Sharif Digital Repository

Crashworthiness, energy absorption capacity, and safety are important factors in the design of lightweight vehicles made of fiber-reinforced polymer composite (FRP) components. The relatively recent emergence of the nanotechnology industry has presented a novel means to augment the mechanical properties of various materials. As a result, recent attempts have contemplated the use of nanoparticles to further improve the resiliency of resins, especially when resins are used for mating FRP components. Therefore, a comprehensive understanding of the response of nanoreinforced polymer composites, subjected to various rates of loading, is of paramount importance for developing reliable structures.... 

In this paper, an atomistic-based higher-order continuum model is developed in the framework of nonlinear finite element method to present the geometrically nonlinear behavior of nano-structures. In order to model the inhomogeneous deformation within the Cauchy-Born hypothesis, the higher-order CB hypothesis is presented based on a hierarchical multi-scale technique, in which the constitutive model of higher-order continuum is obtained using the derivatives of strain energy density. In order to avoid the use of C1–continuity element, as an alternative procedure, the mixed-type element is utilized employing the nodal deformation gradient as additional degrees of freedom. The relation between... 

In this paper, a micromechanical study on rate-dependent behavior of connective tissues is performed. To this end, a hyper viscoelastic constitutive model consisting a hyperelastic part for modeling equilibrium response of tissues and a viscous part using a hereditary integral is proposed to capture the time-dependent behavior of the tissues. With regard to the hierarchical structure of the tissue, strain energy function are developed for modeling elastic response of the tissue constituents i.e. collagen fibers and ground matrix. The rate-dependency is incorporated into the model using a viscous element with rate-dependent relaxation time. The proposed constitutive model is implemented into... 

Carbon nanoscroll (CNS) is a graphene sheet rolled into a spiral structure with great potential for different applications in nanotechnology. In this paper, an equivalent open shell model is presented to study the vibration behavior of a CNS with arbitrary boundary conditions. The equivalent parameters used for modeling the carbon nanotubes are implemented to simulate the CNS. The interactions between the layers of CNS due to van der Waals forces are included in the model. The uniformly distributed translational and torsional springs along the boundaries are considered to achieve a unified solution for different boundary conditions. To study the vibration characteristics of CNS, total energy... 

Self-healing materials, as a class of intelligent materials, are capable to recover a part of the weakened mechanical properties induced by damage. In this article, based on the thermodynamics of irreversible processes, employing the effective configuration in the continuum damage-healing mechanics, a viscoelastic–viscoplastic constitutive model is presented. In the constitutive model development, we adopt an additive decomposition of the total strain into elastic, viscoelastic, and viscoplastic parts. In this regard, defining the damage and healing variables and employing the strain energy equivalence hypothesis, stress and strain tensors in the effective configuration are obtained.... 

The aim of this study was to investigate the applicability of acoustic emission (AE) technique to evaluate delamination crack in glass/epoxy composite laminates under quasi-static and fatigue loading. To this aim, double cantilever beam specimens were subjected to mode I quasi-static and fatigue loading conditions and the generated AE signals were recorded during the tests. By analyzing the mechanical and AE results, an analytical correlation between the AE energy with the released strain energy and the crack growth was established. It was found that there is a 3rd degree polynomial correlation between the crack growth and the cumulative AE energy. Using this correlation the delamination... 

The macroscopic constitutive law for a heterogeneous solid containing two dissimilar nonlinear elastic phases undergoing finite deformation is obtained. Attention is restricted to the case of spherical symmetry such that only the materials consisting of an irregular suspension of perfectly spherical particles experiencing all-round uniform loading are considered which leads to a one-dimensional modeling. For the homogenization procedure, a strain-energy based scheme which utilizes Hashin's composite sphere is employed to obtain the macroscopic stress-deformation relation added by the initial volume fraction of the particles. As applications of the procedure, the closed-form macroscopic... 

Inserting the distal locking screws is a challenging step of the intramedullary nailing procedures due to the nail deformation that makes the proximally mounted targeting systems ineffective. A pre-planning methodology is proposed, based on an analytical model of the nail–bone construct, to predict the nail deformation during surgery using orthogonal preoperative radiographs. Each of the femoral shaft and the nail was modeled as a curved tubular Euler–Bernoulli beam. The unknown positions and forces of the nail–bone interaction were found using a systematic trial and error approach, which minimized the total strain energy of the system while satisfying the force and geometrical constraints.... 

In directional drilling, the most important thing that leads to pulling out the drill string is end of mud motor working life. Considering the working conditions of down hole mud motors; increasing the mechanical properties of their stator’s elastomer is crucial. Some attempts were done to increase the motor performance through geometrical changes but lack of material improvement is significant in previous studies. In this study, NBR/nanoclay composite samples were prepared through melt intercalation in an internal mixer and tested with regard to the temperature and drilling mud of down hole. Hardness, tear, fatigue and tensile test results of neat NBR elastomer and nanocomposite of NBR and... 

The current study aims to assess the influence of EPS beads inclusion on the strength properties of stabilized poorly-graded sands. Various contents of zeolite and cement as stabilizing agents, with the total amounts of 4, 8, and 12% by dry soil weight, and also 0, 0.25, and 0.5% weight ratios of EPS beads (η) are examined. Zeolite is opted among a variety of pozzolanic materials so as to replace a part of cement (0, 10, 30, 50, 70, and 90%) due to its superior environmentally friendly properties. The stress–strain behavior, unconfined compressive strength (UCS), peak strain energy (Eu), and California bearing capacity (CBR) of the zeolite and cement-treated sand-EPS beads mixtures are... 

