Sharif Digital Repository

CaO-P2O5-SiO2-Li2O-Fe2O3 magnetic bioactive glasses were prepared through an optimized sol-gel method. This study was emphasized on the effects of magnetic content addition on the bioactive glass properties. As the need arises, we study synthesized magnetic bioactive glass physical, rheological, and biocompatible properties. The morphology and composition of these glasses were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The particle size was also determined using a laser particle size analyzer (LPSA). The thermal measurements were put through using Differential thermal analysis (DTA). In order to evaluate the... 

YBaCu2O5 compound as one of the possible microstructures of Y3Ba5Cu8O19 has been synthesized. The X-ray diffraction analysis of this compound indicates that its formation is accompanied with the formation of YBa2Cu3O7-δ. The observed superconductivity around ∼92 K supports this. So, it seems that YBa2Cu3O7-δ is responsible for the observed superconductivity in YBaCu2O5, and this phase is not an independent superconducting phase. Consequently, the overall effect of the YBaCu2O5 formation during the Y3Ba5Cu8O19 fabrication process could be a reduction in Tc. © 2018 Elsevier B.V  

Supportless Ni-Pd-0.1CNT foamy nanocatalyst with specific surface area of 611.3 m2/g was produced by electroless deposition of nickel, palladium and multiwall carbon nanotube (MWCNT) on interim polyurethane substrate. Application of temperature programmed reduction (TPR) and temperature programmed oxidation (TPO) data into Kissinger (Redhead) kinetic model showed lessening of their activation energies due to Pd and CNT addition. Presence of foamy Ni/SiC caused 8% higher steam reforming of methane; while Ni-Pd-0.1CNT presence resulted in 22% higher methane conversion. The catalytic behavior of the samples was described by morphological and compositional studies which were carried out by... 

The main challenge in many applications of acetic acid is acid dehydration and its recovery from wastewater streams. Therefore, the performance of polyamide thin film composite is evaluated to separate acetic acid from water. To reach this goal, the formation of polyamide layer on polysulfone support membrane was investigated via interfacial polymerization (IP) of meta-phenylenediamine (MPD) in water with trimesoyl chloride (TMC) in hexane. Also, the effect of synthesis conditions, such as concentration of monomers and curing temperature on separation of acetic acid from water were investigated by reverse osmosis process. Moreover, the separation mechanism was discussed. The solute... 

Magnesium nanopowder has attracted many interests in the recent years, which has a very difficult and costly synthesis process because of its high activity. In this work, magnesium nanoparticles stabilized with amorphous carbon (Mg–C nanoparticles) were synthesized by submerged arc discharge technique in kerosene. The arc discharge was generated between two electrodes of magnesium at the arc current of 1 A and arc voltage of 50 V. Mg–C nanoparticles were characterized by various techniques. Dynamic light scattering result indicated that size of magnesium nanoparticles is about 35 nm. X-ray diffraction showed that the produced sample consisted of hexagonal magnesium and amorphous carbon and... 

Sol-gel technique was used to coat multiwall carbon nanotubes (MWCNTs) with anatase titania to increasing the surface area and improve the photocatalytic activity of TiO2. Room temperature ballistic conduct of MWCNT combined with semiconducting behavior of anatase brought about a photocatalytic improvement of ∼37 % with respect to the highest methyl orange decolorization flair. For characterization and photocatalytic efficiency determination, X-ray diffraction (XRD), field emission (FE) scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS) and ultraviolet visible (UV-vis) spectroscopy were rehearsed. Attachment of anatase... 

Three new chromophores based on the triphenylamine (MM, DM, DN) with various novel electron withdrawing anchoring groups have been synthesized for use in dye-sensitized solar cells (DSSCs). The sensitizers were characterized by 1H and 13C NMR, Mass, UV–Vis, and electrochemical analysis. The HOMO and LUMO electron distributions of the sensitizers were calculated using density functional theory on a B3LYP level for geometry optimization. The DSSC device based on DM dye showed the best photovoltaic performance among MM and DN dyes: maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 98 %, short circuit current (JSC) of 4.58 mA/cm2, open circuit voltage (VOC) of... 

