Sharif Digital Repository

CdS/TiO2/graphene (CTG) nanocomposite thin films were synthesized by a facile production route. The TiO2/graphene (TG) nanocomposite was initially fabricated by sol-gel method in such a way that TiO2 nanoparticles loaded on graphene oxide (GO) sheet via photocatalytic process. Then, CdS nanoparticles were deposited on the TG thin film by successive ion layer adsorption and reaction process (SILAR) approach. Based on atomic force microscopy (AFM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses, the TG thin film possessed a larger surface area as compared with the pure TiO2 thin film due to presence of graphene sheet. UV/visible spectroscopy exhibited... 

The major purpose of this research is increasing the photocatalytic activity of TiO2 nanotube arrays by doping with sodium and carbon for using in water splitting as photoanode. The synthesized TiO2 nanotubes (TNA) were characterized using FESEM (Field Emission Scanning Electron Microscope), XRD (X-ray Diffraction), DRS (Diffraction Reflection Spectroscopy) and XPS test (X-ray Photoelectron Spectroscopy) analyses. The results of FTIR and XPS confirmed the presence of sodium and carbon in the lattice of TNA as dopants. Moreover, the DRS test showed the decrease in the band gap energy of TNA from 3.20 to ∼2.88 eV; uv-visible test exhibited extension in the absorption edge of pure TiO2... 

The main purpose of this research work is to investigate the effect of nickel as metal dopant on the morphology and photocatalytic activity of TiO2 nanotube arrays synthesized in the organic electrolyte by anodizing process containing sodium carbonate as an additive (TNAS). In order to characterize the synthesized nanotubes, various analyses such as FESEM, XRD, FTIR, XPS, DRS, and EIS were applied. The results of XPS and FTIR tests evaluate the participation of sodium (Na), nickel (Ni), and carbon (C) in the lattice of nanotubes as dopants. According to the DRS and UV-visible tests results, the band gap energy of TiO2 nanotube arrays decreases from 3.20 to ~ 2.64 eV as well as the absorption... 

The nanotubular arrays of titanium dioxide (TiO2 NTs) have recently received considerable interest for fabrication of dental and orthopedic implants. However, their antibacterial activity requires substantial improvement for the potential infections minimization, without compromise of their biocompatibility. In this work, TiO2 NTs were developed on Ti6Al4V substrates via anodization at a constant potential of 60 V for 60 min, followed by heat treatment at 500 °C for 90 min. Physical vapor deposition (PVD) was further employed to decorate silver oxide nanoparticles (Ag2O NPs) on the nanotubular edges. The results indicated that the highly-ordered TiO2 NTs with decorated Ag2O NPs could promote... 

TiO2 nanotube arrays (TNA) have been modified by cobalt phosphate (CoPi) through potentiostatic electrodeposition method. Different samples have been prepared by changing the loaded CoPi through the deposition time from 10 to 960 min. Formed catalytic materials have been characterized by different methods. Although charge transfer resistance of the CoPi/TNA photoanodes have been decreased from 5.5 to 4.0 kΩ by increasing the deposition time from 5 to 60 min, the maximum photoresponse was obtained for 10 min CoPi deposition leading to 24% more photocurrent compare to bare TNA which proposed optimum value for cobalt phosphate decoration. Based on field emission scanning electron microscopy... 

Zirconium based metal-organic frameworks (Zr-MOFs) are promising candidates for photocatalytic wastewater treatment due to their excellent properties such as high chemical and thermal stability and high photodegradation ability. Herein, we report a novel porous TiO2/ZrO2 photocatalyst derived from UiO-66 and Titania hybrids. UiO-66 nanoparticles was synthesized through solvothermal method and utilized as catalyst support to grow TiO2 particles on its surface. The prepared Titania/MOF nanocomposite was calcined to obtain porous TiO2/ZrO2 photocatalyst for degradation of organic pollutants from colored wastewater under LED visible light. The prepared materials were fully characterized with... 

Ordered perpendicular TiO2 nanotubes (TNT) with 405 to 952 nm length and 60 to 90 nm diameter were grown via 40 to 120 min anodization of Ti6Al4V flat substrates. The samples were called TNT-40, -60, -80, -100, and -120. Vancomycin was loaded on the bare and anodized electrodes by separate immersion and electrophoretic (EP) deposition procedures. EP loading resulted in storage capacity of 5221.86 μg cm-2 for TNT-80 which was much higher than 1036.75 μg cm-2 of immersed sample. Drug release comprised of three stages: (i) burst release (78% for the bare, and 23% for the TNT-80 sample), (ii) gradual transport (21% for the bare, and 64% for the TNT-80 sample), and (iii) equilibrium. Transfer... 

