Sharif Digital Repository

In the present paper, spatially variation input effects on seismic responses of arch dams have been studied. Recorded ground accelerations at the dam foundation interface of Pacoima dam during January 13, 2001 were used for the purpose of this investigation. A numerical finite element model was developed for dynamic analysis of the dam reservoir system. The modified version of NSAD-DRI finite element program was used for the analysis and the ground acceleration time histories were interpolated at all dam foundation interface nodal points. Total and pseudo static displacements as well as developed stresses due to uniform and non uniform excitations are obtained. The results reveal that... 

Iran's proved natural gas reserves are the world's second largest. Mainly, because of climate changes and different reservoirs' characterizations, studying the behavior of production fluids and their transportation is essential. One of the main problems which occurs in the gas reservoirs is related to the hydrate formation while producing from a well, either in production strings or production lines (before and after choke). Effective parameters which influence the formation of hydrates are: high pressure, low temperature and water presence; and therefore, the high possibility of having this phenomenon in Iranian reservoirs is quite obvious especially in cold climates and for gas wells.... 

The authors studied the efficiency and accuracy of neural network model for prediction of permeability as a key parameter in reservoir characterization. So, some multilayer perceptron (MLP) neural network models with different learning algorithms of Levenberg-Margnardt, back propagation, improved back propagation (IBP), and quick propagation with three layers and different node numbers (3, 4, 5, 6, 7) in the middle layer have been presented. These models have been obtained by 630 permeability data from one of offshore reservoirs located in Saudi Arabia. The accuracy of models was studied by comparing the obtained results of each model with experimental data. So, the neural network with IBP... 

This paper investigates the efficiency and performance of several of the fiooding techniques popular in secondary and enhanced oil recovery. These processes include water fiooding, immiscible and miscible gas fiooding, and several forms of water-alternating-gas (WAG) injection. The study is carried out numerically on a typical one-dimensional domain using an advanced high-resolution central scheme. Some performance indices such as oil cut drop, breakthrough time, and sweep efficiency were employed to evaluate the appropriateness of each injection strategy  

A depleted naturally fractured gas condensate reservoir with extremely tight matrix permeability in the center of Iran is used for gas storage. Due to the tightness of the matrix, simulation of this process may present a unique challenge in terms of the importance of diffusion process in flow behavior of the injected gas in matrix blocks. This article presents a multimechanistic (Darcian-type flow and Fickian-type flow) mathematical model to investigate the importance of diffusion process as a function of important rock and fluid parameters. The authors' approach consists of the following steps: (a) development of a 1-D governing equations for a single matrix block consists of a gas... 

Although alkaline-surfactant-polymer flooding is proved to be efficient for oil recovery from heavy oil reservoirs, the displacements mechanism/efficiency of this process in fractured systems needs to more discussion, especially in five-spot patterns. In this work, several ASP flooding test were performed on fractured micromodels which were initially saturated with heavy oil at constant flow rate and different fracture geometrical characteristics conditions. The ASP solutions are constituted from 5 polymers i.e. four synthetic polymers include three hydrolyzed polyacrylamide with different molecular weight as well as a non-hydrolyzed polyacrylamide and a biopolymer, 2 surfactants i.e. a... 

As many fields around the world are reaching maturity, the need to develop new tools that allows reservoir engineering to optimize reservoir performance is becoming more demanding. One of the more challenging and influential problems along these lines is the well placement optimization problem. Determining of the location of new wells is a complex problem that depends on reservoir and fluid properties, well and surface equipment specifications, and economic criteria. Various approaches have been proposed for this problem. Among those, direct optimization using the simulator as the evaluation function, although accurate, is in most cases infeasible due to the number of simulations required.... 

In this work effect of composition changes of injection gas, CH4 + CO2, on the performance of immiscible WAG injection in light oil, 41 oAPI, which has been rarely attended in the available literature is investigated. Presence of CO2 helps to reduce the MMP of CH4 significantly. Core flood experiments are conducted at reservoir conditions and fixed flow rate of 0.5cc/min on a sandstone sample with the brine concentration of 5000 ppm, and the influence of injection gas composition as well as WAG ratio on oil recovery is investigated. Different mole percents of methane in mixture, 0%, to 100% are examined, and the tests continued to ten alternate cycles with a slug size of 0.1 pore volumes and... 

In this work, a two-dimensional fourth-order Boussinesq-type numerical model is applied to estimate the impact of landslide-generated waves in dam reservoirs. This numerical model has recently been extended for simulating subaerial landslides. The extended model is validated using available three-dimensional experimental data, and a good agreement is obtained. The numerical model is then employed to investigate the impact of landslide-generated waves in two real cases, the Maku and Shafa-Roud dam reservoirs in the northwestern and the north of Iran, respectively. Generated wave heights, wave run-up, maximum wave height above dam crest, and dam overtopping volume have been estimated for each... 

Water resources limitation in arid and semi arid regions on one hand and water demand increase on the other, have made the optimum utilization of existing water resources and systems necessary. In this context, researchers are trying to increase the accuracy and lag time of prediction by using various statistic and empirical models as well as different local and long-range variables in the last decades. Karoon River is the greatest and most important river in Iran because of agricultural water demand supply and hydroelectric power production. Therefore streamflow prediction of this river has considerable economical and social benefits. In this study the relationship between Karoon stramflow... 