Synthesis and characterization of Nafion/TiO2 membranes (TiO2 1 wt%) with different solvents (DMF, DMAc, NMP) for proton exchange membrane operating at Microbial Fuel Cell (MFC) was investigated in this study. Nanocomposite membranes are studied due to their better physical properties and higher production voltage in comparison with Nafion 112 in MFC systems. Nafion/TiO2 nanocomposite membranes were prepared by solution casting Method. The structures of membranes were investigated by Scanning Electron Microscopy (SEM). In addition, water uptake, proton conductivity, and ion exchange capacity (IEC) of membranes were measured and compared with Nafion 112 in microbial fuel cell. The... 

The reaction of 15-18 membered benzodiazacrown ethers with salicylaldehyde afforded n-membered O2N2-donor macrocyclic ligands mounted with 1,3-diazacyclohexane subrings (1-4) in high yields. The products were characterized by FT-IR, 1H, 13C NMR spectroscopy, elemental analyses, and single crystal X-ray studies. The solid state structures revealed strong intramolecular hydrogen bonding between the pendant phenolic group and the tertiary nitrogen of the corresponding macroring  

Abstract: Polyoxometalate-functionalized magnetic nanoparticles (Fe3O4@SiO2–MnPOW) were successfully synthesized via covalent anchoring of Mn(II)-substituted phosphotungstate on ammonium-modified Fe3O4@SiO2 nanoparticles. The complete characterization of nanoparticles has been carried out by scanning electron microscope, energy-dispersive X-ray, X-ray diffraction, Fourier transform infrared and elemental analysis. The resulting nanocomposites were efficient catalysts for the selective oxidation of sulfides with different green oxidants in good to excellent yields and also high selectivity. Leaching and recycling tests showed that the nanocatalyst can be reused several times without... 

Magnesium nanopowder has attracted many interests in the recent years, which has a very difficult and costly synthesis process because of its high activity. In this work, magnesium nanoparticles stabilized with amorphous carbon (Mg–C nanoparticles) were synthesized by submerged arc discharge technique in kerosene. The arc discharge was generated between two electrodes of magnesium at the arc current of 1 A and arc voltage of 50 V. Mg–C nanoparticles were characterized by various techniques. Dynamic light scattering result indicated that size of magnesium nanoparticles is about 35 nm. X-ray diffraction showed that the produced sample consisted of hexagonal magnesium and amorphous carbon and... 

In this study, a semi-conductive nanocomposite for electrically controlled drug delivery is introduced. Hydrolyzed collagen known as a naturally abundant polypeptide was modified with polycaprolactone. This modification changed the mechanical properties of the hydrolyzed-collagen. A hydrogel compound was synthesized through radical co-polymerization of acrylic acid on the backbone of this biocompatible polymer in the presence of a crosslinker. The reaction parameters affecting the water absorbency of the hydrogel were optimized using Taguchi method. In situ polymerization of aniline, incorporated conductive nanofiber pathways throughout the hydrogel matrix. 1H NMR, TGA, AFM, SEM, FTIR,... 

Lead sulfide quantum dots (PbS QDs) were decorated onto a graphene surface in a semi-core-shell structure using supercritical ethanol. The temperature of ethanol played significant role in controlling size and agglomeration of QDs as well as the extent of reduction of graphene. Average size of the QDs was estimated by transmission electron microscopy to be around 3.96 nm and by quantum models to be about 4.34 nm. PbS QDs prepared at 330 °C were of high purity, and the yield was 99%. Instrumental and chemical analyses demonstrated formation of a strong bond between PbS QDs and graphene, through a Pb-O-C bridge. UV and photoluminescence measurements along with theoretical considerations... 

