Sharif Digital Repository

In this study, antistatic waterborne polyurethane coating containing zirconia nanoparticles is made and applied on 304 stainless steel substrates at weight percentage of 0.66, 1.3, 3, 4.5 and 6% zirconia nanoparticles. For synthesis of hydrophilic isocyanate prepolymer, isocyanate prepolymer is modified by hydrophilic polyethylene glycol with molecular weight 600, 1000 and 4000. For ensuring of modification condition and stability of hydrophilic isocyanate prepolymer in aqua solution, FTIR and stability tests are employed, respectively. In order to create antistatic properties of these coatings, semi - conductive zirconia nanoparticles are used. To improve the distribution of zirconia... 

Recently, preparation of biofunctionalized nanoparticles with specific magnetic properties has received great attention for medical imaging. Targeting magnetic nanoparticles with high signal in magnetic resonance imaging (MRI) could be a powerful tissue imaging and cellular tracking agent. Main purpose of this research is the synthesis of Mn3O4@polymer composite nanoparticles as a positive MRI contrast agent. Nanoparticles were prepared by modified microwavepolyol and precipitation method with average particle size of 18 and 3nm.Respectivelythe effect of diffrent parameters such as time, surfactant and the presence of water in polyol method and the amount ofpolyethylene glycol as surfactant... 

Hemophilia is a group of hereditary genetic disorders that impair the body's ability to control blood clotting due to the lack of coagulation factors. Frequent joint and soft tissue bleeding is one the most common problems amongst these patients which can become progressively destructive for cartilage tissue in case of the late treatment. In this work, injectable PEG-based hydrogel nanocomposites with mechanical and structural properties close to cartilage tissue were fabricated. First, primary copolymers with PEG blocks of 600 g.mol-1 and 900 g.mol-1 without and with 2.5 wt.% Laponite nanoclay were synthesized by two-step thermal poly (amic acid) process. After polymer purification,... 

In the current research, colloidal stability of two different types of coating on the surface of Superparamagnetic Iron Oxide nanoparticles (SPIONs) was studied. In the first triumph, a dual-layer coating was achieved by utilizing optimum amount of Dextran and different PEG (Poly(ethylene glycol)) concentrations which the weight ratios of iron oxide/PEG were 1/1, 2/1, 4/1, 8/1, and 16/1. Then, the presence of the coating was characterized by XRD, FT-IR, DLS and FE-SEM methods. These results together with the TGA ones revealed that as the concentration of PEG surfactant increases, the thickness of coating increases. Moreover, VSM test was performed to specify the effect of coating on the... 

In recent years, the tendency to use biodegradable and biocompatible polymer nanoparticles for drug delivery applications has been increasing, the reason for this being the possibility of precise control of the drug release rate, ease of use, and no need for external Surgery after the release of the drug, increases the therapeutic efficiency of the drug and reduces the side effects with its precise transfer. In this research work, drug carrier nanocomposites were prepared from polylactic acid (PLA), polyethylene glycol (PEG) and hydroxyapatite (HAp) and for the controlled release of ciprofloxacin (CIP). It was used to treat bone infections. The drug loading efficiency for nano-carriers was... 

Semi-crystalline polylactic acid (PLA) and amorphous polymethyl methacrylate can form a soluble and miscible alloy in which the crystalline regions in the polylactic acid act as the fixed and immutable region and amorphous regions of the two polymers act as the changeable region. The two polymers can form a lattice structure with physical connections having shape-memory. So that the deformed polymer returns to its original shape above a certain temperature. These materials are used in sensors, smart materials, and medicine. On the other hand, Polyethylene glycol (PEG) is compatible with polylactic acid (PLA) and it seems that adding it will increase the ductility of polylactic acid (PLA). In... 

In recent years along with time and cost intensive process of developing new and better drugs for diseases like cancer, scientists and researchers are attempting to develop novel drug delivery systems for already existing drugs.The purpose of these novel drug delivery systems such as nanogels is controlling drug release rate as well as delivery to a specific target tissue in order to reduce side effects. One of the most commonly used drugs for cancer treatment is Doxorubicin HCl, commercially known as Adricin. In this project biodegradable and biocompatible polymers PLA and PEG were used to synthesize nanocarriers for Adricin. These nanocarriers were then dispersed in an agar hydrogel. The... 

Today, tissue engineering research is expanding to a large extent, so tissue engineering has the ability to build artificial organs and tissues. In this project, we have used two polymers of polyethylene glycol and polyvinyl chloride, which are used for network irradiation. After irradiation, these polymers were made by drying the freewheeling porous scaffolds and the effect of different parameters on the structure of these scaffolds was investigated. To investigate the effect of different factors on gelation, swelling, tensile test, degradability and finally the conditions of fibroplast cell growth on scaffolds were investigated. The results of the gel test showed that the gel was higher... 

Nanocomposites of PLA/Ag, PLA/PEG/Ag and PLA/PEG/Oleic acid were synthesized via chemical reduction of AgNO3.The formation of nano-silver particles (Ag-NPs) started in the aqueous phase (using NaBH4 as a reducing agent) followed by transfer of the silver nanoparticles into the organic phase (PLA solution in chloroform) due to the presence of van der waals interactions between the hydroxyl groups of the PLA and the particles charges surrounded in the surface of the Ag-NPs. The nanocomposites films were prepared by the solution casting method. The XRD patterns and UV-Vis spectra of the nanocomposites demonstrated face–centered cubic (fcc) silver crystals and spherical nanoparticles... 

