Sharif Digital Repository

The solar collectors absorb solar irradiation and then produce thermal energy; however, they cannot generate electrical power. Electricity and thermal energy can be produced by the photovoltaic thermal module, simultaneously, while the outlet temperature of the photovoltaic thermal module is not usually high enough to provide thermal requirements of a building such as hot water or space heating. This work proposes a novel compound system created by the connection of a solar collector in series with a photovoltaic thermal module to resolve the issue of low outlet temperature in the photovoltaic thermal module and lack of electrical power in solar collectors. To examine the feasibility of this... 

Manta ray swimming or bio-inspiration propulsion system, as a special type of marine propulsion system, is used for submersible vehicles that require high-speed maneuverability and stability, such as glider and AUV. In a manta ray swimming, the thrust force is generated by a couple of undulation and oscillation of wing, so that the direction of undulation wave and oscillation is upright and perpendicular to the direction of thrust force, respectively. It is possible to combine these two movement modes (flapping motion) on the three-dimensional model without considering the effects of wing twisting and flexibility to simplify and better understand the physical behaviors or special study of... 

Among the parameters affecting the critical velocity in tunnel fires, the tunnel cross-sectional shape could significantly affect the tunnel fire characteristics, mainly due to the wall-bounded physics of the tunnel fire. Previously, the effects of the cross-sectional geometry of the tunnel were calculated using the non-dimensional analysis and hydraulic height of the tunnel. The dimensionless analysis using hydraulic height calculates only the effects of the tunnel sizes and does not capture the effects of the shape of the tunnel cross-section. Developing a 3D computational fluid dynamics tool using the body-fitted grids, the critical velocities are calculated for the 7 different... 

A coupled statistical and conditional generative adversarial neural network is used for 3D reconstruction of both homogeneous and heterogeneous porous media from a single two-dimensional image. A statistical approach feeds the deep network with conditional data, and then the reconstruction is trained on a deep generative network. The conditional nature of the generative model helps in network stability and convergence which has been optimized through a gradient-descent-based optimization method. Moreover, this coupled approach allows the reconstruction of heterogeneous samples, a critical and serious challenge in conventional reconstruction methods. The main contribution of this work is to... 

Background and Objective: Blood flow variation during cardiac cycle is the main mechanism of atherosclerotic development which is dependent on. Methods: The present work mainly tends to investigate stenosis effect in dynamic curvature of coronary artery. This paper presents numerical investigations on wall shear stress profiles in three-dimensional pulsatile flow through curved stenotic coronary arteries for both static and dynamic model. In order to do so, three-dimensional models related to the curved arteries with two degrees of stenosis (30% and 50%). Results: Lower amount of wall shear stress is found near the inner wall of artery distal to the plaque region (stenosis) and in both... 

In this work, a mathematical model was developed to simulate the urinary concentration mechanism. A 3-D geometry was derived based on the detail physiological pictures of rat kidney. The approximate region of each tubule was obtained from the volume distribution of structures based on Walter Pfaller's monograph and Layton's region-based model. Mass and momentum balances were applied to solve for the change in solutes concentration and osmolality. The osmolality of short and long descending nephrons at the end of the outer medulla was obtained to be 530 mOsmol/kgH2O and 802 mOsmol/kgH2O, respectively, which were in acceptable agreement with experimental data. The fluid osmolality of the short... 

Stress sensitivity is a phenomenon that affects reservoir rock properties, such as permeability and therefore changes the well pressure transient behavior. This paper aims to study these behaviors in stress sensitive reservoirs and evaluate the pressure loss in such reservoirs during the process of hydrocarbon production. A power model is used to correlate the changes in permeability with pore pressure. A novel semi-implicit three-dimensional finite element method has been employed to numerically solve the flow problem. The numerical results have been validated by analytical results obtained in a non-sensitive reservoir. Pressure drawdown test for different scenarios has been studied. The... 

In this study, coupled Generative Adversarial and Auto-Encoder neural networks have been used to reconstruct realizations of three-dimensional porous media. The gradient-descent-based optimization method is used for training and stabilizing the neural networks. The multi-scale reconstruction has been conducted for both sandstone and carbonate samples from an Iranian oilfield. The sandstone contains inter and intra-grain porosity. The generative adversarial network predicts the inter-grain pores and the auto-encoder provides the generative adversarial network result with intra-grain pores (micro-porosity). Different matching criteria, including porosity, permeability, auto-correlation... 

Two and three dimensional modeling of a single cell of vanadium redox flow battery has been done thoroughly according to electrochemical and fluid mechanic equations in this study. The modeling has been done in stationary state and its results have been presented in three chemical, electrical and mechanical sub models. The parametric analysis on some of important factors in cell operation demonstrated that increase in electrode and membrane conductivity and electrode porosity contributes to electric potential increase in cells. Also operational temperature increase leads to decrease in cells' voltage. Better fluid distribution on the electrode surface area results in better cell operation,... 

A three-dimensional model has been developed to describe the multiphase release of macromolecular drugs encapsulated in a hydrogel. The heterogeneity of network mesh size was considered by assigning varying diffusion coefficients to the network lattices randomly. Using a stochastic approach, the random nature of diffusion of drug molecules was captured within the network. The simplest form of distribution containing two diffusion coefficients was tested. To generate the drug release profiles for experimental validation under the limitation of computational cost, a simple scaling relationship was employed. Unlike the single-diffusivity model, the dual-diffusivity model showed good agreement... 

