Sharif Digital Repository

Hexagonal array of Cu@CuO core-shell nanoparticles (NPs) on the a-C:H thin film was prepared by codeposition of RF-sputtering and RF-PECVD. The trace of hexagonal NPs supperlattice was recognized by AFM image and XRD result. On the basis of localized surface plasmon resonance (LSPR) of core-shell NPs, the prepared array detected a low flow rate of CO gas at room temperature. XPS results indicate that the surface of Cu@CuO core-shell NPs have no chemical reaction with CO molecule. The physical absorption of CO molecule on the surface of Cu@CuO core-shell NPs increases the LSPR absorbance and causes a red shift in LSPR wavelength. These experimental results are in agreement with Mie theory... 

The low temperature perovskite-type strontium titanate (SrTiO 3) thin films and powders with nanocrystalline and mesoporous structure were prepared by a straightforward particulate sol-gel route. The prepared sol had a narrow particle size distribution with hydrodynamic diameter of about 17 nm. X-ray diffraction (XRD) revealed that the synthesized powders had a perovskite-SrTiO 3 structure with preferable orientation growth along the (1 0 0) direction. TEM images showed that the average crystallite size of the powders annealed in the range 300-800°C was around 8 nm. FE-SEM analysis and AFM images revealed that the deposited thin films had mesoporous and nanocrystalline structure with the... 

Semiconducting lead sulfide film was deposited on Stainless Steel (SS) electrode by cyclic voltammetry (CV) at room temperature. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry were used to investigate the electrochemical properties of PbS film in Na2SO4 solution. The voltammetric results showed that oxidative dissolution of PbS film occurred at about 0.21 V vs. Ag/AgCl and total film detachment from the surface occurs with increasing potential. It is concluded that the electrode surface was not passivated by sulfur produced from oxidative dissolution of PbS film. Also, cathodic reduction of the film continued to beyond the hydrogen evolution at -1.35 V vs. Ag/AgCl.... 

The binuclear cyclometalated complexes [Pt2Me 2(ppy)2(μ-dppm)], 1a, and [Pt2Me 2(bhq)2(μ-dppm)], 1b, in which ppy = 2-phenylpyridyl, bhq = benzo{h}quinoline and dppm = bis(diphenylphosphino)methane, were synthesized by the reaction of [PtMe(SMe2)(ppy)] or [PtMe(SMe 2)(bhq)] with 1/2 equiv of dppm at room temperature, respectively. Complexes 1a and 1b were fully characterized by multinuclear (1H, 31P, 13C, and 195Pt) NMR spectroscopy and were further identified by single crystal X-ray structure determination. A comparison of the intramolecular Pt-Pt and π-π interactions in complexes 1a and 1b has been made on the basis of data on crystal structures and wave functions analysis. The binuclear... 

A Bandgap circuit capable of generating a reference voltage of less than 1 V with high PSRR and low temperature sensitivity is proposed. High PSRR achieved by means of an improved current mode regulator which isolates the bandgap voltage from the variations and the noise of the power supply. A vigorous analytical approach is presented to provide a universal design guideline. The analysis unveils the sensitivity of the circuit characteristic to device parameters. The proposed circuit is fabricated in a 0.18μm CMOS technology and operates down to a supply voltage of 1.2 V. The circuit yields 20 ppm/°C of temperature coefficient in typical case and 50 ppm/°C of temperature coefficient in worst... 

Titanium dioxide is a cheap, chemically stable and non-toxic material. However its photocatalytic properties are unstable and it is a modest semiconductor and a mediocre insulator. For several applications it would be interesting to make it either more insulating or more conducting. The goal of this work was to modify the photocatalytic properties of nano-crystalline TiO2 powders by wet chemical routes and hydrothermal methods to understand the mechanism leading to these modifications The principal factors that influence the photocatalytic properties are on the one hand the concentration and nature of the chemical and physical conditions in TiO2, and on the other hand the morphology of the... 

