Sharif Digital Repository

Multi-layer schemes have been proposed for steganography. Also some authors have combined these methods with the idea of wet paper codes and gained higher embedding efficiency. This paper proposes a generalized multi-layer method for wet paper embedding. First, the cover bits are divided into blocks and, by combining these bits in groups of 3, a pyramid is formed. Next, the secret message is embedded through a layer-by-layer procedure. The proposed method has higher embedding efficiency in some cases and provides more flexibility for choosing the embedding payload, especially in lower payload conditions  

In this work, the process of free gravity drainage under the influence of ultrasonic waves was investigated. A glass bead pack porous medium was used to perform free fall gravity drainage experiments. The tests were performed in the presence and absence of ultrasonic waves, and the data of recovery were recorded versus time under both conditions. The wetting phase relative permeability curves were obtained using the data of recovery versus time, based on the Hagoort backward methodology. Subsequently, using the wetting phase relative permeability curve, the relative permeability of non-wetting phases were calculated by performing history matching to the experimental production data. The... 

An index for characterizing wettability of reservoir rocks is presented using slope analysis of spontaneous imbibition recovery data. The slope analysis is performed using the known exact analytical solution to infinite acting period of counter-current spontaneous imbibition. The proposed theoretically based wettability index offers some advantages over existing methods: (1) it is a better measure of the spontaneous imbibition potential of rock (because the magnitude is directly proportional to the imbibition rate); (2) there is no need for forced displacement data; (3) there is no need for waiting until the spontaneous imbibition process ceases completely; and (4) the data needed to run the... 

Microscopic and macroscopic displacements of polymer flooding to heavy oil at various levels of salinity and connate water saturation have been investigated. Both oil-wet and water-wet conditions in fractured five-spot micromodel systems, initially saturated with the heavy crude oil are utilized. The primary contribution is to examine the role of salinity, wettability, connate water, and fracture geometry in the recovery efficiency of the system. The microscopic results revealed that the increase in the connate water saturation decreases the oil recovery, independent of the wettability conditions. Moreover, the increase in salinity of the injected fluids lowers the recovery efficiency due to... 

Microbial enhanced oil recovery (MEOR) refers to the process of using bacterial activities for more oil recovery from oil reservoirs mainly by interfacial tension reduction and wettability alteration mechanisms. Investigating the impact of these two mechanisms on enhanced oil recovery during MEOR process is the main objective of this work. Different analytical methods such as oil spreading and surface activity measurements were utilized to screen the biosurfactant-producing bacteria isolated from the brine of a specific oil reservoir located in the southwest of Iran. The isolates identified by 16S rDNA and biochemical analysis as Enterobacter cloacae (Persian Type Culture Collection (PTCC)... 

SUMMARY: In this paper, a numerical model is developed for the fully coupled hydro-mechanical analysis of deformable, progressively fracturing porous media interacting with the flow of two immiscible, compressible wetting and non-wetting pore fluids, in which the coupling between various processes is taken into account. The governing equations involving the coupled solid skeleton deformation and two-phase fluid flow in partially saturated porous media including cohesive cracks are derived within the framework of the generalized Biot theory. The fluid flow within the crack is simulated using the Darcy law in which the permeability variation with porosity because of the cracking of the solid... 

To obtain potentially applicable microorganisms to an effective in situ microbial enhanced oil recovery operation, bacteria that were compatible with the harsh conditions of a petroleum reservoir were isolated from a crude oil sample. The application of an oil spreading technique showed that all of the isolates were capable of producing biosurfactants from both the glucose and crude oil as carbon sources. The secreted biosurfactants could at least reduce the surface tension 20 mN/m and for one of the isolates; the surface tension value dropped below 40 mN/m. In addition, the contact angle measurements revealed that the produced biosurfactants could effectively alter the wettability of the... 

Green and simple synthesis strategies have gained tremendous popularity for the production of anisotropically-shaped noble metallic nanoparticles. The long-term stability of the produced particles, the short timescale of the target reaction(s), as well as the use of non-toxic chemicals, are pivotal features of a useful green procedure. Herein we describe a simple and convenient wet-chemical approach to synthesize stable, non-toxic and water-soluble small gold nanotriangles (GNTs) and gold nanospheres (GNSs) in one step at room temperature, using Tween 20 and Tween 80, respectively. A high level of purity and monodispersity was obtained for the GNTs, in addition to an excellent colloidal... 

In this article, smoothed particle hydrodynamics method is applied in order to study the free surface flow generated by two-dimensional planing flat plate. For this purpose, a two-dimensional smoothed particle hydrodynamics code is developed and validated by the well-known dam breaking problem. Four trim angles and three different velocities are considered to perform a parametric study to examine their physical effects. The obtained results from smoothed particle hydrodynamics are compared against the corresponding Reynolds-averaged Navier Stokes solutions. It is observed that at lower velocities, there exists a good agreement between the smoothed particle hydrodynamics and Reynolds-averaged... 

