Sharif Digital Repository

The catalytic wet peroxide oxidation (CWPO) of phenol with activated carbon (AC) as the catalyst has been successfully tested in a novel type of two-impinging-jets reactor (TIJR). The TIJR is characterized by a high-intensity reaction chamber, which is separated by a perforated plate from other parts of the reactor. The perforated plate was used as a filter to keep the catalyst particles within the reaction chamber. The influences of various operating and design parameters such as jet Reynolds number, feed flow rate, internozzle distance, and the jet diameter on the performance capability of the TIJR were investigated. As a result of the impinging process, turbulence, complex trajectory of... 

The impacts of salinity adjustment of displacing fluid have recently gained special attention to enhanced oil recovery (EOR). Different mechanisms have been studied widely in the literature while some of them are still subjugated to more scrutiny. The effects of diluted sea water on the interfacial properties of brine and asphaltenic-acidic crude oil and the wettability alteration of carbonate reservoir rock are investigated in this experimental observational work. The measurements of interfacial tension (IFT) and contact angle (CA) as two main parameters are studied. Besides, the effects of asphaltene and resin in the crude oil on the IFT values between the crude oil and aqueous solution... 

In this work, the synthesis and characterization of a new nanocomposite from carbon nanotubes-graft-polymer (CNTs-g-P) is reported. The products were obtained by the filling of multi-walled carbon nanotubes (MWCNTs) (inner diameter 2040 nm) with CoFe2O4 magnetic nanoparticles, been grafted with poly (caprolactone). The filling process was carried out by using acid treatment through wet chemistry. The structure and the properties of the new nanocomposite were studied with TEM, VSM, TGA, and spectroscopic techniques. © 2009 World Scientific Publishing Company  

In this study, the effect of different parameters on the fluid transport in a fractured micromodel has been investigated. All experiments in this study have been conducted in a glass micromodel. Since the state of wetting is important in the micromodel, the wetting experiments have been conducted to determine the state of wetting in the micromodel. The used micromodel was wet by water and non-wet regarding normal decane. The fracture network, distribution of pore size, matrix construction, and injection rate are the most important parameters affecting the process. Therefore, the influence of these parameters was studied using five different patterns (A to E). The obtained results from... 

Although several investigations have studied the low-salinity water injection (LSWI) performance during the past decades, the effect of crude oil type on the interfacial tension (IFT) and wettability alteration is still in dark. In this regard, this study is aimed to obtain the thermodynamic energies including adhesion, cohesion and spreading coefficient during LSWI. To achieve this goal, IFT and static contact angle values of three different crude oils (i.e. light, medium and heavy) are measured as a function of sea water salinity. The obtained results revealed that the dilution of sea water can change the wettability of reservoir rock from oil wet state towards water wet state, while crude... 

Recently, wettability alteration has been much attended by researchers for studying well productivity improvement in gas condensate reservoirs. Previous studies in this area only utilized water/alcohol based chemicals for this purpose. While, hydrocarbon nature of the blocked condensate in retrograde gas reservoirs, may motivate application of hydrocarbon based chemical agents. In this study, a new hydrocarbon based wettability modifier is introduced to alter wettability of carbonate and sandstone rocks to preferentially gas wetting condition. Static and dynamic contact angle measurements, spontaneous imbibition and core flooding tests were conducted to investigate the effect of proposed... 

Relative permeability curves of two-phase flow in a fracture have been a subject of study in recent years. The importance of these curves have been widely observed in multidisciplines, such as water subsurface resources, geothermal energy and underground hydrocarbon resources, especially fractured oil and gas reservoirs. Extensive experimental studies have been cited alongside the numerical studies in this area. However, simple analytical and practical solutions are still attractive. In the current study, wettability effects and phase interference explicitly were tried to be implemented in a simple analytical formula. The wettability effects are represented by residual saturations which... 

CaO–La2O3 mixed oxides were synthesized by co-precipitation coupled with Li doping through wet impregnation. These were used as catalysts for transesterification of canola oil and methanol toward biodiesel production. To determine the structure and morphology of the prepared catalysts, they were characterized by the XRD, FESEM, BET, and basic strength measurements. Under optimum reaction conditions of methanol/oil molar ratio of 15:1, 5 wt% catalyst at 65 °C, 96.3% conversion was obtained in 2.5 h of reaction duration. Moreover, the catalyst demonstrated a rather high stability where reuse of up to five cycles without significant loss of performance observed. © 2016 The Korean Society of... 

Changing the wettability of reservoir rock towards strongly water-wet state is effective way to enhance oil recovery from fractured carbonate reservoirs which are typically oil-wet. Regarding this fact, the injection of surfactant and the bacterial solution as EOR agents is proposed in the current work as a potential method to alter the wettability of rock surface reservoir. Nevertheless, there is a definite lack of experimental data regarding this method and the synergistic effect of both chemical and bacterial solutions on this process. In this study, the sole and combined effects of the bacterial solution using an Enterobacter cloacae strain as a biosurfactant-producer are compared with... 

The wetting condition of the reservoir rock is the key to the success of any EOR technique and the ultimate oil recovery. Wettability is dictated by the surface chemistry related to the interactions between the fluids and the rock surface which determines the stability of the water film between the rock and the oil phase. Streaming potential measurement is one of the electrokinetic techniques used to determine the average zeta potential of porous rock which can provide reliable information on fluid-rock interaction and wettability state of the rock surface. Streaming potential measurement has recently been introduced in the oil reservoirs applications and there are still significant... 

Smart water injection is determined as an effective EOR process to change the wettability and interfacial tension for better micro/macro sweep efficiencies. This water contains reactive ions such as Mg ∧(2+), Ca ∧(2+) and SO-4 ∧(2-) which can act as potential determining ions and change the surface charge of calcite rocks. One of the major concerns in the execution of an effective waterflood, especially in tight carbonate reservoirs, is the incompatibility between the formation brine and the injecting water. This research work aims to investigate the most important challenge of waterflooding process related to the possible formation damage because of inorganic scale deposition during... 

This paper deals with the dynamics of rising bubbles attached to a vertical wall under different wettability conditions. Even though, bubbles rising freely in a liquid have extensively been studied, bubbles attached to a wall have not been fully understood. Therefore, in this work, rising bubbles attached to a vertical wall were numerically investigated by applying the ALE method along with adaptive mesh refinement schemes to properly resolve the bubble interface and its deformation. To consider wall wettability effects, different contact angles of 45° 90° and 105° were considered along with the case of freely rising bubbles. The problem was carried out at different Bond numbers of 0.27,...