Ordered perpendicular TiO2 nanotubes (TNT) with 405 to 952 nm length and 60 to 90 nm diameter were grown via 40 to 120 min anodization of Ti6Al4V flat substrates. The samples were called TNT-40, -60, -80, -100, and -120. Vancomycin was loaded on the bare and anodized electrodes by separate immersion and electrophoretic (EP) deposition procedures. EP loading resulted in storage capacity of 5221.86 μg cm-2 for TNT-80 which was much higher than 1036.75 μg cm-2 of immersed sample. Drug release comprised of three stages: (i) burst release (78% for the bare, and 23% for the TNT-80 sample), (ii) gradual transport (21% for the bare, and 64% for the TNT-80 sample), and (iii) equilibrium. Transfer... 

Lignocellulosic materials are recalcitrant to bioconversion, due to their rigid physiochemical structure. In this work, the effects of Fe2O3–TiO2 and NiO–TiO2 nanoparticles (NPs) and FeCl3 and NiCl2 salts, on the anaerobic digestion (AD) of wheat straw have been investigated. For this purpose, metal oxide-TiO2 NPs were synthesized and fully characterized. Results showed that addition of 0.252 mg of NiO–TiO2/g total solids (TS) to batch assays resulted in increase of soluble chemical oxygen demand (COD) and 67% increase in volatile fatty acids (VFAs) concentration compared to control tests during the first 4 days of experiments. These results indicate that hydrolysis and acidogenesis rates... 

A novel nanohybrid composite of TiO2, SiO2, γ-Fe2O3, and reduced graphene oxide (TiO2@Si:Fe:rGO) is fabricated by the sol-gel method. The properties of the coated film were examined by structural and self-cleaning analyses using simulated discoloration/soiling and roofing tests. The fabricated transparent TiO2@Si:Fe:rGO composite showed excellent photoactivity and wettability, behaving well in self-cleaning applications. The addition of SiO2 improved the crystalline structure and surface hydroxylation of TiO2 nanoparticles. γ-Fe2O3 decreased the recombination rate of e-/h+ pairs, and significantly improved photocatalytic activity under visible light. Moreover, rGO sheets as excellent... 

Biocompatible and biodegradable three-dimensional scaffolds are commonly porous which serve to provide suitable microenvironments for mechanical supporting and optimal cell growth. Silk fibroin (SF) is a natural and biomedical polymer with appropriate and improvable mechanical properties. Making a composite with a bioceramicas reinforcement is a general strategy to prepare a scaffold for hard tissue engineering applications. In the present study, SF was separately combined with titanium dioxide (TiO2) and fluoridated titanium dioxide nanoparticles (TiO2-F) as bioceramic reinforcements for bone tissue engineering purposes. At the first step, SF was extracted from Bombyx mori cocoons. Then,... 

This research studied the effect of adding TiO2 nanoparticles along with Al2O3 and Y2O3 additives on the physical and mechanical properties of a SiC-matrix composite. The samples were fabricated through a pressureless process at 1900 °C. The results showed that the addition of TiO2 nanoparticles up to 4.5 wt% inhibited the excessive growth of SiC grains. According to the investigations, the microstructure and final properties of composites were affected by density, synthesized phases as well as their distribution in the matrix, and grain size. The highest density, Young's modulus, hardness, indentation fracture resistance, and flexural strength, alongside with the lowest brittleness index... 

Crystalline anatase TiO2 nanoparticles were synthesized in the gas phase using an H2O-assisted atmospheric-pressure CVS process. Simultaneous oxidation/hydrolysis of TiCl4 in the H2O-assisted APCVS process demonstrates the feasibility of facile fabrication and the designed synthesis of TiO2 nanoparticles in atmospheric pressure. Kinetics and thermodynamics studies of TiCl4 reactions in the gas phase illustrated oxidation or hydrolysis domination theoretically and were confirmed by experimental runs. Effects of H2O/O2 ratio on the reactions mechanisms, phase formation, size characteristics, morphology, and purity of TiO2 nanoparticles were experimentally studied using various analytical... 

