Sharif Digital Repository

A tri-layered nanofibrous hydrogel thin film with temperature sensitivity is introduced as a new controlled drug release system to treat breast cancer. A simultaneous heat generation with the tunable release of dual drugs is observed in response to visible light radiation. A tri-layered nanofibrous sheet was fabricated through sequential electrospinning the blends of Au@Chit@DOX-loaded poly(N-isopropylacrylamide-co-N-methylol acrylamide) (poly (NIPAAm-co-NMA)) and Curcumin-loaded poly (vinyl alcohol) (Cu-loaded PVA), where the Cu-loaded PVA nanofibers (NFs) are sandwiched between two layers of Au@Chit@DOX-loaded poly (NIPAAm-co-NMA) NFs. After thermal crosslinking of the tri-layered... 

The slow kinetics of wettability alteration toward a more water-wetting state by low-salinity waterflooding (LSWF) in oil-brine-rock (OBR) systems is conjectured to be pertinent to the electrokinetic phenomena in the thin brine film. We hypothesize that the nanoscale physicochemical heterogeneities such as surface roughness and surface charge heterogeneity at the rock/brine interface control further the dynamics of electrodiffusion and electrostatic disjoining pressure (Πel), thus the time-scale and the magnitude of the low salinity effect (LSE). In this regard, film-scale computational fluid dynamics (CFD) simulations were performed. The coupled Poisson-Nernst-Planck (PNP) equations were... 

In this paper, the elastic solution to the problem of an isotropic bi-material full-space reinforced by a perfectly bonded thin film across the media interface and subjected to arbitrary asymmetric interfacial loading is addressed. To not include any simplifications, the thin film is first considered as a layer having a finite thickness, and with the aid of Fourier expansion of Muki's potential functions in Hankel transformed space, the formulation of the problem is obtained for a tri-material full-space. Then, knowing that the flexural stiffness of the thin film is negligible, its thickness and shear modulus are assumed to tend to zero and infinity, respectively, such that its in-plane... 

In the current study, thin-film nanocomposite membranes (TFN-Mx) based on a zwitterion-functionalized metal-organic framework (MOF) have been developed for the forward osmosis (FO) salt-water separation process. The active polyamide layer was formed through the interfacial polymerization of the m-phenylenediamine aqueous phase (with or without the presence of MIL-125-NH-CC-Cys) and the trimesoyl chloride organic phase. In comparison with the results from the surface of the unmodified membrane, a nanofiller-incorporated TFN-M0.10 membrane represents a smoother and more wettable surface that collaborates synergically to enhance the membrane antifouling ability. Among the examined membranes,... 

As developed countries’ ability to control infectious diseases increases, it has become clear that genetic diseases are a major cause of disability, death, and human tragedy. Coronavirus has recently spread throughout the world, and the capacity to detect low concentrations and virus changes can help to prevent the sickness from spreading further. In this paper, a surface plasmon resonance sensor based on nanostructured thin films and graphene as a 2D material has been designed with high sensitivity and accuracy to identify DNA-based infectious diseases such as SARS-CoV-2. The transfer matrix method assesses the effects of different structural factors, including nanolayer thickness on the... 

This study aims at investigating the effect of the substrate material on growth mechanism and also microstructure of Ta2O5 thin films. For this purpose, atomic force microscopy, scanning electron microscopy, and interferometry analyses were implemented to reveal the influence of silicon wafer and amorphous BK7 glass substrates on the nucleation and growth mechanisms of Ta2O5 thin films deposited via the radio frequency magnetron sputtering technique. Results indicated that those films with finer morphologies had relatively higher nucleation densities. Compared with BK7 glass substrate, crystals formed on the silicon wafer were shown to be finer and had lower mean areas in more nucleation... 

The type of passivating ligands and the ligand exchange method influence the quality of lead sulfide quantum dot films. This imparts on the efficiency of optoelectronic devices. To get a compact arrangement of the nanocrystals in a thin film (⁓100 nm) via self-assembling, we used organic-inorganic perovskites with mixed halides for the solid-state exchange of oleic acid ligands on PbS QDs (⁓ 4 nm). Formamidinium lead halides FAPbIxBr3-x (x= 3,2,1,0) were used. X-ray spectroscopy shows that successful replacement of oleic acid with FA happens by short immersion of the films (2 min) in the solution. Transmission electron microscopy shows that nano-scale cracks, short-range ordering, and fusion... 

