Sharif Digital Repository

Concrete-filled polyethylene (PE) tubes (CFPT) are composite systems using the polyethylene tubes as confinement for the marine structures in the splash zone to extend the service life of structures subjected to harsh environments. However, thermal cycles in marine environments can affect the behavior of such composite systems. This paper evaluates the effect of concrete infill strength (30 MPa and 60 MPa), the number of thermal cycles (50, 100, and 150 cycles) ranging from 25 °C to 60 °C, and thermal cycle type (type A and B) on the compressive and bond response of CFPTs. Characteristics of control and conditioned concrete infill, PE tubes, and CFPTs were obtained by means of compression... 

The most common reasons for hard-tissue implant failure are structural loosening and prosthetic infections. Hence, in this study, to overcome the first problem, different bioinspired coatings, including dual acid-etched, anodic TiO2 nanotubes array, anodic hierarchical titanium oxide (HO), micro- and nanostructured hydroxyapatite (HA) layers, and HA/chitosan (HA/CS) nanocomposite, were applied to the titanium alloy surfaces. X-ray diffraction and FTIR analysis demonstrated that the in situ HA/CS nanocomposite formed successfully. The MTT assay showed that all samples had excellent cell viability, with cell proliferation rates ranging from 120% to 150% after 10 days. The HO coating... 

This research reports the preparation and examination of Cadmium Telluride (CdTe) Quantum Dots and doping CdTe QDs with Europium (Eu), Gadolinium (Gd), and Manganese (Mn) prepared in aqueous solution using TGA as a capping agent. Magnetic QDs (MQDs) are important agents for fluorescence (FL) /magnetic resonance (MR) dual-modal imaging due to their excellent optical and magnetic properties. Herein, the chemical bonds, structural, fluorescence, and magnetized properties of CdTe QDs and effect of Mn, Eu, and Gd ions doping on their properties were examined by X-ray powder diffraction (XRD), high-resolution transmission electron microscopy (HRTM), Energy-dispersive X-ray spectroscopy (EDX),... 

Usage of concrete-filled pultruded glass fiber-reinforced polymer (GFRP) tubes (CFPGT) as columns can increase the service life of structures. However, marine structures such as oil platforms are always prone to fire because of the low resistance to the elevated temperatures. The purpose of this investigation is to evaluate the effects of concrete core strength (30 and 60 MPa), and exposure temperature (25, 100, 200, 300, and 400 °C) and time (60 and 120 min) on the compressive and bond behavior of CFPGTs. The properties of unexposed and exposed concrete core, pultruded GFRP hollow tubes, and CFPGTs were determined via compressive and disk-split tests. Also, the push-out test was used to... 

This research aims to present asphaltene fraction of oil by FTIR spectrum technique. For this purpose, three different oil samples with various SARA contents and almost identical API degrees were utilized in this research. Two asphaltenic oil samples were referred to as ‘A’ and ‘B’, and the aliphatic oil sample was named as ‘C’. First of all, the asphaltene fraction was extracted through the IP-143 test. The possible chemical bonds and functional groups were identified through NMR tests. Then, the FTIR spectrums of the oil samples and the extracted corresponding asphaltene fractions were taken. The interpretations were used to find the functional groups in the FTIR of the oil samples that... 

In our previous report (J. Phys. Org. Chem., 2017), we discussed the dual behavior of gold nanocluster (Au3 NC), where it scavenged reactive oxygen species (ROS) while promoted their generation to a lesser extent. Continuing this quest, we investigate the effects of Au3 NC on common reactive nitrogen species (RNS: O=N˙ and O=N-O) and their precursors (O=N-H and O=N-O-H, respectively), at B3LYP/LACVP+* level of theory. We compare the results with those of prevalent ROS (H-O˙ and H-O-O˙) and their precursors (H-O-H and H-O-O-H, respectively). To this end, various parameters are probed such as binding energy (Eb), bond dissociation energy (BDE), bond lengths, Mullikan spin density (MSD),... 

To improve the biocompatibility and corrosion resistance of 316L SS (Stainless Steel) metal implants, HAp(hydroxyapatite)/TiO2/Al2O3 nanocomposite coating was created using dip sol-gel method sintered at 550 °C. The weight percentage of TiO2+ Al2O3 in these coatings was 20, 30, and 40% wt. In this study, characterization was performed using FTIR (Fourier-Transform Infrared Spectroscopy), XRD, FE-SEM (Field Emission Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), DLS (Dynamic Light Scattering), Pull-off, and AFM (Atomic Force Microscopy) analysis. The potentiodynamic polarization and EIS (Electrochemical Impedance Spectroscopy) were performed in the simulated body fluid... 

