Sharif Digital Repository

Molecules acting as antioxidants capable of scavenging reactive oxygen species (ROS) are of upmost importance in the living cell. Thymol derivatives exhibit various antioxidant activities and potential health benefits. Exploration of structure-radical scavenging activity (SAR) was approached with a wide range of thymol derivatives. To accomplish this task, the DPPH experimental assay along with quantum-chemical calculations were also employed for these compounds. By comparing the structural properties of the derivatives of interest, their antioxidant activity was explained by the formation of an intramolecular hydrogen bond and the presence of unsaturated double bond (–CHdouble bond; length... 

In this research, the application of equal channel angular extrusion process to produce both the cold-welded and diffusion-bonded Al/Cu bimetallic rods is assessed. The joints shear strength for both of the methods are measured and compared. The microstructure examinations were also carried out using scanning electron microscope equipped with EDX system and x-ray diffraction analysis. The results exhibit that the strength of the bond in cold-welded specimens is dependent on the amount of stretch and pressure at the materials interface. But in the diffusion-bonded specimens, it is depended on the struggle between the oxidation rate of the mating surfaces accompanied by inter-metallic... 

Bromophenols are known as antioxidant radical scavengers for some biomolecules such as those in marine red alga. Full understanding of the role played by bromophenols requires detailed knowledge of the radical scavenging activities in probable pathways, a focus of ongoing research. To gain detailed insight into two suggested pathways, H-atom transfer and electron transfer, theoretical studies employing first principle quantum mechanical calculations have been carried out on selected bromophenols. Detailed investigation of the aforementioned routes revealed that upon H-atom abstraction or the electron transfer process, bromophenols cause an increase in radical species in which the unpaired... 

Accumulative roll bonding (ARB) is used as a novel method to produce particle reinforced metal matrix composites (MMCs). Roll bonding of the sheets with layers of powder on their surfaces is the main stage in this process and it has been found that quality of the bonding has an important role in properties of the product. In this work, the behavior of alumina particles layer at interface during the rolling is investigated and the effects of particle size and amount of particle at interface on bonding of the commercial pure aluminum sheets are also studied. The results of peeling test indicate that presence of the powder at interface reduces the bond strength. However, it is shown that by... 

In this study, tensile strength of gypsum-based composite with aluminum fibers up to 15 vol.% was studied. To increase the interfacial bond strength between fibers and matrix, aluminum fibers were anodized under different conditions. Single fiber pull-out tests were carried out to investigate the bond strength. The interface was examined by scanning electron microscope. The ability of the composites to withstand longitudinal tensile load was also studied by tensile tests of dog bone-shaped, randomly oriented fiber-reinforced gypsum. By the introduction of aluminum fibers in gypsum as a randomly oriented composite, considerable increment in the strength is achieved and the toughness of the... 

Al-1100/St-12 aluminum clad steel sheets were produced using roll bonding process at different reductions in thickness and with various supplemental annealing treatments. Experiments were conducted by applying the Taguchi method to obtain optimum condition for maximizing the joint strength. The joint strengths of the bi-layer sheets were evaluated by peel test. The Al/Fe intermetallic phases at the joint interface and the peeled surfaces were examined using scanning electron microscopy (SEM). Energy dispersive spectroscopy (EDS) and Vickers microhardness test were performed to characterize the intermetallic compounds. The results indicate that at the optimum condition of 0.50 reduction in... 

The aim of this work is to produce two layered thin-walled Cu/Al composite tube by the spin-bonding process. The process is utilized to bond the aluminum tube into the copper one at thickness reductions of 20-60% and process temperatures of 25°C, 130°C, and 230°C. The bond strength is measured by T-peeling test, and the bond interfaces are examined by metallography and scanning electron microscopy (SEM). The results show that after a threshold thickness reduction of about 30%, the bond strength increased with the amount of deformation. SEM fractography of the peel surfaces confirms that the copper oxide film is broken in a shear manner during deformation. Severe shear strains applied during... 

We report a study on hydrogen storage in Ca, Co, Fe, Ni, and Pd decorated multiwalled carbon nanotubes (MWCNTs) by using two techniques: volumetric and electrochemical. The results showed that hydrogen molecules are adsorbed on the defect sites and transported to the spaces between adjacent carbon via diffusion through both defect sites and opened tips into the layers. Hydrogen storage capacity can be improved in the decorated MWCNT by Co, Fe, Ni, and Ca metals in two approaches: (i) H2 adsorption via Kubas interaction and (ii) dissociation of H2 molecules on the metal particles. The results reveal that Pd are more effective catalyst for hydrogen storage process. It was found that... 

The aim of this research is bonding of three-layered St/AZ31/St composite by roll-bonding process. The roll-bonding process was performed at three preheating temperatures, 340, 400 and 450°C, with thickness reduction of 30 to 68% and different thicknesses of intermediate layer (AZ31). In order to improve the bonding strength, the as-rolled specimens were annealed at constant temperature of 375°C. For evaluation of bond strength and investigating the formation of a diffusion layer, the results of peel test and microscopic images were studied. Tensile specimens were prepared along the rolling direction to measure the mechanical properties of the composite. The results showed that by increasing... 

The effects of intermediate nickel layer on seal strength and chemical compatibility of seal glass and interconnect materials for solid oxide fuel cells (SOFCs) were investigated. Two types of samples (metal/glass/metal sandwiches and glass coated metals) were prepared with the sheet of AISI 430 (nickel plated and uncoated) and slurry of compliant silicate sealing glass (SCN-1). The joined and coated samples were heated at 850 °C for different time durations (0.5-100 h). Tensile and impact tests were performed and SEM micrographs were used to analyze the glass/metal interaction. The results indicate that nickel plated AISI 430 shows higher adhesion strength at short durations of heating due... 