In thin-film solar cells, deposition of pinhole and the crack-free absorber layer, with the right chemical stoichiometry is highly important for high-performance solar cell devices. In solution-based CIGS solar cell technology, a nanoparticle ink approach provides phase stability of the final chalcogenide absorber layer. However, the sintering of small nanoparticles to form large grains with reduced grain boundaries is an important challenge in the fabrication process. This is usually realized by annealing in the Se atmosphere, i.e. selenization process. However, the presence of Ga in CIGS films leads to pinholes after selenization. In this study, the synthesis and deposition of high-quality... 

Infection is a disease that is mainly caused by different Gram-negative and Gram-positive bacteria. Treatment of infections requires a considerable amount of antibiotics, which can cause serious damage to the patient's body. Delivering the antibiotic only to the site of infection can prevent these destructive effects, such as the destruction of the normal intestinal flora. The drug delivery system through carriers will take antibiotics into a part of the body involved in the disease. Niosome nanoparticles, which have been made from non-ionic surfactants, have been emerging as ideal drug/antibiotics delivery vehicles. Recently, niosome formulations have been targeted to reduce toxicity and... 

We introduce an effective method for copper indium sulfide selenide (CISSe) doping with different alkali metals (Li, Na and K) based on a pre-deposited alkali chloride layer. A simple and fast spray method is used for pre-deposition of alkali chloride layer (LiCl, NaCl, KCl) on substrate surface before spray pyrolysis deposition of copper indium disulfide CuInS2 (CIS) films followed by selenization. The different properties of alkali-doped CISSe films by the alkali chloride pre-deposition (ACPD) method were compared to the post-deposition treatment (PDT) method. Based on FESEM images, a highly compact film with large grains can be obtained for CISSe films doped with K(∼0.72 μm) and Na (∼0.56... 

In the current study, the prospect improvements on desalination and anti-fouling performance of polyamide (PA)-based TFN membranes modified with MIL-53-NH-Asp have been investigated. MIL-53-NH2 nanoparticles (NPs) have been treated through a single-step post-synthesis modification reaction to enhance the hydrophilicity feature and compatibility with the PA layer. Various concentrations of synthesized NPs were dispersed in an aqueous phase consisting m-phenylenediamine and 2,6-diaminopyridine monomers for incorporation in the PA rejection layer. Analysis data of fabricated membranes provide evidence of changes in their physico-chemical properties after NPs incorporation. In comparison with... 

In this work, synthesis of CuIn0.75Ga0.25S2 (CIGS) nanoparticles, the formation of stable dispersion, deposition of high-quality films and, fabrication of thin-film Perovskite solar cells are reported. The stability of nanoparticle ink is crucial in the formation of device-quality films. The chalcogenide-based materials are widely used in thin-film solar cells; in particular, Cu(In,Ga)S2 are used as an absorber and hole transporting layer. In the present study, the nanoparticles of about 20 nm size and bandgap of 1.5 eV are synthesized using a heat-up method. A variety of solvents are used as dispersing media and the stability of the inks is evaluated by precise optical monitoring. We... 

This study aims at investigating the effect of the substrate material on growth mechanism and also microstructure of Ta2O5 thin films. For this purpose, atomic force microscopy, scanning electron microscopy, and interferometry analyses were implemented to reveal the influence of silicon wafer and amorphous BK7 glass substrates on the nucleation and growth mechanisms of Ta2O5 thin films deposited via the radio frequency magnetron sputtering technique. Results indicated that those films with finer morphologies had relatively higher nucleation densities. Compared with BK7 glass substrate, crystals formed on the silicon wafer were shown to be finer and had lower mean areas in more nucleation... 