In our previous report (J. Phys. Org. Chem., 2017), we discussed the dual behavior of gold nanocluster (Au3 NC), where it scavenged reactive oxygen species (ROS) while promoted their generation to a lesser extent. Continuing this quest, we investigate the effects of Au3 NC on common reactive nitrogen species (RNS: O=N˙ and O=N-O) and their precursors (O=N-H and O=N-O-H, respectively), at B3LYP/LACVP+* level of theory. We compare the results with those of prevalent ROS (H-O˙ and H-O-O˙) and their precursors (H-O-H and H-O-O-H, respectively). To this end, various parameters are probed such as binding energy (Eb), bond dissociation energy (BDE), bond lengths, Mullikan spin density (MSD),... 

To improve the biocompatibility and corrosion resistance of 316L SS (Stainless Steel) metal implants, HAp(hydroxyapatite)/TiO2/Al2O3 nanocomposite coating was created using dip sol-gel method sintered at 550 °C. The weight percentage of TiO2+ Al2O3 in these coatings was 20, 30, and 40% wt. In this study, characterization was performed using FTIR (Fourier-Transform Infrared Spectroscopy), XRD, FE-SEM (Field Emission Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), DLS (Dynamic Light Scattering), Pull-off, and AFM (Atomic Force Microscopy) analysis. The potentiodynamic polarization and EIS (Electrochemical Impedance Spectroscopy) were performed in the simulated body fluid... 

To improve the biocompatibility and corrosion resistance of 316L SS (Stainless Steel) metal implants, HAp(hydroxyapatite)/TiO2/Al2O3 nanocomposite coating was created using dip sol-gel method sintered at 550 °C. The weight percentage of TiO2+ Al2O3 in these coatings was 20, 30, and 40% wt. In this study, characterization was performed using FTIR (Fourier-Transform Infrared Spectroscopy), XRD, FE-SEM (Field Emission Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), DLS (Dynamic Light Scattering), Pull-off, and AFM (Atomic Force Microscopy) analysis. The potentiodynamic polarization and EIS (Electrochemical Impedance Spectroscopy) were performed in the simulated body fluid... 

Isothermal solidification stage during transient liquid phase bonding is the key to preclude intermetallic phase formation during solidification of the liquid phase. The rate of isothermal solidification is controlled by solid-state diffusion. Therefore, the bonding time required to complete isothermal solidification is generally long. This paper reports a very short isothermal solidification time for transient liquid phase bonding of IN617 solid solution nickel-based superalloy using a boron-containing filler metal. A eutectic-free bond with limited grain growth in the base material with high shear strength is achievable by utilizing a short (i.e., 5 minutes) thermal bonding strategy. The... 

The unusual monosaccharaides such as deoxy-hexose sugars, including methyl-pentose and aldo-pentose, are promising and important sugars in life science. However, little research on H-bond interactions in these systems has been reported. The aldo-pentose has a proton instead of the CH2OH group on C5; conversely, methyl-pentose has a CH3 group on C5. The aim of the present study is to investigate the role and nature of intramolecular H-bonds on acidity of CH3-pentose sugars (L-fucose and L-rhamnose) and aldo-pentose sugars (D-xylose, L-lyxose, D-ribose, and L-arabinose) using B3LYP/6-311++G (d, p) level. The calculated acidity values (ΔHacid) of these Dexoy-hexose were found to be from 343 to... 

Ammonium polyphosphate (APP) is one of the most widely used halogen-free flame retardant, added in various resins to improve the fire properties, such as flame and smoke spread ratings and LOI, of fiber-reinforced polymer (FRP) composites. This paper experimentally investigates the effects of using APP, as a fire-retardant filler, on mechanical properties (i.e. ultimate tensile, flexural, and bond strength) of glass fiber-reinforced polymer (GFRP) and carbon fiber-reinforced polymer (CFRP) composites. Based on two fiber types (i.e. carbon and glass) and three different APP mass fractions in resin (i.e. 0, 20, and 40% of total weight of matrix), six sets of specimens were prepared for each... 