In this project an enzymatic peroxidase biosensor based on two naono structured material 1-Polyaniline nananofibers 2-Polyethylene glycol-Poly citric acid copolymer was studied for phenol detection.Polyaniline nanofibers and poly ethylene glycol-poly citric acid copolymer were synthetized by chemical polymerization.Electrochemical behaviors of these biosensors were studied using cyclic voltammetry (CV) and amperometric techniques. The amperometric response of the coated electrodes is highly stable with 92% of the initial activity remaining after 5 determinations. These phenol biosensors show an oxidation peak at 0.55V. The amperometric response for phenol biosensor based on Polyaniline... 

The main strategy for treating solid cancers is based on the very early diagnosis of a malignant tumor, and in general the smaller the tumor, the greater the likelihood of successful treatment. Magnetic Resonance Imaging (MRI), based on the nuclear magnetic resonance phenomenon, provides the possibility of detecting early malignant tumors with the assistance of appropriate contrast agents. Hence, researchers continue to develop novel magnetic materials to achieve this aim. Superparamagnetic nanoparticles have become the focus of these studies because their superparamagnetic, biocompatible and hydrophilic properties would be revealed after modifying the particle surface by suitable... 

Application of nanoparticles in targeted delivery and controlled drug release is recently highly attracted especially in cancer therapy. In this study with the aim of developing a novel drug vector based on metallic nanoparticles, gold nanoparticles with their unique characteristics were used to design a vector for targeted anti-cancer drug delivery to tumor. First, gold nanoparticles were chemically synthesized therough sodium citrate and sodium brohydrate reductions with average diameters of 22 and 11 nm, respectively. Then, the activated poly ethylene glycol (PEG) and activated folic acid were conjugated to the lysine-capped gold nanoparticles. Subsequently, the widely used anticancer... 

In the first part of this work, citric acid monomer was selected to produce dendrimer through the divergent method using logical conditions (for controlling its functional groups) on the base of poly (ethylene glycol) as the core. Triblock copolymers (ABA-type) of citric acid and poly (ethylene glycol) (PCA-PEG-PCA) as biocompatible compounds were synthesized in four different molecular weights and applied as nanocarriers. The structure definition of the molecules and nanoparticles were carried out using different spectroscopy methods. Diameter of the synthesized copolymers was investigated using dynamic light scattering (DLS) experiments and transmission electron microscopy (TEM) and it was... 

In this study, a series of polyoxometalates nanoclusters is synthesized and their catalytic properties have been investigated in oxidation and coupling reactions. In the first and second sections, {Mo36} nanoclusters are primarily prepared. Then, the mesoporous silica, as a solid surface with a regular chanals and cavities through electrostatic interactions between polyoxo anions and amine functional groups with positive charge, is used to stabilize the nanocluster as well as the final structure of SBA-15-NH3 +•{Mo36}- formed. As a green and environmentally friendly substrate, natural zeolite is used to stabilize the nanoclusters and the {Mo36}@zeolite obtained. Both heterogeneous catalysts... 

The nanoparticles have been widely used in the field of physics, chemistry, electronics and mechanics because of their high surface area. One of their most important applications is in drug delivery systems as smart drug nanocarrier. Magnetic nanoparticles (including Fe2O3, Fe3O4) are the good candidates for this purpose. It is clear that, upon to entrance of nanoparticle into biological media (such as plasma), the surface of nanoparticles were covered by protein layers (protein corona). This layer is very stable and created new surface on the nanoparticles. The protein corona layer intracts with cellular receptors and determines the fate of nanoparticles. Protein corona covers the targeting... 

In this study, a novel electrospun modified polyamide (PA) based nanofibers were synthesized and employed as fibers coating for rapid determination of chlorophenols. The major polymer solution contained PA along with polyethylene glycol (PEG), acting as a side low molecular weight polymer. After production of the PA−PEG fiber coating, PEG was subsequently removed and modified by water which was confirmed by Fourier transform infra-red spectrometry.The scanning electron microscopy images showed anaverage diameter of 640 and 148 nmforPA and PA−PEG coatings, respectively while the latter coating structure was homogeneous and porous.The extraction efficiency of unmodified and modified coatings... 

In this project, Fe3O4 magnetic nanoparticles were prepared by co-precipitation method. For protecting them against oxidation and also avoiding from direct contact between core and additional materials that probably makes unwanted reactions, the surface of nanoparticles were coated by SiO2 layer. Being easy to modify and having the control of interactions between nanoparticles are the advantages of coating nanoparticles with silica. The obtained Fe3O4@SiO2 core-shell nanoparticles were covered by two types of polymer (PPG and PEG). The basis of the composite was characterized by VSM, TGA, SEM, XRD, and FT-IR analytical methods.
The antibacterial activities of Copper, Silver and Gold... 

Plasticizers in cementitious systems are additives that upon addition at a low dosage can change the workability, mechanical strength and other properties of cement paste effectively. In this study, tri-block copolymers based on poly ethylene glycol (PEG) was synthesised and their applications in the cementitious systems investigated. The main purpose is the verification of plasticizing effects of these copolymers in the cement paste. ABA tri-block copolymers with PEG (1000 and 1500 g/mol) as B block, poly caprolactone, poly caprolactam, poly lactide and poly glycolide (with different weight ratio) as A block were synthesised via ring opening polymerization with stannous octanoate as...