Sharif Digital Repository

In this study, we have investigated the use of electrodeposited Au-Pt nanoparticles (AuPtNPs) on indium tin oxide (ITO) for the detection of Hg2+ heavy ions in water samples. The mechanism of AuPtNP electrocrystallization on ITO glass in an aqueous solution containing 0.5 mM HAuCl4 + 0.5 mM H2PtCl6 is described for the first time. The nucleation mechanism of monometallic AuNPs on ITO was found to be progressive; however, a transition from progressive to instantaneous was observed for bimetallic AuPtNPs at elevated overpotentials. The modified ITOs were then assessed for the electrodetection of Hg2+ in aqueous media. It was shown by differential pulse voltammetry (DPV) that the sensitivity of... 

A Zn-Rich (GaN)1−x(ZnO)xnanostructure was synthesized with the assistance of a high-gravity technique in order to reduce the reaction time and temperature. The synthesized inorganic nanomaterial has been applied in both drug and gene delivery systems, and as the first fully inorganic nanomaterial, it was investigated in a comprehensive cellular investigation as well. In order to increase the potential bioavailability, as well as the interactions with the pCRISPR, the nanomaterial was enriched with additional Zn ions. The nanomaterial and the final nanocarrier were characterized at each step before and after any biological analysisviaFESEM, AFM, TEM, FTIR and XRD. The polymer coated... 

Herein, MIL-101(Fe), CoFe2O4, novel binary (MIL-101(Fe)/CoFe2O4, MIL-101(Fe)/GO and CoFe2O4/GO), and ternary (MIL-101(Fe)/CoFe2O4/(3%)GO and MIL-101(Fe)/CoFe2O4/(7%)GO) magnetic composites based upon the MIL-101(Fe) were synthesized. The XRD, FESEM, TEM, EDX, BET-BJH, FTIR, VSM, DRS, PL, EIS and other electrochemical analyses were applied to characterize samples. The MIL/CoFe2O4/(3%)GO demonstrated the best performance compared to other samples for visible light photocatalytic and photo-Fenton-like degradation of Direct Red 23 (DtR-23), Reactive Red 198 (ReR-198) dyes as well as Tetracycline Hydrochloride (TC-H) antibiotic. Degradation of dyes using the ternary composite after 70 min of... 

H2S and CO2 are the main impurities in raw natural gas, which needs to be purified before use. However, the comprehensive utilization of H2S and CO2 has been ignored. Herein, we proposed a fully resource-based method to convert toxic gas H2S and greenhouse gas CO2 synchronously into CO and elemental S by using a novel electrochemical reactor. The special designs include that, in the anodic chamber, H2S was oxidized rapidly to S based on the I−/I3− cyclic redox system to avoid anode passivation. On the other hand, in the cathodic chamber, CO2 was rapidly and selectively reduced to CO based on a porous carbon gas diffusion electrode (GDE) modified with polytetrafluoroethylene and cobalt... 

Sufficient quantity of trace metals is essential for a well performing anaerobic digestion (AD) process. Among the essential trace elements in active sites of multiple important enzymes for AD are iron and nickel ions. In the present study, iron and nickel in the form of Fe2O3 and NiO were coated on TiO2 nanoparticles to be used in batch and continuous operation mode. The effect of TiO2, Fe2O3–TiO2, and NiO–TiO2 nanoparticles on each step of AD process was assessed utilizing simple substrates (i.e. cellulose, glucose, acetic acid, and mixture of H2–CO2) as well as complex ones (i.e. municipal biopulp). The hydrolysis rate of cellulose substrate increased with higher dosages of the coated... 

Metamaterials are manmade structures that have attained considerable attention over the past 2 decades in the modern fields like cloaking, sensing, and imaging owing to their ability to harness electromagnetic fields. In this regard, we have inspected the dielectric properties of the hyperbolic metamaterials (HMM) made of metallic nanorods and dielectric medium at the infrared wavelength regime. The periodically arranged subwavelength-sized metallic nanorods embedded in the silicon dioxide (SiO 2) substrate glass. The spacing between two adjacent nanorods is of subwavelength in size. Furthermore, effective permittivity of the metamaterial has been analyzed by employing the Maxwell Garnett... 

