the effects of landslide initial submergence and its geotechnical and rheological properties on the characteristics of landslide-generated waves (LGWs) and landslide deformation. A number of 117 numerical experiments are performed using a two-layer Coulomb Mixture Flow (2LCMFlow) model on a real-sized numerical flume as a simplified cross section of the Maku dam reservoir, located in the Northwest of Iran. Three different initial locations are considered for landslide representing a subaerial (SAL), a semi-submerged (SSL), and a submarine (SML) landslide. Based on the numerical results, the majority of SMLs and in some cases SSLs generate tsunami... 

Seismic analysis of complex structures such as concrete dams has been the subject of numerous studies. One of the challenges in seismic analysis of such systems is proper modelling of massed foundation. Since concrete dams’ foundations are usually layered, this makes the homogenous half-space assumption relatively unrealistic. In this paper, the effects of massed layered foundation on seismic response of concrete gravity dams in dam-reservoir-foundation systems are investigated. Seismic finite element analysis of the system carried out using domain reduction method. This approach is compared with another available method named, free-field column. First set of analysis considers the effect of... 

One of the main concerns in using commercial software for finite element analyses of dam-foundation-reservoir systems is that the simplifying assumptions of the massless foundation are unreliable. In this study, an appropriate direct finite element method is introduced for simulating the mass, radiation damping and wave propagation effect in foundations of dam-foundation-reservoir systems using commercial software ABAQUS. The free-field boundary condition is used for modeling the semi-infinite foundation and radiation damping, which is not a built-in boundary condition in most of the available commercial software for finite element analysis of structures such as ANSYS or ABAQUS and thus... 

Seismic analysis of complex structures such as concrete dams has been the subject of numerous studies. One of the challenges in seismic analysis of such systems is proper modelling of massed foundation. Since concrete dams’ foundations are usually layered, this makes the homogenous half-space assumption relatively unrealistic. In this paper, the effects of massed layered foundation on seismic response of concrete gravity dams in dam-reservoir-foundation systems are investigated. Seismic finite element analysis of the system carried out using domain reduction method. This approach is compared with another available method named, free-field column. First set of analysis considers the effect of... 

Capillary imbibition is an important recovery mechanism in naturally fractured reservoirs when water-filled fractures surround water-wet matrix blocks. A large amount of studies of imbibition process is simply total or partial immersion of nonwetting phase saturated rock in aqueous wetting phase. However, water advance in fractures during water flooding or water encroachment from an active aquifer introduces time dependent boundary conditions where invariant exposure of rock surface to water is not representative. In this work, a laboratory simulated matrix-fracture system was used to investigate different aspects of imbibition in the presence of fracture fluid flow (namely dynamic... 

In this study, impact of initial ensembles on posterior distribution of ensemble-based assimilation methods is statistically analyzed. Along with, sampling performance as well as uncertainty quantification of these methods are compared in terms of their ability to accurately and consistently evaluate unknown reservoir model parameters and reservoir future performance. For this purpose, a synthetic test problem, which is a small but highly nonlinear reservoir model under two-phase flow, is utilized. Subsequently, different initial ensemble sets are considered and are updated through the assimilation process performed on the test problem using ensemble-based assimilation methods. Afterwards,... 

Carbonated water injection (CWI) is known as an efficient technique for both CO2 storage and enhanced oil recovery (EOR). During CWI process, CO2 moves from the water phase into the oil phase and results in oil swelling. This mechanism is considered as a reason for EOR. Viscous fingering leading to early breakthrough and leaving a large proportion of reservoir un-swept is known as an unfavorable phenomenon during flooding trials. Generally, instability at the interface due to disturbances in porous medium promotes viscous fingering phenomenon. Connate water makes viscous fingers longer and more irregular consisting of large number of tributaries leading to the ultimate oil recovery... 

This paper represents a numerical study on the effects of landslide initial submergence and its geotechnical and rheological properties on the characteristics of landslide-generated waves (LGWs) and landslide deformation. A number of 117 numerical experiments are performed using a two-layer Coulomb Mixture Flow (2LCMFlow) model on a real-sized numerical flume as a simplified cross section of the Maku dam reservoir, located in the Northwest of Iran. Three different initial locations are considered for landslide representing a subaerial (SAL), a semi-submerged (SSL), and a submarine (SML) landslide. Based on the numerical results, the majority of SMLs and in some cases SSLs generate tsunami... 

In the optimization of naturally fractured reservoirs, it is required to take into account their complex flow behavior due to high conductivity fractures. In this regard, the possible effects of fractures must be included in the optimization procedure. In a water-flooding project, fast water breakthrough from injection to production wells may be occurred because of high permeability fractures. To consider the effect of the fracture system, a multi-criterion optimization procedure is proposed in this work. For this contribution, Non-dominated Sorting Genetic Algorithm version II (NSGA-II) is implemented for the optimization purposes. Considering the effect of the fracture system on the flow... 

Turbidity currents are often the main processes of sediment transport in deep waters and reservoirs. To prevent sedimentation in critical locations, various methods, such as placing solid obstacles in the path of these flows, have been proposed. In the present study, the effect of inlet concentration on the behavior of turbidity currents in the presence of two consecutive triangular obstacles was investigated experimentally. For this purpose, a series of laboratory experiments were conducted with various inlet concentrations. In each experiment, velocity and concentration profiles were measured using an acoustic Doppler velocimeter. The velocity of the current head and local Froude number... 

Abutments of concrete arch dams are usually crossed by several joints, which may create some rock wedges. Abutment stability analysis and controlling the probable wedge movements is one of the main concerns in the design procedure of arch dams that should be investigated. For decades, the quasi-static method, due to its simple approach, has been used by most of dam designers. In this study, the dynamic method is presented and the obtained time history of sliding safety factors is compared with the quasi-static results. For this purpose, all three components of Kobe (1979) and Imperial Valley (1940) earthquakes are applied to the wedge, simultaneously, and the magnitude and direction of wedge...