The connectivity of high conductivity pathways in geological formations depend on the spatial distribution of geological heterogeneities that may appear on various length scales. Appropriate modeling of this is crucial within in hydrology and petroleum systems. The approach taken in this study is to use percolation theory to quantify the connectivity, hydraulic conductivity, and breakthrough time behavior between an injector and a producer within such systems. In particular, a three-dimensional overlapping sandbody model is considered which assumes that the geological formation can be split into either conductive flow units (i. e., good sands) or non-conductive units (i. e., poor sands). The... 

The main objective of this paper is to provide comparative quantitative examinations on the capabilities of two-dimensional horizontal and pseudo-three-dimensional (3D) modelling approaches for simulating spatial and temporal variability of the flow and salinity in Lake Urmia, Iran. The water quality in the lake has been an environmentally important subject partly because this shallow hypersaline aquatic ecosystem is considered to be one of the largest natural habitats of a unique multicellular organism, Artemia urmiana. This brine shrimp is the major food source for many of the protected and rare shorebirds that visit the lake. A.urmiana can grow and survive in certain ranges of salinity,... 

In this paper, considering horizontal components of seismic excitation, an algorithm for the nonlinear multi-component analysis of building structures by the Endurance Time (ET) method is proposed, and results of the ET method for various steel moment frames with one to seven stories are verified by comparing with the results from Nonlinear Time History Analysis with use of two different sets of ground motions. In addition, several parameters such as eccentricities and irregularities in structure, rotational and lateral stiffness, effect of hysteresis type and ductility have been considered for sensitivity analysis on results, obtained by ET method. Results show that on the basis of... 

The blade element momentum (BEM) theory is based on the actuator disc (AD) model, which is probably the oldest analytical tool for analysing rotor performance. The BEM codes have very short processing times and high reliability. The problems of the analytical codes are well known to the researchers: the impossibility of describing inside the one-dimensional code the three-dimensional (3D) radial flows along the span-wise direction. In this work, the authors show how the 3D centrifugal pumping affects the BEM calculations of a wind turbine rotor. Actually to ascertain the accuracy of the analytical codes, the results are compared with rotor performance, blade loads and particle image... 

The urine formation and excretion system have long been of interest for mathematicians and physiologists to elucidate the obscurities within the process happens in renal tissue. In this study, a novel three-dimensional approach is utilized for modeling the urine concentrating mechanism in rat renal outer medulla which is essentially focused on demonstrating the significance of tubule's architecture revealed in anatomic studies and physiological literature. Since nephrons and vasculatures work interdependently through a highly structured arrangement in outer medulla which is dominated by vascular bundles, a detailed functional unit is proposed based on this specific configuration.... 

In this study, a three-dimensional model has been utilized for predicting thermal responses during tungsten arc welding of AA2024-T4 plates in which double ellipsoidal heat source model was employed to consider the moving torch in the model. Furthermore, tensile and hardness tests and microstructural evaluations have been carried out to investigate the mechanical properties and the microstructures within the welded metal. The results show that there is a region inside the heat-affected zone where hardness increases while in some parts of this region having temperatures higher than 250 C the hardness decreases significantly. Furthermore, natural aging occurs after welding; however, its... 

Tunnels constructed using New Austrian Tunnelling Method (NATM) are always based on certain round (unsupported) advance lengths, after which, the temporary lining is placed. The settlement of the ground surface resulting from such construction is of high significance in design and practice. The existing data in this respect, however, is scarce. It is the aim of this paper to propose a semi-analytical procedure based on three-dimensional finite element analyses to predict the maximum surface settlement of the ground in NATM tunnels under different combinations of tunnel diameter, overburden depth, round length and soil and lining properties. The comparison of the results with three case... 

This paper presents the results of parametric analyses of the yielding moment (My) of Bolted Flush Endplate Beam (BFEB) splice connections using Finite Element Modeling (FEM) tools. The connection components were modeled using three-dimensional brick elements, while contact between the endplates was modeled using Coulomb friction. Materials for beam, endplate and bolts were considered to behave non-linearly. Finite element results with three experimental and numerical studies were compared, and all indicated good agreement, which is also briefly reviewed in this paper. Using verified FEM, fairly large parametric studies, based on the practical configuration of BFEB connections, were carried... 

The recruitment pattern of trunk muscles is determined using a three-dimensional model of the spine with two joints and six symmetric pairs of muscles in which both equilibrium and stability requirements are satisfied. Model predictions are verified using Anybody Modeling System (AMS) and Abaqus. The model is used to test the hypothesis that antagonistic muscle activities are necessary for the spinal stability. The model with stability constraints predicts muscle activities greater than those predicted without stability consideration. In agreement with experimental data, the stability-based model predicts antagonistic muscle activities. It is shown that spinal stability increases with trunk... 

Airflow simulation of the whole respiratory system is still unfeasible due to the geometrical complexity of the lung airways and the diversity of the length scales involved in the problem. Even the new CT imaging system is not capable of providing accurate 3D geometries for smaller tubes, and a complete 3D simulation is impeded by the limited computational resources available. The aim of this study is to develop a fully coupled 3D-1D model to make accurate prediction of airflow and particle deposition in the whole respiratory track, with reasonable computational cost and efficiency. In the new proposed method, the respiratory tree is divided into three parts to be dealt with using different...