In this research, a series of NiO–MgO–SiO2 catalyst samples with various nickel contents (5, 10, 15 and 20 wt %) were prepared by a co-precipitation method followed by a hydrothermal treatment and employed in propane steam reforming. The analyses revealed that the enhancement of the nickel content up to 15 wt % improved the propane conversion to 98.6% at 550 °C. Nonetheless, further increase in the nickel loading reduced the catalyst activity due to the formation of larger and more poorly dispersed active sites. Besides, 15 wt % nickel loading led to the high resistance against coke deposition with no detectable carbon on the catalyst surface. In addition, it was revealed that, the decrease... 

In this study, 15 wt. % NiO-MgO-SiO2 catalysts modified by La2O3 promoter were prepared through a co-precipitation route and employed for syngas production via propane steam reforming. Various techniques including X-Ray diffraction, BET, TPR, CO2-TPD, CO-chemisorption, TPO, and Scanning electron microscopy were utilized to characterize the final samples. The results indicated that the incorporation of La2O3 enhanced the metal-support interaction providing less reducible Ni species. In comparison with the La-free catalyst, the promoted ones possessed higher metal dispersion and smaller Ni particles. Nonetheless, excessive amounts of La covering the active sites negatively decreased the Ni... 

Graphene oxide (GO) was chemically modified withpara-aminobenzoic acid (PABA) to immobilize copper(ii) ions on its surface and used as a nanocatalyst for the oxidative C(sp2)-H bond amination reaction. A practical method to prepare Cu2+supported onpara-aminobenzoic acid grafted on GO was reported. The prepared Cu2+@GO/PABA was characterized by FT-IR, XRD, SEM, AFM, TEM, UV-Vis, and ICP techniques. The results showed that the morphology, distribution, and loading of copper ions could be well-adjusted by grafting of PABA on GO. Moreover, just 2 mol% of Cu2+@GO-PABA could catalyze the C-H activation reaction of benzoxazole and benzothiazole with secondary amines in >94% yields. Also, the... 

Flat plate solar collectors lose a massive part of heat accumulated near the contact region because of the poor thermal characteristics of the working fluid. A new cost-effective design is numerically studied to cover up such deficiency by equipping the flat plate collector with revolutionary tubes and magnetic field inducer to affect Fe3O4/water working nanofluid in the collector tubes. Results substantiate that each of the applied rotary tubes and magnetic field inducer improves the convection mechanism in the tubes by circulating the flow inside the tubes and saves more of available solar energy. Results reveal that 27.8% and 10.44% of lost energy are restored in the solar collector... 

In the present study, the effects of rotary tubes and magnetic-induced nanofluid on heat transfer characteristics of a compact heat exchanger are individually investigated. Two-phase Eulerian model is employed to predict the hydrothermal and entropic characteristics of Fe3O4/water ferrofluid in the heat exchanger. Results indicate that utilizing each rotary tubes and magnetic field method can improve the energy and exergy efficiencies of the compact heat exchanger under specific circumstances by forming different types of secondary flow. It is found that employing each method individually can increase the maximum heat transfer rate by more than 60%. In comparison with methods like passive... 

Metal-oxide gas sensors are widely used for detection of detrimental H2S gas. Among them, SnO2-CuO system has been proved to be an excellent candidate. The previous theoretical 2D thin bilayer model was able to explain some aspects of H2S sensing performance of this promising system. However, experimental researches have indicated that response values for this system are very diverse and various SnO2-CuO multicomponent heterostructures such as rods, wires and particles have much higher response than their thin bilayer counterparts. Understanding the reason behind this differences would help fabrication of optimized sensor element. However, the previous model cannot address this issue mainly... 

Prostate cancer (PCa), the second most malignant neoplasm in men, is also the fifth leading cause of cancer-related deaths in men globally. Unfortunately, this malignancy remains largely asymptomatic until late-stage emergence when treatment is limited due to the lack of effective metastatic PCa therapeutics. Due to these limitations, early PCa detection through prostate-specific antigen (PSA) screening has become increasingly important, resulting in a more than 50% decrease in mortality. Conventional assays for PSA detection, such as enzyme-linked immunosorbent assay (ELISA), are labor intensive, relatively expensive, operator-dependent and do not provide adequate sensitivity.... 

