Sharif Digital Repository

The main objective of this paper is to provide comparative quantitative examinations on the capabilities of two-dimensional horizontal and pseudo-three-dimensional (3D) modelling approaches for simulating spatial and temporal variability of the flow and salinity in Lake Urmia, Iran. The water quality in the lake has been an environmentally important subject partly because this shallow hypersaline aquatic ecosystem is considered to be one of the largest natural habitats of a unique multicellular organism, Artemia urmiana. This brine shrimp is the major food source for many of the protected and rare shorebirds that visit the lake. A.urmiana can grow and survive in certain ranges of salinity,... 

Urmia Lake, located in a closed basin in north-west Iran, is the largest lake (5000-6000 km2) in the Middle East. It is very saline with total dissolved salts reaching 200 g/l compared with a normal seawater salinity of about 35 g/l. The construction of a causeway, which was initiated in 1979 but then abandoned until the early 2000s, is near completion and will provide road access between the western and eastern provinces. The causeway has an opening 1.25 km long and divides Urmia Lake into a northern and southern basin and restricts water exchange. The flow and salinity regimes are affected by the presence of this new causeway, and there are concerns over the well being of the Artemia... 

Bioactive glass has been used clinically in bone repair applications for bone grafting because of its prominent physiochemical and osteogenic properties. Various attempts have been made to enhance bioactive glass efficiency in combination with other biomaterials such as antibiotics and growth factors. In present study, we developed a modification of bioactive glass nanoparticles that insured long term antibacterial effect. Bioactive glass nanoparticles (BGNs) were functionalized with (3-Aminopropyl) triethoxysilane (APTS), then vancomycin (VAN) was immobilized onto BGNs-APTS via EDC/NHS cross-linking process. Another study group namely BGNs-VAN was synthesized as a control group without any... 

Coaxial electrospinning with the ability to use simultaneously two separate solvents provides a promising strategy for drug delivery. Nevertheless, controlled release of hydrophilic and sensitive therapeutics from slow biodegradable polymers is still challenging. To address this gap, we fabricated core-sheath fibers for dual delivery of lysozyme, as a model protein, and phenytoin sodium as a small therapeutic molecule. The sheath was processed by a gelatin solution while the core fibers were fabricated from an aqueous gelatin/PVA solution. Microstructural studies by transmission and scanning electron microscopy reveal the formation of homogeneous core-sheath nanofibers with an outer and... 

The study of salt tolerance mechanisms in halophyte plants can provide valuable information for crop breeding and plant engineering programs. The aim of the present study was to investigate whole transcriptome analysis of Aeluropus littoralis in response to salinity stress (200 and 400 mM NaCl) by de novo RNA-sequencing. To assemble the transcriptome, Trinity v2.4.0 and Bridger tools, were comparatively used with two k-mer sizes (25 and 32 bp). The de novo assembled transcriptome by Bridger (k-mer 32) was chosen as final assembly for subsequent analysis. In general, 103290 transcripts were obtained. The differential expression analysis (log2 FC > 1 and FDR < 0.01) showed that 1861... 

In this study, the effect of distance-dependent dispersion coefficients on density-driven flow is investigated. The linear asymptotic model, which assumes that dispersivities increase linearly with distance from the source of contamination and reach asymptotic values at a large asymptotic distance, is employed. An in-house numerical model is adapted to handle distance-dependent dispersion. The effect of asymptotic-dispersion on aquifer contamination is analyzed for two tests: (i) a seawater intrusion problem in a coastal aquifer and (ii) a leachate transport problem from a surface deposit site. Global Sensitivity Analysis (GSA) combined with the Polynomial Chaos Expansion (PCE) surrogate... 

The chemical, thermal, and mechanical degradation of polymer chains under high salinity, temperature, and shear rates in oil reservoirs are the current challenges of the polymer flooding process. To answer such a complex requirement, recently, acrylamide (AM)-based thermoassociating graft copolymers (TAP) were synthesized that presented excellent performance as a viscosity enhancer, especially under high temperature and salinity conditions. The purpose of this study was to further investigate the effect of salinity, shear rate, mechanical strength, and adsorption of these TAPs on viscosity-enhancing performance at different temperatures. Finally, the performance of the TAPs was studied in... 

Hereby a simple, low-cost and scalable route is being presented for preparation of binder-free electrodes of reduced graphene oxide (RGO) on Ni foam (Ni/Gr). In this regard, the Ni foams are dipped in graphene oxide (GO) slurry. Next, the GO loaded Ni foams are kept in a freeze dryer for 24 h and heated up to 800 °C in an inert atmosphere. In this approach, the amount of active materials can be easily optimized for capacitive deionization (CDI). The characterization of Ni/Gr electrodes revealed a 3D porous assembly of RGO on Ni substrate which is helpful for the fast ion diffusion and rapid electron transport. The electrochemical performance of the prepared electrodes is investigated in both... 

Despite many attempts to study the interaction of fluids in low-salinity flooding, they do not examine the principles of interphasic transition phenomena. This study aims to provide a new understanding of liquid–liquid interactions during the low-salinity water interaction through a series of experiments on the oil, emulsion, and aqueous phase. Three samples of crude oils with different asphaltene concentrations and structures with known physical properties are in contact with different solutions. The brine pH, conductivity, and crude oil viscosity experiments before and after contacting the oil with brine showed that the heteroatom concentration and compaction of crude oil asphaltene... 