Preparation of the defective TiO2 nanoparticles (NPs) have been recently in particular interest for its outstanding applications in visible-light active photocatalysis. In order to make TiO2 visible-light absorber, optical band gap should be modified especially via introducing structural defects like oxygen vacancies as an effective pathway. In this research, we prepared defective rutile TiO2 NPs with highly efficient photocatalytic activity under visible light. The NPs were synthesized by electric arc discharge in water as a cost-effective and environmentally friendly method with capability of defect formation which followed by heat treatment. The photocatalytic activity improvement... 

For the first time this work reports a new idea to develop a round-the-clock self-cleaning coating which was successfully applied to preserve cultural heritage and modern artifacts under sunlight illumination and at night. To fabricate this structure, namely, H2:TiO2/WO3@Pt, soft templating and hydrogen treatment approaches were selected to enhance the performance of TiO2/WO3 photocatalyst, together with the addition of Pt plasmonic nanoparticles. The coating can be photochemically charged in the presence of sacrificial electron donors and keep its stability, benefiting from the remained electrons stock for over 10 h to clean the surface from aggressive pollution also at night, in absence of... 

The most common reasons for hard-tissue implant failure are structural loosening and prosthetic infections. Hence, in this study, to overcome the first problem, different bioinspired coatings, including dual acid-etched, anodic TiO2 nanotubes array, anodic hierarchical titanium oxide (HO), micro- and nanostructured hydroxyapatite (HA) layers, and HA/chitosan (HA/CS) nanocomposite, were applied to the titanium alloy surfaces. X-ray diffraction and FTIR analysis demonstrated that the in situ HA/CS nanocomposite formed successfully. The MTT assay showed that all samples had excellent cell viability, with cell proliferation rates ranging from 120% to 150% after 10 days. The HO coating... 

Sulfur doped and pure micro-nanoporous TiO2 film were synthesized with PEO method to produce a film with a high surface area for photocatalysis applications. The effect of applied voltage and electrolyte concentration on the microstructure and photocatalytic properties of the prepared layer were investigated via SEM, XRD, EIS and DRS studies. Electrochemical Impedance Spectroscopy (EIS) was carried out in order to determine the corrosion and electrochemical properties of the produced layer. It was found that although the barrier layer resistance decreases with the voltage, the layers porosity and consequently the surface area increases. Finally the XRD and DRS spectrums were correlated with... 

The diffusion and deposition of TiO2 nanoparticles in EOR application was investigated in this paper. TEM image of nanoparticles showed that the particles are elongated with average long and short axis sizes of 54 and 15 nm. Water flooding tests showed that the recovery factor can be improved from 49% to 80% using TiO2 nanoparticles. Viscosity and interfacial tension measurements showed that by using TiO2 nanoparticles the viscosity of injected fluid and interfacial tension do not change significantly and can not explain the change in recovery factor. Contact angle measurements showed that nanoparticles deposition changed the wettability of the rock surface from oil-wet to water-wet. SEM... 

Zinc-TiO2 nano-composite coatings were synthesized by Direct Current (DC) and Pulse Current (PC) electrodeposition techniques. The effects of the plating parameters on the microstructure, codeposition percentage of TiO2 and corrosion behavior were investigated. The coatings morphology presents hexagonal grains perpendicularly oriented to the surface. Under DC conditions, TiO2 content of the coatings decreased with increasing TiO2 concentration of the electrolyte. Increasing applied current and TiO2 concentration in the bath leads to a fine microstructure with corrosion currents as low as 2.7 μA/cm2. Under PC conditions, incorporation rate of nanoparticles tends to increase with increasing... 

TiO2 nanostructures with different morphologies (spherical, tube, leaf-like and flower-like particles) were synthesized via a facile hydrothermal process. Polycaprolactone (PCL)/10 vol.% TiO2 nanocomposites were prepared by solvent casting methods. In vitro bioactivity of the nanocomposite films was examined by immersion in the simulated body fluid (SBF) for up to 28 days. It was found that the morphology of titania nanostructures significantly influence the in vitro bioactivity of PCL/TiO 2 nanocomposites. This observation was attributed to the amount of anatase phase and the specific surface area of the TiO2 nanostructures, which provide high surface exposure to SBF