In the present work the effect of simultaneous doping of carbon and nickel on the microstructural, optical, and electrical properties of barium strontium titanate (BST) is investigated. Thin films of BST were prepared by the sol-gel method in six different compositions ((Ba0.6Sr0.4)(NixCyTi1-x-y)O3): x = y = 0.00 (BST), x = 0.04 y = 0.00 (BST4N), x = 0.04 y = 0.01 (BST4N-1C), x = 0.04 y = 0.02 (BST4N-2C), x = 0.04 y = 0.03 (BST4N-3C), and x = y = 0.04 (BST4N-4C). Structural features and chemical bonds of the films were studied by TGA/DSC, XRD, FT-IR, and FE-SEM. The electrical and optical properties of the films were analysed by impedance spectroscopy and UV–VIS spectroscopy. The results... 

Usage of masonry system in many regions of the world like the Eastern Mediterranean, the Middle East, India, and China is still significantly high, despite their highly energy and intensive emission. Most of the failures in this system are caused by low ductility of cement mortars. This type of failure could be seen in masonry structures in areas in east Iran after Kermanshah earthquake in 2017. The present study investigates the shear bond characteristics of structures constructed by masonry using green materials. “Taftan” natural pozzolan and two types of rice husk ash (RHA) were used in mix design of used mortars as green materials. In this investigation, a modified direct shear test... 

This research investigated the long-term environmental effects on the bond at the interface between fiber-reinforced polymer (FRP) and a masonry brick. Seven types of FRP fabrics were used and placed on the masonry brick using the wet lay-up technique. Unidirectional and bidirectional fibers made of aramid, carbon, and glass and also combination of these fabrics were used. A total of 525 specimens were exposed to five chemical solutions with pH values of 2.5, 7, 10, 12.5 and substitution sea water for 1, 3, 6, 9 and 12 months. A chamber was also used to simulate the ultraviolent (UV) radiation on the specimens. A series of single-lap shear tests were performed on these specimens to determine... 

Composite coatings of Hydroxyapatite (HA) with ceramics, polymers and metals are used to modify the surface structure of implants. In this research, HA/TiO2 composite coating was fabricated by electrophoretic deposition (EPD) on 316 stainless steel substrate. HA/TiO2 composite coatings with 5, 10 and 20 wt.% of TiO2, deposited at 40 V and 90 s as an optimum condition. The samples coated at this condition led to an adherent, continuous and crack-free coating. The influence of TiO2 content was studied by performing different characterization methods such as scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDS), corrosion resistance in simulated body fluid (SBF),... 

This work describes coating of NiCoCrAlY on IN-738LC superalloy by high-velocity oxygen fuel (HVOF) process. Properties of the coatings are significantly influenced by oxygen/fuel ratio and other spraying parameters. The effect of oxygen/fuel ratio on the oxidation behavior, bond strength, hardness, roughness and microstructure including porosity, inclusion formation and unmelted particles are discussed here. The porosity and inclusion in C1 coating are maximal. C2 coating with oxygen/fuel ratio of 2 has the highest bond strength and the lowest unmelted particles. C3 coating with the lowest total porosity and inclusion has the minimal roughness and the highest oxidation resistance and... 

The advantages of fiber reinforced polymer (FRP), such as high specific strength, resistance against corrosion and formability, have made it a more acceptable alternative to conventional materials regarding repairing and retrofitting of structures. Although investigations in recent years have proved the concern of civil engineers about the environmental effects on the bond between FRP and concrete or masonry (especially moisture and temperature), only few researches have been reported on FRP-wood interfaces. This research investigated the effect of five different environments on the bond at the interface between FRP and wood. A series of pull-out tests were performed on 375 wood specimens... 

ZnO/CuO nanofibers, with different CuO concentrations, were fabricated by one-step electrospinning of the polymer precursor and annealing in air. Scanning electron microscopy (SEM) showed smooth and beadless morphology for the synthesized nanofibers, while X-ray diffraction (XRD) analysis revealed formation of hexagonal and monoclinic crystalline structure phases for ZnO and CuO nanofibers, respectively. X-ray photoelectron spectroscopy (XPS) analysis confirmed the presence of CuO on the surface of ZnO nanofibers. For further confirming the formation of chemical bonds, Fourier transform infrared (FT-IR) spectroscopy was employed. The effect of Cu contents in the overall electronic band...