Sharif Digital Repository

A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition  

Alcohols are oxidised rapidly to the corresponding carbonyl compounds by montmorillonite KSF or silica supported barium manganate, under solvent-free conditions and microwave irradiation  

Immobilization of enzymes on nonporous supports provides a suitable model for investigating the effect of external mass transfer limitation on the reaction rate in the absence of internal diffusional resistance. In this study, deacylation of penicillin G was investigated using penicillin acylase immobilized on ultrafine silica particles. Kinetic studies were performed within the low-substrate-concentration region, where the external mass transfer limitation becomes significant. To predict the apparent kinetic parameters and the overall effectiveness factor, knowledge of the external mass transfer coefficient, kLa, is necessary. Although various correlations exist for estimation of kLa, in... 

A new, simple and sensitive method for the simultaneous determination of mercury(II) and methylmercury chloride at sub-ng 1-1 levels in river waters is described. Inorganic and organic mercury were preconcentrated from fresh water samples simultaneously on a laboratory-made column containing 2-mercaptobenzimidazol loaded on silica gel and then quantitatively eluted with 0.05 M KCN solution and 2.0 M HCl to desorp inorganic and methylmercury species, respectively. After irradiation with an intensive UV source, MeHg+ was decomposed and mercury vapours were generated from inorganic and organic mercury using an acidic SnCl2 solution in a continuous flow system and were subsequently determined... 

2-Mercaptobenzimidazole, loaded on silica gel (MBI-SG) was used for preconcentration and speciation of iron(II) and iron(III) in water samples. The speciation is based upon selective retention of iron(III) on MBI-SG sorbent and quantitatively passing iron(II) ions. This type of sorbent was not only capable of separating theses two ions but also could concentrate them. The adsorbed iron(III) on MBI-SG was desorbed from the column by an SCN- solution and transferred to the detection device. The effluent, then, was treated with hydrogen peroxide to oxidize iron(II) into iron(III) and subsequently was pumped through the MBI-SG column. A home-made flow injection system was coupled with a UV-VIS... 

Oxidative deprotection of silylethers, acetals and ketals, to their corresponding alcohols, aldehydes and ketones have been achieved using oxygen or air in the presence of cobalt and manganese salts of 4-aminobenzoic acid supported an silica gel as catalysts. Reactions are clean and catalysts can be recovered easily and reused repeatedly  

Understanding the chemistry of sandstone acidizing is important in designing an effective treatment for subsurface rock formations. The complex chemistry of sandstone systems leads to the precipitation of minerals that contribute to formation damage. Thus, monitoring the concentration and location of precipitates is necessary. In this work, a continuum-scale sequential implicit LEA/PLEA reactive transport model is developed and programmed through coupling OpenFOAM and Reaktoro to improve the model prediction. The proposed LEA/PLEA models are compared for core acidizing simulations at relatively high and low Damköhler numbers. We found that the common assumption of kinetically-controlled flow... 

Aims: Synthesis of nanocarrier Fe3O4/silica-starch/PNVCL for drug delivery and Fe3O4/GO-starch for antibiotic removal applications Background: In the first part, the new magnetic nanocomposite including Fe3O4 nanoparticles coated with silica, anchored starch nanoparticles, and poly(N-vinylcaprolactam) and then, loaded by acetazolamide. In the second part, magnetic starch nanocomposites were synthesized and modified with graphene oxide. Methods: The drug loading, release and intrinsic cytotoxicity were measured. Also, the potential of Fe3O4/GO-starch as an adsorbent to remove cephalexin antibiotics from aqueous solutions was evaluated. Result: In the first part, the maximum drug adsorption... 

In drilling industry, energy consumption counts from 20 to 40 percent of total costs. Enhanced water-based mud (WBM) drilling fluids with nanoparticles can save energy in drilling processes. An in-house Taylor-Couette flow system (TCS) was developed at Australian University (AU) to study WBM enhanced by Al2O3, SiO2, and TiO2 nanoparticles. The TCS is really a practical tool to help well drillers with a rough idea of viscosity when nanoparticles are added. The TCS for sure cannot substitute advanced rheometry. The goal of the present experiment is to produce a rough estimate in field operation. Experimental results were examined with several rheology models in our previous publications. In... 

This manuscript describes the implementation of plasma-enhanced chemical vapor deposition (DC-PECVD) and vapor-liquid-solid (VLS) techniques to fabricate a yolk-shell SnO2@Void@C nanowire (NW) structure. SnO2 nanowires have been synthesized on the stainless steel mesh substrate through the VLS method. The PECVD-assisted growth of carbon nanolayer on the SnO2 and SiO2 coated SnO2 NWs has been performed to fabricate SnO2@C core-shell and SnO2@SiO2@C yolk-shell structures, respectively. A consequent silica etching process converted the SnO2@SiO2@C into SnO2@Void@C structure. The electrochemical performance of bare SnO2 NWs, SnO2 NWs @ C, and SnO2 @Void @ C coaxial NWs structures have been... 

Nowadays, the world is facing a shortage of fresh water. Utilizing adsorbent materials to adsorb air moisture is a suitable method for producing freshwater, especially combining the adsorption desalination system with solar energy devices such as solar collectors. The low temperature of solar collectors has caused some water to remain in the adsorbents in the desorption process and has reduced the possibility of using these systems. In this research, for the first time, an evacuated tube collector (ETC) is used as an adsorbent bed so that the temperature of the desorption process reaches higher values and as a result, more fresh water is expected to produced. In this study, two adsorption... 