In this article, the self-compacting lightweight concretes (SCLC) with different fibers were prepared and exposed to elevated temperatures, and their mechanical properties were investigated. Three types of fibers were steel fibers (SF), polypropylene fibers (PPF), and metal springs with a volume fraction of 0.4%. One hundred and fifty cylindrical specimens were prepared, and the compression, tensile and flexural tests were carried out on them after exposure to high temperatures ranging from 25 to 700°C. The findings indicate that incorporation of steel fibers and springs enhanced the compressive strength of concrete by 20% compared to the control specimen. Meanwhile, the polypropylene fibers... 

Chemical processing of two-dimensional (2D) transition metal dichalcogenides has attracted immense attention due to their unique optical, electrical, and catalytic properties. In this paper, we show that under special conditions during seedless chemical vapor deposition (CVD), it is possible to grow large-area 2D WS2 layers with disc-shaped morphology, which has been scarcely reported. Detailed characterizations of the CVD-grown layers by Raman spectroscopy, atomic force microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy have revealed that a gradient in the precursor concentration in the gas phase and strain energy in the deposited hexagonal clusters favor... 

Welding of severely plastic deformed aluminum sheets, with high stored strain energy, faces a serious concern, which is decrease in strength of weld and heat-affected zone (HAZ) due to instability in microstructure and related grain growth. In this work, two-passes constrained groove pressed (CGPed) Al-1050 sheets were welded via friction stir welding (FSW), without and with addition of a hybrid powder including 50 vol.% α-Al2O3 nanoparticles+50 vol.% graphite micrometric powders (∼1 vol.% of hybrid powders in stir zone). Al2O3 nanoparticles may result in grain refinement in stir zone by grain boundary pinning. Lubricating nature of graphite may reduce welding heat input resulting in lower... 

In this study, frequency simulation and critical angular velocity of a size-dependent laminated rotary microsystem using modified couple stress theory (MCST) as the higher-order elasticity model is undertaken. The centrifugal and Coriolis impacts due to the spinning are taken into account. The size-dependent thick annular microsystem's computational formulation, non-classical governing equations, and corresponding boundary conditions are obtained by using the higher-order stress tensors and symmetric rotation gradient to the strain energy. By using a single material length scale factor, the most recent non-classical approach captures the size-dependency in the annular laminated microsystem.... 

Single lap-shear (SLS) specimens of 63Sn37Pb solder joints were prepared with three different adherend thicknesses at three varying joint lengths. The fracture force was measured at a shear strain rate of 0.01 s-1 for different geometries. The elastic-plastic fracture mechanics (EPFM) theory was used to find the energy dissipated in each case using a finite element model (FEM), and the fracture energy was obtained by cohesive zone modeling (CZM). Both 2-D and 3-D models were used to explain the variations in fracture energy by the level of constraint on the joint. Also, the plastic zone area and stress distribution along the solder layer were calculated at the moment of fracture. A phase... 

In this article, the self-compacting lightweight concretes (SCLC) with different fibers were prepared and exposed to elevated temperatures, and their mechanical properties were investigated. Three types of fibers were steel fibers (SF), polypropylene fibers (PPF), and metal springs with a volume fraction of 0.4%. One hundred and fifty cylindrical specimens were prepared, and the compression, tensile and flexural tests were carried out on them after exposure to high temperatures ranging from 25 to 700°C. The findings indicate that incorporation of steel fibers and springs enhanced the compressive strength of concrete by 20% compared to the control specimen. Meanwhile, the polypropylene fibers... 

In this paper, tensile strain energy absorption of two different hybrid modified epoxies has been systematically investigated. In one system, epoxy has been modified by amine-terminated butadiene acrylonitrile (ATBN) and hollow glass spheres as fine and coarse modifiers, respectively. The other hybrid epoxy has been modified by the combination of ATBN and recycled Tire particles. The results of fracture toughness measurement of blends revealed synergistic toughening for both hybrid systems in some formulations. However, no evidence of synergism is observed in tensile test of hybrid samples. Scanning electron microscope (SEM), transmission optical microscope (TOM) and finite element (FEM)... 

Dual phase steels (DPS)s have a microstructure consisting of a hard second phase called Martensite in the soft Ferrite matrix. In recent years, there has been interest in dual-phase steels, because the application of these materials has made significant usage; particularly in the automotive sector Composite microstructure of (DPS)s exhibit interesting characteristic mechanical properties such as continuous yielding, low yield stress to tensile strength ratios(YS/UTS), and relatively high formability; which offer advantages compared with conventional high strength low alloy steels(HSLAS). The research dealt with the characterization of damage in (DPS)s. In this study by review the mechanisms... 

Various experimental and theoretical investigations have been carried out to determine the elastic properties of nanotubes in the axial direction. Their behavior in transverse directions, however, has not been well studied. In this paper, a combination of molecular dynamics (MD) and continuum-based elasticity model is used to predict the transverse-isotropic elastic properties of single-walled carbon nanotubes (SWCNTs). From this modeling study, five independent elastic constants of an SWCNT in transverse directions are obtained by analyzing its deformations under four different loading conditions, namely, axial tension, torsion, uniform and non-uniform radial pressure. To find the elastic... 

This study aims to develop the Consistent Fish-Bone (CFB) simplified model for efficient estimation of Engineering Demand Parameters (EDPs) in irregular steel Moment Resisting Frames (steel-MRFs). To achieve this goal, some modifications based on the energy consistent approach have been applied to the Improved Fish-Bone (IFB) simplified model previously presented for reinforced concrete MRFs. These modifications include: 1) adding truss elements to the IFB model to consider the effect of flexural deformations and determining their areas by balancing the overturning moment and the strain energy due to the axial deformation of columns in the original steel-MRF with the overturning moment and...