Loading...

Effects of perforated anchors on heat transfer intensification of turbulence nanofluid flow in a pipe

Adibi, O ; Sharif University of Technology | 2020

695 Viewed
  1. Type of Document: Article
  2. DOI: 10.1007/s10973-020-09705-9
  3. Publisher: Springer Netherlands , 2020
  4. Abstract:
  5. In this paper, a study is conducted to determine the influences of perforated anchors on heat transfer intensification of turbulence nanofluid flow in a pipe. Six different turbulence models are used, and the results obtained by these models are benchmarked with the existing theoretical data to select the best turbulence model. The outputs showed that the k–ε–RNG–scalable wall function model has higher accuracy and so it is selected to simulate this problem. The influences of various parameters including the addition of perforation on the anchors, the perforation diameter (in the range of 1–5 mm), the Re number (in the range of 5000–25,000), and the volumetric concentration of nanoparticles (in the range of 1–5%) on the friction factor, convective heat transfer rate, and thermal enhancement factor of Al2O3/water nanofluid flow inside the enhanced pipe with anchors are studied. The outputs indicate that the friction factor associated with the anchors decreases with creating the perforations on the anchors. The usage of nanofluid is proper from both viewpoints of the heat transfer improvement and the pressure loss penalty because all thermal enhancement factors of the system are larger than unity. At Re = 5000, the thermal enhancement factor enhances about 12.28% by boosting the volumetric concentration of nanoparticles in the range of 1–5%. © 2020, Akadémiai Kiadó, Budapest, Hungary
  6. Keywords:
  7. Anchors ; Nanofluid ; Perforation ; Pipe ; Thermal enhancement factor ; Turbulence models ; Alumina ; Aluminum oxide ; Friction ; Heat convection ; Nanoparticles ; Pipe flow ; Wall function ; Convective heat transfer rates ; Friction factors ; Function modeling ; Heat transfer intensifications ; Nanofluid flow ; Pressure loss ; Thermal enhancement factors ; Volumetric concentrations ; Nanofluidics
  8. Source: Journal of Thermal Analysis and Calorimetry ; Volume 141, Issue 5 , 2020 , Pages 2047-2059
  9. URL: https://link.springer.com/article/10.1007/s10973-020-09705-9