In recent years, pozzolana are being increasingly used in different types of concretes and mortars. This investigation aims to evaluate the effect of replacing 7, 14, 21, and 28% cement (by weight) with silica fume (SF), granulated blast furnace slag (GBFS), zeolite, and fly ash (FA) under elevated temperatures. Forty mix designs were built with various water-to-cement ratios and plasticizers. Three hundred and six specimens were prepared, and the flexural, uniaxial compression and tensile tests were performed on specimens after exposure to elevated temperatures between 25°C and 900°C. The X-ray diffraction (XRD) test was then performed on the two series of specimens. Accordingly, the... 

Understanding the adsorption dynamics of nanoparticles at solid-liquid interfaces is of paramount importance to engineer nanoparticles for a variety of applications. The nanoparticle surface chemistry is significant for controlling the adsorption dynamics. This study aimed to experimentally examine the adsorption of surface-modified round-shaped silica nanoparticles (with an average diameter of 12 nm), grafted with hydrophobic (propyl chains) and/or hydrophilic (polyethylene glycol chains) agents, at an aqueous solution-silica interface with spherical soda-lime glass beads (diameter of 3 mm) being used as adsorbents. While no measurable adsorption was observed for solely hydrophobic or... 

The carbon dioxide (CO2) separation can be enhanced by using modified materials like a deep eutectic solvent (DES) modified mesoporous silica SBA-15 in polymeric support i.e polysulfone via mixed matrix membranes (MMMs). The pure SBA-15 and DES are potential candidates for the CO2 capturing and their combination has not been reported yet. In this work, a fresh DES was synthesized by combining equal concentrations of Decanoic acid and choline chloride by mass. MMMs were fabricated by DES functionalized SBA-15 (DES-SBA) filler. The DES-SBA-based polymeric MMMs of different compositions, from 5% to 20% with the difference of five each, were developed and subjected to the gas permeation analysis... 

The simultaneous control of the molecular weight, separation, and purification of polyvinyl acetate was achieved using a cobalt-mediated radical polymerization (CMRP) in a packed column with silica gel particles (PC-CMRP). The controlled radical polymerization of VAc in the packed columns was evaluated from the linear time dependence of Ln[M]0/[M], linear increase of molecular weight with the increase in conversion, and narrow molecular weight distribution. PC-CMRP method was used to produce high-purity polymers with controlled molecular weight and narrow molecular weight distribution without requiring additional purification steps. The high ability of silica gel particles to adsorb free... 

Hybrid nanoparticle comprising of nanosilica (NS) and nanodiamond (ND), denoted by ND@NS, was synthesized by a two-step chemistry route and then incorporated into styrene-butadiene rubber (SBR) at low concentrations up to 5 phr by a two-roll mill. Physical hybrids of NS and ND, i.e., ND&NS, with a weight ratio similar to chemical hybrid (80:20 for NS:ND), were also incorporated into SBR. Field emission scanning electron microscopy observations revealed very fine dispersion of nanoparticles in the case of physical hybrids (ND&NS). In contrast, agglomerations and aggregation of nanoparticles were evidenced for ND@NS. Tensile and dynamic mechanical analyses exhibited a higher reinforcing effect... 

In this contribution, NiO-MgO-SiO2 catalyst was prepared and calcined at different temperatures of 500, 600, 700 and 800 °C. The resulting samples were characterized by BET-BJH, XRD, TPX, CO-chemisorption, EDS and SEM analyses. These were employed toward syngas production via propane dry reforming. The increment in the calcination temperature from 500 to 800 °C decreased the basicity of the catalysts. In addition, the active surface area and Ni dispersion were gradually declined by increasing the calcination temperature from 600 to 700 °C due to active metal sintering during the activation process. The calcined sample at 600 °C displayed the highest propane and CO2 conversions of 93% and 78%... 

Present work illustrated that the performance of ultrafine silica (Si) particles was improved considerably by rational hybridization with nanodiamond (ND). For this, Si@ND hybrid particles synthesized by chemical hybridization were incorporated into styrene-butadiene rubber (SBR) up to 10 phr. Scanning electron microscopy revealed coarse flower-like clusters for Si@ND nanohybrids, while Si exhibited rigid agglomerates in SBR. Comparing with physical hybrid (Si&ND) and single Si particles, it was revealed that chemical hybrids synergistically improved tensile properties, like 100% and 135% improvements in tensile strength and elongation at break, respectively. Dynamic mechanical analysis of... 

Silica composite membranes and BaCe0.9Y0.1O3-δ (BCY) perovskite membranes were successfully synthesized to separate hydrogen in an equimolar mixture of H2, CH4, CO, and CO2 at temperature range of 500–900 °C and pressure difference of 1 bar. The phase structure of both membranes was characterized by X-ray diffraction (XRD). Thermogravimetric analysis (TGA) was used to evaluate phase stability of perovskite membrane. FESEM images confirmed graded structure of silica membrane and uniform, dense structure of perovskite membrane. H2 permeation in semi-dense silica layer deposited on alumina substrate indicated that permeation in top selective layer follows a diffusion mechanism which is based on... 

In this contribution, the effect of physical immobilization of methylene blue (MB) into silica nanocomposites was investigated on the conversion and selectivity of the photooxygenation of anthracene and dihydroartemisinic acid (DHAA). Physically immobilized photocatalysts were synthesized through a developed Stöber method and were thoroughly characterized by UV–Vis, FTIR, XRD, XPS, SEM, TEM, HR-TEM, BET-BJH, and EDX analyses. Based on the TEM and UV–Vis results, it was determined that enhancement of the MB concentration as an organocatalyst for the Stöber reaction led to an increase in the size of the nanoparticles from 54 to 183 nm and a 21 nm blue shift in their UV–Vis spectra. Moreover,...