Nowadays, gasochromic Pd/WO3 coatings as optically switchable materials have become more applicable for hydrogen sensors and smart windows. In this study, WO3 films were prepared by Pulsed Laser Deposition (PLD) and spin-coating sol-gel techniques. For deposition of Pd, first a layer of PdCl2 was obtained via a simple drop-drying process by dropping PdCl2 solution onto WO3 substrates and drying them at room temperature. Then Pd nanoparticles were synthesized via hydrogen gas exposure that causes reduction of the PdCl2 layer. According to Scanning Electron Microscope (SEM) observations before hydrogen reduction, many individual nanoparticles or fractal-like constructions of palladium were... 

Carbon nanotubes were electrodeposited in acetonitrile solution at room temperature using Cu, and Fe-Ni nanoparticles as nucleation sites on HF-etched Si(100) wafer substrate. The electrochemical behavior of the deposition was investigated by voltammetry and chronoamperometry techniques. In order to obtain the optimum growth condition, the deposition critical parameters including current density range, potential and time were studied and calculated. Carbon nanotubes with approximate external diameter of 40-100 nm were fabricated under potentiostatic condition and diffusion control at - 20 V in 4-6 h. The film crystallinity was investigated by means of X-ray diffraction and the tubes... 

By co-deposition via RF-Sputtering and RF-PECVD methods and using Cu target and acetylene gas, we prepared Cu@Cu2O coreshell nanoparticles on the a-C:H thin film at room temperature. Mie absorption of Cu cores, scattering from Cu2O shell and luminescence that rises from carrier transfer in Cu@Cu2O interface were employed to fit the whole range of visible extinction spectrum of these coreshells. From simulation it was found that scattering and luminescence have an important effect on the energy, width and shape of LSPR absorption peak. Shift of LSPR peak is more affected by the dielectric coefficient of shell than Cu core size particularly for Cu core diameter above 4 nm. Also, the LSPR... 

A polymeric manganese(II) complex with the general formula [Mn(O 2CCH2NH2CH2CO2) 2(H2O)2]n from reaction of iminodiacetatic acid and manganese(II) perchlorate under nitrogen in water, was synthesized and characterized. The structure of the complex was determined using single-crystal X-ray diffraction, elemental analysis, IR and UV-vis spectra. This complex exhibited excellent catalytic activity and selectivity for oxidation of various alcohols and sulfides to the corresponding aldehydes/ketone and sulfoxides using urea hydrogen peroxide and oxone (2KHSO 5·KHSO4·K2SO4), respectively, as oxidants under air at room temperature. The easy preparation, mild reaction conditions, high yields of the... 

Bismuth ferrite, BiFeO 3, is almost the only material that is simultaneously magnetic and a strong ferroelectric at room temperature. As a result it is the most investigated multiferroic material. In this study, bismuth ferrite thin films were deposited on silicon wafer (100) and glass by pulsed-laser deposition and their structural, optical, and electrical properties were measured. Our study indicates that Bi richness in these films can stimulate formation of oxygen vacancy in the system which in its turn leads to delocalization of carriers and a more intensified photoconductivity response. X-ray diffraction analysis revealed formation of BiFeO 3 (BFO), but it also showed formation of Bi 2O... 

A new method for production of bimetallic rods, utilizing the equal channel angular extrusion (ECAE) process has been introduced before by previous researchers, but no attempt has been made to assess the effect of different temperatures and holding times in order to achieve a diffusional bond between the mating surfaces. In present research copper sheathed aluminum rods have been ECAEed at room temperature and subsequently held at a constant ECAE pressure, at different temperatures and holding times to produce a diffusional bond between the copper sheath and the aluminum core. The bonding quality of the joints was examined by shear strength test and a sound bonding interface was achieved.... 

However, there are many works on annealing process of SPDed non-ferrous metals, there are limit works on annealing process of SPDed low carbon steel. Therefore, in this study the annealing responses after constrained groove pressing (CGP) of low carbon steel sheets have been investigated. The sheets are subjected to severe plastic deformation at room temperature by CGP method up to three passes. Nano-structured low carbon steel sheets produced by severe plastic deformation are annealed at temperature range of 100-600 °C for 20. min. The changes of their microstructures after deformation and annealing are studied by optical microscopy. The effects of large strain and annealing temperature on... 