This Regular evaluation and analysis of river quality helps accurate management to reach acceptable quality. In this study, water quality indices (WQI) method applied to evaluate quality of Jajrood River which is one of the main sources of Tehran drinking water. It helps to subsidize management actions in Jajrood watershed. Sampling carried out for 9 years during 2001-2010 in 10 stations along the river in wet and dry stations to identify water quality and the main source of pollution. Results show water quality in all stations classifies as medium according to National Sanitation Foundation (NSF) and water quality index in wet season is better than the corresponding value in dry seasons.... 

In this study, a hybrid of silica nanosphere/multiwall carbon nanotube (MWCNT) has been synthesized by wet chemical method at room temperature. The effect of MWCNTs, silica nanospheres and hybrid nanostructures (80% silica nanosphere/20% MWCNT and 50% silica nanosphere/50% MWCNT) on the thermal conductivity of distilled water has been investigated. SDBS was used as the dispersant to stabilize nanomaterials in the aqueous suspension and its concentration was 1.5 times of the concentration of nanomaterials. As results show, by increasing the concentration of nanomaterials, effective thermal conductivity of nanofluids increased. The most and the least enhancement in the effective thermal... 

Parallel micro actuators are mostly fabricated using the wet etching process within which the presence of capillary force and the resulting pull-in instabilities can severely affect the success of the fabrication process. In the case the capillary force is large enough then the beam like structure of the micro actuators is collapsed. The current paper investigates; static behavior of microcantilevers under effect of capillary force. It is observed that with increasing the instability number defined in the paper, the deflection of the micro-cantilevers is increased. This study shows in the wet etching fabrication process, if the distance between the beam and substrate is small enough, the... 

Mesoscopic hydrodynamic equations are solved to investigate late-stage evolution of thin liquid films over step topographies. Different geometrical parameters including step height and initial position and configuration of resultant masses of dewetting (droplets) are probed to find their effects on the mass evolution of the system. Our results indicate that increasing the step height and locating the droplets close to the step enhance the dynamics and accelerate smaller droplet collapse  

A multi-component lattice Boltzmann scheme is used to investigate the dynamics of a wettability driven droplet within a microchannel. The driving force for the motion is created by a stepwise change in the wettability of the channel walls. Moreover, an analytical solution is developed for evaluation of the dynamics of the droplet inside the channel. The effects of various parameters such as the height of the channel, the wetting pattern of the channel walls, the viscosity and the density ratio on the dynamics are studied. Also, the effect of grooves of different sizes on the channel surfaces on the dynamics of the droplet is investigated for both hydrophilic and hydrophobic surfaces.... 

It has been shown that one kind of poly silicon particles with sizes ranging from 10-500 nm, can be used in oilfields to enhance the oil recovery of water injection by 15-20%. The contributing mechanism might be reducing the interfacial tension which appears through improving relative permeability of the oil-phase. However, fundamental understanding of how hysteretic behavior of relative permeability curves affected by nanosilica particles remains a topic of debate in the literature. In this study, water as well as water dispersed nanosilica particles floods was performed on sandstone rock sample saturated by light crude oil supplied from one of Iranian oil reservoir, and the relative... 

Most reservoirs in Iran are heterogeneous fractured carbonate reservoirs. Heterogeneity causes an earlier breakthrough and an unstable front which leads to a lower recovery. A series of experiments were conducted whereby the distilled water displaced n-Decane in strongly oil-wet glass micro-models containing a single fracture. Experimental data from image analysis of immiscible displacement processes are used to modify the Buckley-Leverett and fractional flow equations by a heterogeneity factor. It is shown that the heterogeneity factor in the modified equations can be expressed as a function of fracture length and orientation  

Mesoscopic hydrodynamic equations are solved to investigate coarsening dynamics of two interacting nanodroplets on chemically patterned substrates. The effects of different parameters such as the surface chemical pattern, the slip length, the profile of the disjoining pressure, the size of the droplets, and the contact angles on the coarsening are studied. Our results reveal that the presence of a chemical heterogeneity can enhance or weaken the coarsening dynamics depending on the pattern type and positions of the droplets on the substrate. Also increasing the contact angles to values larger than a critical value may qualitatively change the coarsening process, and the profile of the... 

In this article an attempt was made to fabricate defect-free asymmetric polysulfone (PSf) membranes for the separation of oxygen and nitrogen. The approach is based on the enhanced delayed demixing by blending surface modifying macromolecules (SMMs) in the casting solution and by immersing the cast film in isopropanol for a certain period before it is immersed in water. Different SMMs, including hydrophobic and charged SMMs, were synthesized, characterized, and blended to the host PSf. It was found that the charged SMM could indeed contribute to the removal of defective pores from the skin layer and enhancement of oxygen/nitrogen selectivity. The experimental results were further interpreted... 

Integrally skinned asymmetric membranes for the separation of O 2 and N 2 were fabricated by the phase inversion technique from polysulfone, polyetherimide, and polyimide. Two types of surface modifying macromolecules (SMMs) including hydrophilic SMM (LSMM) and charged SMM (cSMM) were synthesized and blended with the casting solution to modify the membrane surface. The cast film was then immersed in the first coagulant alcohol (methanol, ethanol, or isopropanol) for a predetermined period, before being immersed in the second coagulant (water). The SMMs used in these experiments were laboratory synthesized by the two-step process of polyurethane prepolymer synthesis and end capping, before...