The current article discusses some unprecedented information about the improvement in forward osmosis (FO) performance of polyethersulfone/polyamide (PES/PA) membranes, mainly focused on water flux and selectivity along with resistance to fouling phenomenon; which itself is brought in by the introduction of pre-modified zeolitic imidazolate framework-8 MOF nanoparticles. An investigation has been conducted on ZIF-8 nanoparticles surface with hydrophilicity feature to evaluate their potential for utilization in active polyamide layer of FO membranes for the first time, free from any decrease in water flux value (when hydrophobic ZIF-8 is exploited solely) and selectivity (when mSiO2 with... 

In terms of manufacturability, there is a high tendency to deposit light-absorbing CuInS2 films by solution processing methods like ink-based depositions. In particular, for nanoparticle inks, the synthesis of highly dispersed and stable inks, with uniformity in the deposition process, is a serious challenge. Here, we demonstrate a novel two-step low-temperature CuInS2 film deposition method in which the In2S3 is deposited first. It then partially is converted into CuInS2 through the infiltration of Cu+ ions in the In2S3 layer in a dip-coating process. The resulting films are highly uniform, with diffraction peaks indicating the formation of pure CuInS2 phase. The proper stoichiometry of... 

Hematite (α-Fe2O3) is a promising candidate for water oxidation applications due to its abundance in the earth crust and its suitable bandgap. However, hematite performance is severely limited by electron-hole recombination at its interface with the electrolyte; something that can be addressed using electrocatalysts. In this report, we evaluate the influence of a ternary NiFeCo co-catalyst to enhance the water oxidation performance of hematite photoanodes. Thus, NiFeCo co-catalyst is optimized for hematite thin films with i) dense and ii) porous (nano-rod) morphologies. Both hematite films are prepared using electron beam evaporation method followed by an annealing step and NiFeCo... 

In this work, synthesis of CuIn0.75Ga0.25S2 (CIGS) nanoparticles, the formation of stable dispersion, deposition of high-quality films and, fabrication of thin-film Perovskite solar cells are reported. The stability of nanoparticle ink is crucial in the formation of device-quality films. The chalcogenide-based materials are widely used in thin-film solar cells; in particular, Cu(In,Ga)S2 are used as an absorber and hole transporting layer. In the present study, the nanoparticles of about 20 nm size and bandgap of 1.5 eV are synthesized using a heat-up method. A variety of solvents are used as dispersing media and the stability of the inks is evaluated by precise optical monitoring. We... 

We report on the response of a monolithic high Tc transition-edge bolometer to about 3 mmWave for the first time. The detector structure consisting of 400-nm YBa2Cu3O7-x(YBCO) film on buffered yttria stabilized zirconia substrate without any coupled antenna, shows bolometric type responsivity to the 3-mmWave radiation at its transition temperature. The YBCO thin film Ce0.9La0.1O2 buffer layer are both fabricated by the metal-organic deposition method. The meander line pattern of the bolometer is designed for obtaining maximum absorption and responsivity possible when the polarized radiation of the source is aligned with the pattern. Meander lines are 50 micrometers wide and 1.5-mm long. We... 

Wettability alteration is the principal low-salinity-effect (LSE) in many oil-brine-rock (OBR) systems. Our recent experimental results have demonstrated that wettability alteration by low salinity is slow. It is expected that the electrical behavior of oil/brine and rock/brine interfaces and the water film geometry control both the transient hydrodynamic pressure, and the time-scale of ionic transport in the film, thus the kinetics and degree of wettability alteration. In this paper, the electro-diffusion process induced by the imposed ionic strength gradient is simulated by solving Poisson-Nernst-Planck equations in a water film bound between two charged surfaces, using a finite... 

Multi-component nanocomposite thin films (composed of cellulose nanofiber (CNF), alginate, bioglass nanoparticles (BG NPs) and gentamicin) were prepared by using cathodic electrophoretic deposition (EPD) under different isostatic pressures of 10−2 mbar (LP), atmospheric (AP), and 5 bar (HP). According to thermal gravity analysis, larger amounts of CNF and alginate could be deposited on the surface at the AP condition in comparison with the LP and HP conditions. On the other hand, higher amounts of the BG NPs could be deposited at the LP condition as compared to the other conditions. The drug (gentamicin) loading/releasing of the samples prepared at the HP condition was found to be higher...