Pseudopolyrotaxanes, Ps-PR, consisting of α-cyclodextrin rings, polyethylene glycol axes and end triazine groups were prepared and then were capped by amino-functionalized quantum dots, NH 2-QDs, to achieve polyrotaxanes. The amino-functionalized QDs stoppers of polyrotaxanes were used as core to synthesize polyamidoamine, PAMAM, dendrons divergently and hybrid nanomaterials were obtained. Synthesized hybrid nanomaterials were characterized by different spectroscopy, microscopy and thermal analysis methods. They were freely soluble in water and their aqueous solutions were stable at room temperature over several months. Due to their biocompatible backbone, high functionality and water... 

Perovskite-type barium strontium titanate (BST) thin films and powders with nanocrystalline and mesoporous structure were prepared by a straightforward particulate sol-gel route at room temperature. The prepared sol had a narrow particle size distribution of about 20 nm. X-ray diffraction (XRD) revealed that phase composition and preferable orientation growth of BST depended upon the annealing temperature. Transmission electron microscope (TEM) images showed that the crystallite size of the powders decreased with increasing annealing temperature from 8 nm at 25 °C down to 5 nm at 800 °C. Field emission scanning electron microscope (FE-SEM) analysis and atomic force microscope (AFM) images... 

To improve the strength and toughness of AISI 4340 steel, different microstructures, containing full bainite, bainite-ferrite, martensite-ferrite and full martensite were produced by different heat treatment cycles. Tensile, impact and hardness tests were carried out at room temperature. The ductile-brittle transition temperature was determined from impact data at different temperatures. The results showed that steel with bainite - 0.34 ferrite microstructure has the highest elongation and charpy impact energy, while its tensile strength and yield stress decreased in comparison to other microstructures. This increment was noticeable when bainite - 0.34 ferrite steel was tempered. The... 

Nanostructured AA6063 (NS-Al) powder with an average grain size of ~100. nm was synthesized by high-energy attrition milling of gas-atomized AA6063 powder followed by hot extrusion. The microstructural features of the consolidated specimen were studied by transmission electron microscopy (TEM) and electron backscatter diffraction (EBSD) techniques and compared with those of coarse-grained AA6063 (CG-Al) produced by hot powder extrusion of gas-atomized powder (without using mechanical milling). The consolidated NS-Al alloy consisted of elongated ultrafine grains (aspect ratio of ~2.9) and equiaxed nanostructured grains. A high fraction (~78%) of high-angle grain boundaries with average... 

Tungsten trioxide has been prepared by using P-PTA as a precursor on alumina substrates by spin coating method. Palladium introduced on WO 3 film via electrolysis deposition by using palladium chloride as catalytic precursor. The catalytic precursor was introduced on the series of films with different morphologies. X-ray diffractometry (XRD), Scanning electron microscopy (SEM) and XPS were applied to analyze structure and morphology of the fabricated thin films. Then we measured variation of samples' electrical conductivity of pure and Pd added films in air and diluted hydrogen. Addition of Pd resulted in a remarkable improvement of the hydrogen sensing properties of WO 3 by detection of... 

There are many works on annealing process of SPDed bulk metals but there are limited works on annealing process of SPDed sheets. Therefore, in this study the annealing response after constrained groove pressing (CGP) of low carbon steel sheets has been investigated. These sheets are subjected to severe plastic deformation at room temperature by CGP method up to three passes. Nano-structured low carbon steel sheets produced by severe plastic deformation are annealed at temperature range of 100 to 600 °C for 20 min. The microstructural changes after deformation and annealing are studied by optical microscopy. The effects of CGP strain and annealing temperature on microstructure, strength and... 

The ZnO nanowires have been synthesized using vapor-liquid-solid (VLS) process on Au catalyst thin film deposited on different substrates including Si(1 0 0), epi-Si(1 0 0), quartz and alumina. The influence of surface roughness of different substrates and two different environments (Ar + H2 and N2) on formation of ZnO nanostructures was investigated. According to AFM observations, the degree of surface roughness of the different substrates is an important factor to form Au islands for growing ZnO nanostructures (nanowires and nanobelts) with different diameters and lengths. Si substrate (without epi-taxy layer) was found that is the best substrate among Si (with epi-taxy layer), alumina and...