Soil salinity threatens agricultural production worldwide by constraining plant growth and final crop yield. The early stages are most sensitive to salinity, in response to which salicylic acid (SA) has demonstrated beneficial effects in various plant species. Based on this, a maize (Zea mays L.) pot experiment was set up combining three levels of soil salinity (0, 6 and 12 dS m–1), obtained through NaCl addition, with three levels of SA (0, 300 and 600 mM), applied by leaf spraying 20 days after seedling emergence. Fifteen days later, the following traits were assessed: morphology (plant height, leaf number), growth (root and shoot dry weight), leaf water status [relative water content... 

In this study a membrane bioreactor (MBR) has been studied experimentally for the treatment of oil field wastewater (produced water). This type of wastewater is characterised with relativity moderate to high amount of salt and oil. The normal bacteria which are growing in conventional activated sludge and MBR cannot withstand at these adverse conditions, therefore it is necessary to be adapted. In this study, different samples from sea sediment in Bushehr (south of Iran) were analysed and different groups of bacteria were isolated and adapted for surveying under high salinity conditions. The performance and efficiency of these bacteria in the degradation of model oil has been studied. The... 

Remote sensing is an effective tool for capturing spatial and temporal variations of water surface temperature (WST) in large lakes. The WST of Urmia Lake in northwestern Iran was examined from 2007 to 2010, using MODIS land surface temperature (LST) products. Spatial and temporal (diurnal, monthly, seasonal and inter-annual) variations of Urmia Lake WST were also investigated. Results indicate that the MODIS-derived WSTs are in a good agreement with the in situ data (R2=0.92 and bias=-0.27). Spatial analysis of WST revealed that there are three thermal zones along the lake: the shallow region in barriers of the causeway, islands and the shoreline; the south part; and the deep north parts.... 

Urmia Lake in the northwest of Iran is the second largest hyper-saline lake worldwide. During the past two decades, a significant water level decline has occurred in the lake. The existing estimations for the lake water balance are widely variable because the lake bathymetry is unknown. The main focus of this study is to extract the volume-area-elevation (V-A-L) characteristics of Urmia Lake utilizing remote sensing data and analytical models. V-A-L equations of the lake were determined using radar altimetry data and their concurrent satellite-derived surface data. Next, two approximate models, a power model (PM) and a truncated pyramid model (TPM), were parameterized for Urmia Lake and... 

The Shadegan Wetland is a Ramsar-listed wetland in the south-west of Iran at the head of the Persian Gulf. It is the largest wetland of Iran covering about 400,000 hectares. The wetland plays a significant hydrological and ecological role in the natural functioning of the northern Gulf. It also supports a very diverse flora and fauna and is the most important site in the world for Marbled Teal. The water regime is threatened by upstream abstraction of water for irrigation and the saline discharge from sugar cane industries and irrigation schemes. This will result in an overall reduction in wetland water quantity and quality, leading to a change in plant community composition. This paper... 

Low Salinity Waterflooding (LSWF) has become a popular tertiary injection EOR method recently. Both fluid-fluid and fluid-rock interactions are suggested as the contributing mechanisms on the effectiveness of LSWF. Considering the contradictory remarks in the literature, the dominating mechanisms and necessary conditions for Low Salinity Effect (LSE) varies for different crude oil-brine-rock (CBR) systems. The aim of the present study is to investigate LSE for an oil field in the Middle East that is composed of separate sandstone and limestone layers. Contact angles and Interfacial Tension (IFT) are measured to have more insight on the CBR under investigation. Visual experiments were... 

Low Salinity Waterflooding (LSWF) has become a popular tertiary injection EOR method recently. Both fluid-fluid and fluid-rock interactions are suggested as the contributing mechanisms on the effectiveness of LSWF. Considering the contradictory remarks in the literature, the dominating mechanisms and necessary conditions for Low Salinity Effect (LSE) varies for different crude oil-brine-rock (CBR) systems. The aim of the present study is to investigate LSE for an oil field in the Middle East that is composed of separate sandstone and limestone layers. Contact angles and Interfacial Tension (IFT) are measured to have more insight on the CBR under investigation. Visual experiments were... 

Due to the increasing need for drinking water in the world, various membrane processes have been developing significantly over the past several years. The process of membrane distillation is one of the non-isothermal processes that cause steam to pass from the membrane due to the difference in temperature and the resulting difference in vapor pressure. Due to the lack of precision in the amount of flux and thermal efficiency in various operating conditions the membrane distillation process still needs development. This article attempted to examine the effects of flowrate, temperature, and module length on the performance of the membrane distillation process using computational fluid dynamics... 

Photothermally heated and mesh-gridded membrane distillation (PHMD) system is proposed for desalination of high saline aqueous solutions. A triple-layered membrane, composed of a photothermal top nanofibrous layer containing polyacrylonitrile and dispersed carbon black nanoparticles and a polyvinylidene fluoride porous membrane supported on a nonwoven polyester, was prepared. A polypropylene mesh was used to hold the membrane. A 3D numerical simulation of the PHMD system was carried out by COMSOL and the appropriate length of the membrane module was determined. The effects of various operating parameters including solar radiation intensity on the permeate flux and thermal efficiency were...