Loading...

Hot workability of cast and wrought Ni–42Cu alloy through hot tensile and compression tests

Arjmand, M ; Sharif University of Technology

833 Viewed
  1. Type of Document: Article
  2. DOI: 10.1016/S1003-6326(16)64264-4
  3. Publisher: Nonferrous Metals Society of China
  4. Abstract:
  5. In order to analyze the flow behavior and workability of Ni–42Cu in cast and wrought conditions, hot deformation tests were performed at temperatures and strain rates within the ranges of 900–1150 °C and 0.001–1 s−1, respectively. Tensile tests showed a “hot ductility trough” at 950 °C for both alloys. The drop in hot ductility was more considerable in the cast alloy because of the sluggish dynamic recrystallization. The hot ductility drop and grain boundary cracking, particularly in the cast alloy, were attributed to the segregation of detrimental atoms to the boundaries. It was shown that the hot ductility of the wrought alloy could be improved with increasing strain rate. It was associated with increasing the fraction of dynamic recrystallization at higher strain rates. This finding corroborated the change in the mechanism of dynamic recrystallization with strain rate. The strain rate sensitivity and instability parameters calculated for the wrought alloy showed that the material is prone to strain localization at low temperatures, i.e., 950–1050 °C, and high strain rates of 0.1 and 1 s−1. Based on the tensile and compression tests, the best temperature range for a desirable hot workability was introduced as 1050–1150 °C
  6. Keywords:
  7. Hot compression ; Hot ductility ; Mechanical properties ; Ni–Cu alloy ; Compression testing ; Copper alloys ; Drops ; Ductility ; Dynamic recrystallization ; Dynamics ; Formability ; Grain boundaries ; Hot pressing ; Nickel ; Recrystallization (metallurgy) ; Tensile testing ; Cu alloy ; Ductility trough ; Grain boundary cracking ; High strain rates ; Hot deformation tests ; Strain localizations ; Strain rate sensitivity ; Temperature range ; Strain rate
  8. Source: Transactions of Nonferrous Metals Society of China (English Edition) ; Volume 26, Issue 6 , 2016 , Pages 1589-1597 ; 10036326 (ISSN)
  9. URL: http://www.sciencedirect.com/science/article/pii/S1003632616642644