Magnetite nanoparticles with a size distribution of 15-21 nm were synthesized and decorated onto surface of graphene oxide by ultrasound assisted precipitation. Size and size distribution of the obtained M-GO hybrid were appreciably finer than the hybrids prepared by stirring method. M-GO is a superparamagnetic material with saturation magnetization of 31 emu g-1. The Langevin equation was successfully applied for estimation of size of Fe3O4 nanoparticles in M-GO hybrid, with maximum error of 17.5%. The study put forward a formation mechanism for M-GO, based on instrumental analyses. Adsorption isotherms of Sr2+ and Co2+ ions, which were fitted by Langmuir monolayer... 

CdSe nanowires were grown in polycarbonate track etched membrane with pore diameter of 80 nm by an electrochemical deposition technique. The mechanism of the growth was studied during the potentiostatic deposition of nanowires. X-ray photoelectron spectroscopy and energy dispersive spectrometry results showed binding of fragments and fraction of atoms for the CdSe nanowires. Microstructure and morphology of synthesized CdSe nanowires were observed by scanning electron microscopy. Optical spectrophotometry technique was used to determine the energy band gap of CdSe nanowires. It was found that the nanowires were resistive in the dark and exhibited a pronounced visible light photoconductivity.... 

2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazatetracyclo dodecane (CL-20)-based polymer/plastic bonded explosives are used in propellant formulation. It can be predicted that CL-20-based nano-polymer/plastic bonded explosives are able to have reduced composite sensitivity and superior mechanical strength. In the current study, we have prepared two kinds of CL-20-based nano-polymer/plastic bonded explosives with ethylene-vinyl acetate copolymer and glycidyl azide polymer via the microemulsion method. Several visual techniques such as SEM/AFM/TEM techniques have been utilized for complete characterization of CL-20-based... 

The ion exchange process is a promising method for lithium extraction from brine and seawater having low concentrations of this element. To achieve this goal, it is vital to use an effective adsorbent with maximum lithium adsorption potential together with a stable structure during extraction and insertion of the ions. In this study, titanium dioxide and then lithium titanate spinel with nanotube morphology was synthesized via a simple two-step hydrothermal process. The produced Li4Ti5O12 spinel ternary oxide nanotube with about 70 nm diameter was then treated with dilute acidic solution in order to prepare an adsorbent suitable for lithium adsorption from local brine. Morphological and... 

A multicomponent polysaccharide obtained from dried tubers of certain natural terrestrial orchids was chemically modified by sulfonation using chlorosulfonic acid-dimethylformamide (HClSO3-DMF) complex as a reagent. For a structural characterization of salep sulfate 1H nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) spectra, and Thermogravimetric analysis (TGA) curves were recorded. The sulfate content of modified salep was determined using elemental analysis. This modified biopolymer was used to prepare a new environment-friendly heavy metal ion adsorbent, salep sulfate-graft-polyacrylic acid hydrogel (SS-g-PAA). Swelling rate and equilibrium water absorbency in various... 

TiO2-graphene (TiO2-GR) nanocomposites were synthesized using photocatalytic reduction method. TiO2-GR nanocomposites were thereafter doped with noble metals (Pt and Pd) by chemical reduction of the corresponding cations. The samples were characterized by different techniques. The addition of GR to TiO2 decreases the crystalline size of TiO2 due to the homogeneous dispersion of the TiO2 nanoparticles on GR sheets and prevention of coagulation of TiO2 nanoparticles during synthesis process. In addition, the surface area of TiO2 was increased by addition of GR and deposition of noble metals which helps to prevent agglomeration of graphene sheets and TiO 2 nanoparticles. Red shifts to the... 

In this research, bioactive glass (BG) of the type CaO-P2O 5-SiO2 and nanocrystalline forsterite (NF) bioceramic were successfully synthesized via sol-gel processing method. Heat-treatment process was done to obtain phase-pure nanopowders. After characterization of each sample, the nanocomposite samples were prepared by cold pressing method and sintered at 1000°C. The samples were fully characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR) analyses. The average nanocrystallite size was determined using the Debye-Scherrer's formula 19.6 nm. The bioactivity was examined in vitro...