Accumulative roll bonded (ARBed) AA1050 and Al-2 vol% SiCp (AMC) samples were anodized in an H2SO4 electrolyte to improve corrosion resistance. The SEM images revealed that the anodic oxide's morphology is significantly dependent on the microstructure of the ARBed bare samples, owing to high internal energy that accelerates Al consumption during anodizing process. Potentiodynamic polarization measurements and EIS evaluation showed that anodic oxide improves the corrosion resistance of both ARBed AA and AMC samples; however, the electrochemical behavior of the processed samples changed due to the formation of a complex oxide structure comprising of twisted pore channels and attack routes. ©... 

This paper presents a new symmetric slew rate enhancement (SRE) circuit suitable for operational transconductance amplifiers (OTAs). The proposed SRE circuit is composed of two auxiliary circuits which are automatically activated during fast signal transitions (slewing) by comparing the input and output signals. The auxiliary circuits pump required current in/out the load capacitance. In this way, the slew rate of the amplifier is significantly improved without any extra static power dissipation. The proposed technique can be applied to a variety of operational amplifiers. However, incorporating the proposed SRE circuit into a folded-cascode amplifier (FCA) results in 7× slew rate... 

The present work aims to fabricate cordierite/BZBS glass (Bi2O3-ZnO-B2O3-SiO2) composites through one-step heat treatment. Cordierite was synthesized from a solid-state reaction of aluminum hydroxide, magnesium hydroxide, and silica gel. BZBS glass was obtained through the classic melt quenching technique. Milled cordierite powder was mixed with different volume fractions of glass powders and heat treated at 950 °C. Considering the densification behavior along with the microwave dielectric features, two composites (C70G30 and C60G40) were chosen for further examination. These composites were separately heat treated at different temperatures from 650 up to 900 °C, then characterized due to... 

The synthesis of nanocomposites via in situ grafting polymerization due to its ability to produce polymeric materials with promising microscopic and macroscopic characteristics is becoming very attractive. In this paper, different poly(L-Lactide)-block-poly(ε-caprolactone) (PLLA-b-PCL) copolymers were in situ synthesized in the presence of modified titanium dioxide (TiO2) nanoparticles (mTNP) as the initiator and stannous octoate as the catalyst. The surface of TiO2 was modified by grafting aminopropyl trimethoxy silane to improve initiator efficiency. Copolymers with 90/10, 70/30, and 50/50 mass ratio of L-lactide/ ε-caprolactone and 5 wt% of mTNP (proportional to ε-caprolactone) were... 

Stability of Cassie-Baxter (CB) state is very critical in application of superhydrophobic surfaces. The most industrial applications of superhydrophobic surfaces are limited by the transition from the CB state to Wenzel (W) state. In this research, CB state stability of branched hierarchical ZnO nanowires (BH-ZnO NWs) was investigated as compared with ZnO nanowires (ZnO NWs) by using theoretical and experimental approaches. For this purpose, surface of the BH-ZnO NWs and ZnO NWs were modified by thin layers of methyltrimethoxysilane (MTMS). The MTMS thickness was optimized by varying NH4F (0, 5, 10, 20 μL) as used catalyst. The highest water contact angle (WCA) was measured at about 153 ± 3°... 

Hematite (α-Fe2O3) is a promising candidate for water oxidation applications due to its abundance in the earth crust and its suitable bandgap. However, hematite performance is severely limited by electron-hole recombination at its interface with the electrolyte; something that can be addressed using electrocatalysts. In this report, we evaluate the influence of a ternary NiFeCo co-catalyst to enhance the water oxidation performance of hematite photoanodes. Thus, NiFeCo co-catalyst is optimized for hematite thin films with i) dense and ii) porous (nano-rod) morphologies. Both hematite films are prepared using electron beam evaporation method followed by an annealing step and NiFeCo... 

In this research, Ag-Al2O3 nanostructures have been prepared via combustion synthesis and ammonium acetate and urea have been applied as fuels. The prepared Ag-Al2O3 nanostructures were characterized by DTA, XRD, SEM, TEM, and BET spectroscopy. The effect of different ratios of silver to alumina and fuel percentage on morphology and particle size of prepared products were investigated. The results showed that using ammonium acetate fuel led to the production of Ag-γ-Al2O3 nanocompounds, while using urea produced Ag-α-Al2O3. Also, the photocatalytic activity of Ag-Al2O3 nanostructures for Congo red degradation was evaluated by UV-Vis diffuse reflectance spectroscopy. The photocatalytic...