Flood control as an important purpose of reservoir systems faces a wide range of natural, social and political challenges, mainly due to different uncertainties. Over the time, these uncertainties call for necessary changes in the original plan of the systems. Therefore, construction of new flood control systems as well as the storage reallocation and reservoir reoperation of existing ones are essential for adapting the systems to new information, conditions and policies. Furthermore, multipurpose nature of the multi-reservoir systems requires considering conflicts among various purposes. In this paper, a multiobjective optimization model is developed for analyzing such conflicts in a... 

Flood as a natural disaster causes heavy human and economic losses and social unrests in most areas of the world. As flood control cost and flood damage compensation is a heavy burden over countries' budget, traditional flood design methods are being replaced by more reliable risk-based methods employing comprehensive risk analysis. In this respect, flood damage estimation is an important step in flood control systems design and analysis. In large river basins with complex reservoir systems and various land uses, flood damage estimation is complex, data-intensive, time demanding, and uncertain task requiring an intensive hydrologic and hydraulic analysis. In this study a simple approach is... 

In this study, the nonlinear seismic analysis of a typical three-dimensional concrete faced rockfill dam is reported. Three components of the Loma Prieta (Gilroy 1 station) earthquake acceleration time history are used as input excitation. The dam under study is considered as if it were located in a prismatic canyon with a trapezoidal cross-section. A nonlinear model for the rockfill material is used, and contact elements with Coulomb friction law are utilized at the slab-rockfill interface. Vertical joints in the face slab are also considered in the finite element model. A substructure method, in which the unbounded soil is modelled by the scaled boundary finite element method (SBFEM), is... 

The Latian dam reservoir is one of the most important drinking water sources for Tehran, Iran. Nitrate is a major water quality problem in this reservoir. The Jajrood River, the most important water source for the reservoir, discharges large amounts of nutrients to it every year including high levels of nitrate, a pollutant of particular concern. This study presents the results obtained from simulating different point source and nonpoint source impacts on the fate and transport of nitrate in the 470 km2 Jajrood watershed using the Soil and Water Assessment Tool (SWAT) model version 2000 (SWAT2000). The SWAT model was calibrated and validated over an extended time period (1997-2005) for this... 

In the present paper, effects of non-uniform excitation due to spatially variation of seismic waves under the reservoir bottom on linear and nonlinear responses of arch dams are studied. Foundation is assumed to be massed and infinite elements are utilized to model semi-infinite medium via the far-end boundary of the foundation FE model. A continuum crack propagation model based on the smeared crack approach in 3D space is introduced. Reservoir's water is assumed compressible and the coupled system is solved using the staggered method. As a case study, Amir-Kabir double curvature arch dam in Iran is selected to investigate seismic behavior of the system. Two cases are analyzed in which wave... 

Demands growth and water resources limitation, enforce water sector policy makers to integrate water supply-demand interactions in a coherent framework for efficient water allocation. Water supply-demand interaction, changes long-term trend of water demands, which in turn has a substantial influence on water allocation. Researches on water allocation modeling lack adequate projection of relationship between water supply and demand. Socio-economic factors representing water allocation stakeholders' benefits, account for the main share of water supply-demand interaction. Identification, representation and consideration of these factors in a water allocation model, is the main limitation of... 

The objective of this study is to calibrate Priestley-Taylor (PT) model for estimating open water evaporation from an arid region reservoir called Chahnimeh. Chahnimeh Reservoir which is situated in the Sistan area in the southeast of Iran is being affected by regional energy advection during May to October. Therefore, common models of open water evaporation estimation such as PT require calibration. PT method was calibrated for Chahnimeh Reservoir using a volume balance method. Results showed that PT coefficient, αPT, as a constant over the year varies between 2.47±0.09 and 1.20±0.03 for two different hydrologic conditions of dry and wet. It means that there is also an intra-annular... 

A three-dimensional multi-component transport model in a two-phase oil-water system was developed. The model includes separated terms to account for the dispersion, convection, injection, growth and death of microbes, and accumulation. For the first time, effects of both wettability alteration of reservoir rock from oil wet to water wet and reduction in interfacial tension (IFT) simultaneously on relative permeability and capillary pressure curves were included in a MEOR simulation model. Transport equations were considered for the bacteria, nutrients, and metabolite (bio-surfactant) in the matrix, reduced interfacial tension on phase trapping, surfactant and polymer adsorption, and effect... 

Density Current is formed when a fluid with heavier density than the surrounding fluid flows down an inclined bed. These types of flows are common in nature and can be produced by; salinity, temperature inhomogeneities, or suspended particles of silt and clay. Driven by the density difference between inflow and clear water in reservoirs, density current plunges clear water and moves towards a dam, while density current flows on a sloping bed. The vertical spreading due to water entrainment has an important role in determining the propagation rate in the longitudinal direction. In this work, two-dimensional steady-state salt solutions' density currents were investigated by means of... 

The development of density or turbidity currents causes serious problems for environmental hydraulics in reservoirs. The stream entered to a reservoir can carry sediments, nutrients and chemicals as density or turbidity currents. The fate of sediment and other substances transported by the current depends on the characteristics of the turbidity current itself, i.e. the velocity of fluid, the amount of mixing with reservoir water and the rates of sediment deposition and resuspension. These are important factors for water quality in reservoirs. A two-dimensional, depth-averaged, finite-volume numerical model is developed to study density currents, driven by non-cohesive sediments. The model...