Abstract High ductility of metals as well as high strength of ceramics has made the metal/ceramic composites an attractive material for many applications requiring high strength to weight ratios. An important issue in using this material is the behavior of the material and its ceramic-metal interface under various loading, especially at high strain rate. To provide a better understanding of the interface conditions, in this work, a molecular dynamics study of the interface behavior in Al/α-Al2O3 composite as the result of tensile and shear loadings is presented. For this purpose, the reactive force field (ReaxFF) potential function is utilized. The effects of... 

HAp and HAp/ZrO2 composite coatings were successfully electrodepesited on 316L stainless steel substrates in the solutions containing ZrO2 particles at different concentrations. The effects of ZrO2 content on characteristics of the coatings were investigated using X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), scanning electron microscopy (SEM) and bonding strength test. Polarization and electrochemical impedance spectroscopy measurements were carried out in order to evaluate corrosion behavior of the coatings. In-vitro test in SBF and further SEM observations were performed to examine bioactivity of the coatings. HAp/ZrO2 composite coatings showed better... 

Gold nanoparticles (Au NPs) were synthesized by co-deposition of RF-sputtering and RF-PECVD from acetylene gas and Au target on the carbon nanotubes (CNTs). The CNTs were prepared by thermal chemical vapor deposition (TCVD) and Pd nanoparticles catalyst. TEM image shows that high-density and uniform distribution of Au NPs were grown on the CNTs. XRD analysis indicates that Au NPs have fcc crystal structure and CNTs have a good graphite structure. Raman spectroscopy results suggest that our sample includes double-walled CNTs. It is resulted that intensity of D-band reduces and G-band intensity raises and radial breathing mode (RBM) is changed by immobilizing of Au NPs on the CNTs. Raman... 

Solar energy exists extensively in all parts of the world. However the intermittency of solar energy presents critical challenges to PV system. The intermittency can be covered by storing solar energy in chemical bonds such as hydrogen. This process can be performed by photovoltaic powered electrolysis of water. The energy transfer efficiency between PV and electrolyzer is subject to the distance between maximum power points (MPP) of PV module and operating points. The operating points can be adjusted by optimizing the design parameters of the electrolyzer but the maximum power points are function of PV module characteristics, solar radiation and ambient temperature. Therefore the weather... 

In this study, two types of ionic liquids (ILs) based on 1 butyl 3 methylimidazolium [Bmim]+ and butyltrimethylammonium [Btma]+ cations, paired to tetrafluoroborate [BF4], hexafluorophosphate [PF6], dicyanamide [DCA], and bis(trifluoromethylsilfonyl)imide [Tf2N] anions, were chosen as adsorbates to investigate the influence of cation and anion type on the adsorption of ILs on the graphene surface. The adsorption process on the graphene surface (circumcoronene) was studied using M06 2X/cc pVDZ level of theory. Empirical dispersion correction (D3) was also added to the M06 2X functional to investigate the effects of dispersion on the binding energy values. The graphene···IL configurations,... 

The behavior of Alsteel bilayer sheets produced by cold roll welding is investigated through the wedge tearing process. It is observed that through tearing the energy absorbed by cold roll welded bilayer sheets is larger than that of non-welded ones, even though all parameters are identical. Also bilayer sheets with low bond strength have the same energy absorbed by non-welded bilayer sheets. By investigating all contributing mechanisms in tearing and mechanical properties of composite layers and developing theoretical equations, it is concluded that bending of sheets through wedge tearing plays a major role in difference of energy absorbed by welded and non-welded bilayer sheets. Moreover,... 

The purpose of this paper is to investigate the effects of annealing phenomena on the energy absorption of Al-steel bilayer sheets, bonded by cold rolling, through wedge tearing. Tearing by wedge is a dissipating energy system that includes three components: cutting, friction and plastic deformation due to bending. In order to find the bonding and annealing effects on energy absorption, the non-bonded bilayer sheets are prepared in the same condition of bonded ones. The results show that energy absorption of bonded sheets is larger than that of non-bonded ones. This is due to different plastic bending moment of bonded and non-bonded bilayer sheets. Whenever the bond is improved by heat... 

Utilizing the so-called tube spinning, a cold-bonding process entitled as "spin-bonding" is developed to produce seamless thin-walled clad tubes and cylinders. By this method, two layers of AA 1050 tubes were successfully bonded together to form a clad tube at room temperature. Based on mechanical aspects of the tube spinning process, the mechanism of spin-bonding is explained in two stages: surface preparation before occurrence of a stable bond and bond strengthening thereafter. The effects of process temperature, thickness reduction, feed rate and roller attack angle as the parameters of tube spinning on the bond strength are studied. It is shown that the bond strength increases by... 

The mechanism of interface formation during sinter-joining of nanostructured yttria stabilized zirconia (27 nm) compacts with chromium powder was investigated. The effect of sintering atmosphere, i.e. argon or vacuum, was studied. Microstructural evaluation and phase formation was examined by scanning electron microscopy (SEM), electron probe micro-analysis (EPMA), and micro-focused X-ray diffraction (MFXRD) methods. It is shown that spreading and evaporation-condensation mechanisms are responsible for the interface formation. An improved joint shear-strength was obtained after sintering in vacuum (74 MPa) compared with argon (41 MPa). The result of MFXRD indicated formation of Cr-island at...